Influences of Hardened Aluminium HMMC on Tribological, Flexural and Impact Strength of Wheel Rim Element with Prognostications

• Autorzy: Kamatchisankaran S. , Bovas Herbert Bejaxhin Alphonse , Ramkumar Kathalingam , Ramanan Nandagopan

Identyfikatory

DOI

10.24425/amm.2024.150922

• Języki publikacji: EN

Abstrakty

EN

The primary goal of this research is to develop hybrid non-ferrous material composites with high flexural and impact strengths by testing the mechanical, thermal, and corrosion properties of AA 6061 wheel rims with various silicon carbide (SiC) and zirconium sulphide (ZrSO₄) compositions. This produces an alloy with high strength and perceptible hardenability that is used in a variety of marine space industries. Because of its exceptional strength-to-density ratio, it is a highly sought-after metal matrix composite in the automobile industry. This innovative composite material offers lower weight and higher impact strength when compared to the current wheel rim alloy. Designs of experiments based recommendations and results of simulations in order to prolong the life of the wheel rim.

Słowa kluczowe

EN

hybrid composite; heat treatment; hardening; wear test; wheel rim; ANSYS

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2024
• Tom: Vol. 69, iss. 3
• Strony: 1015--1025
• Opis fizyczny: Bibliogr. 25 poz., fot., rys., tab.

Twórcy

autor

Kamatchisankaran S.

• Meenakshi Sundararajan Engineering College, Department of Mechanical Engineering, Chennai, India

• https://orcid.org/0009-0002-7163-2980

autor

Bovas Herbert Bejaxhin Alphonse

• Saveetha School of Engineering, Department of Mechanical Engineering SIMATS, Chennai, India

• https://orcid.org/0000-0001-6188-3626

autor

Ramkumar Kathalingam

• Dhanalakshmi Srinivasan University, School of Engineering and Technology, Trichy, India

