Sensorless vector-control system with the correction of stator windings asymmetry in induction motor

• Autorzy: Zagirnyak M. , Kalinov A. , Melnykov V

Warianty tytułu

PL

Bezczujnikowe wektorowe sterowanie silnikiem indukcyjnym z korekcją asymetrii uzwojeń

• Języki publikacji: EN

Abstrakty

EN

Estimation of induction motor stator windings asymmetry influence on power and dynamic characteristics of sensorless vector control systems is performed. A system of vector control in a three-phase coordinate system is developed. This system makes it possible to compensate for induction motor windings asymmetry by correction of flux linkage assignment.

PL

Analizowano wpływ asymetrii uzwojeń twornika silnika indukcyjnego na właściwości