• https://orcid.org/0000-0001-8556-7265

autor

Ramanan Nandagopan

• PSN Engineering College, Tirunelveli, India

• https://orcid.org/0000-0002-1195-1616

Bibliografia

• [1] Nagavendra Kumarkanoje, Sathish C. Sharma, S.P. Harsha, EPFM Analysis of Subsurface Crack Beneath a Wheel Flat Using Dynamic Condition. Science Direct Proced. Matl. Sci. 6, 43-60 (2014).
• [2] A.T. Alpas, Sandeep Bhattacharya, Lan M. Hutching, Wear of Particulate Metal Matrix Composites Science Direct. Compr. Comp. Matl II, 4, 137-172 (2018).
• [3] Moona, Girija, R. Walia,Vikas, Rastogi, Sharma, Rina, Parametric optimization of fatigue behaviour of hybrid aluminium metal matrix composites. Matl.-Today: Proceedings 21, (2019). DOI: https://doi.org/10.1016/j.matpr.2019.10.002
• [4] P. Sriram Murthy, Y. Seetha Ram Rao, Impact on Mechanical Properties of Hybrid Aluminium Metal Matrix Composite. Int. Jour. of Engg. and Adv. Tech. (IJEAT) 8 (6), 1638-1645 (2019). ISSN: 2249-8958.
• [5] Justine Osange, Akaindapo, Jacob Olaitan, Development of Hybrid particle reinforced aluminium alloy metal matrix composite for the production of Break disc. Amer. Jour. of Engg. Research (AJER) 8 (9), 88-97 (2019). e-ISSN 2320-0847 p-ISSN 2320-0936
• [6] S. Patil, R.Robinson, B.P. Madhu, G.Manjunath, M.Kalyana Kumar, Investigation of Mechanical Properties and Wear behaviour of Lm 25 aluminium alloy reinforced with silicone carbide and Activated carbon, Int. Jour. of Research and Sci. Innov. (IJRSI) 5 (1), (2018). ISSN 2321-2705
• [7] G. Previati, F. Ballo, M. Gobbi, G. Mastinu, Radial impact test of aluminium Wheel - Numerical simulation and experimental validation. Int. Jour. of Impact Engg. Science Direct 126, 117-134 (2019).
• [8] Choongdo Lee, Science Direct, Effect of Strain rate on fatigue property of A356 aluminium casting alloys. Jour. of Mat. Engg. and Perf. 31 (2), 1-11 (2021). DOI: https://doi.org/10.1007/s11665-021-06297-9
• [9] Qian Gao, Yingchun Shan, Xiaofei Wan, Qizhang Feng, Xiandong Liu, 90 - degree impact bench test and simulation analysis of automotive steel wheel. Engineering Failure Analysis, Science Direct 105, 143-155 (2019).
• [10] Dey, Arthita, Jugade, Hrishikesh, Jain, Vaibav, Adhikary, Manashi, Cracking phenomena in automotive wheels: An insight. Engg Fail. Analysis. 105 (2019). DOI: https://doi.org/10.1016/j.engfailanal.2019.01.069
• [11] Y.H. Kim, T.K. Ryou, H.J. Choi, B.B. Hwang, An analysis of forging process for 6061 aluminium alloy wheels. Science Direct, Jour. of Matl. Process. Tech. 123, 270-276 (2002).
• [12] G. Ganesan, S. Magibalan, S. Gokul, K.P. Gopalakrishnan, S. Packiyaraj, Design and Fabrication of Disc Brake by using aluminium metal matrix composite. Jour. of Engg. Tech. and Innov. Research (JETIR) 4 (4) (2017). ISSN 2349-5162
• [13] Shipra Verma, P. Sudhakar Rao, Study of Mechanical behaviour of Aluminium 6061 Alloy based composite review. Jour. of Mech. and Civil. Engg. (IOSR - JMCE) 15 (4), v.3, 16-20 (2018). e-ISSN 2278-1684, p-ISSN 2320-334x.
• [14] Lei Chen, Shunping Li, Huiqin Chen, David M Salyor, Shuiguang Tong, Study on the design method of equal strength rim based on stress and fatigue analysis using Finite element analysis method. Advances in Mechanical Engineering 9 (3), 11 (2017).
• [15] P. Sureshkumar, T. Jagadeesha, L. Natrayan, M. Ravichadran, Dhinakaran Veeman, S.M. Muthu. Electrochemical corrosion and tribological behaviour of AA6063/Si3N4/Cu(NO3)2 Composite processed using single-pass ECAPA route with 120° die angle. Jour. of Matr. Research and Tech. 16, 715-733 (2022).
• [16] L. Natrayan, M. Senthil Kumar, A novel feeding technique in squeeze casting to improve the reinforcement mixing ratio. Mater. Today Proc. 46, 1335-1340 (2021).
• [17] S.M. Sivagami, A. Bovas Herbert Bejaxhin, R. Gayathri, T. Raja Vijay, K. Punitharani, P. Keerthi Vasan, M. Meignanamoorthy, On the Selection of a Composite Material for Two-Wheeler Foot Bracket Failure Prevention through Simulation and Mathematical Modeling. FDMP 18 (3), (2022). DOI: https://doi.org/10.32604/fdmp.2022.018752
• [18] Vasudeva Rao, P. Periyaswamy, A. Bovas Herbert Bejaxhin, E. Naveen, N. Ramanan, and Aklilu Teklemariam, Wear Behavioural Study of Hexagonal Boron Nitride and Cubic Boron Nitride-Reinforced Aluminum MMC with Sample Analysis, Hindawi, Journal of Nanomaterials. Article ID 7816372, 10 pages (2022). DOI: https://doi.org/10.1155/2022/7816372
• [19] N. Muthu Mekala, C. Balamurugan, A. Bovas Herbert Bejaxhin, Deform 3D Simulation and Experimental Investigation of Fixtures with Support Heads”. Mechanika 28 (2), 130-138 (2022). DOI: http://dx.doi.org/10.5755/j02.mech.29468
• [20] A. Bovas Herbert Bejaxhin, G.M. Balamurugan, S.M. Sivagami, K. Ramkumar, V. Vijayan, S. Rajkumar, Tribological Behavior and Analysis on Surface Roughness of CNC Milled Dual Heat Treated Al6061 Composites. Advances in Materials Science and Engineering, Article ID 3844194, 14 (2021). DOI: https://doi.org/10.1155/2021/3844194
• [21] V.P. Srinivasan, Ch. Sandeep, C. Shanthi, A. Bovas Herbert Bejaxhin, R. Anandan, M. Abisha Meji, Comparative Study on EDM Parameter Optimization for Adsorbed Si3N4-TiN using toPSIS and Coupled with TLBO Algorithm. Abso. Sci. & Technology, Article ID 4112448, 19 (2022). DOI: https://doi.org/10.1155/2022/4112448
• [22] Y. Brucely, Y.C. Shaji, A.B.H. Bejaxhin, M. Abeens, Online acoustic emission measurement of tensile strength and wear rate for AA8011-TiC-ZrB2 hybrid composite. Surface Topography: Metrology and Properties 10 (4), 045009 (2022).
• [23] C.B. Priya, K. Ramkumar, V. Vijayan , A. Bovas Herbert Bejaxhin, Wear Studies on Mg-5Sn-3Zn-1Mn-xSi Alloy and Parameters Optimization using the INTEGRATED RSM-GRGA Method. Silicon 15, 3569-3579 (2023). DOI: https://doi.org/10.1007/s12633-022-02243-z
• [24] H. Koten, O. Kamaci, (2023). Time-Dependent Corrosion Resistance Investigation of Hydrophobic Magnesium Alloys. In: Emamian, S.S., Awang, M., Razak, J.A., Masset, P.J. (eds) Advances in Material Science and Engineering. Lecture Notes in Mechanical Engineering. Springer, Singapore. DOI: https://doi.org/10.1007/978-981-19-3307-3_24
• [25] A. Bovas Herbert Bejaxhin, R.B. Rayappa, H. Koten, R. Balasubramanian, D.U. Sarwe, Comparative Design and CFD analysis of 3-D Printed Acrylonitrile Butadiene Styrene nozzle Aerator for Discharge Reduction. Thermal Science 26 (2), 857-869 (2022).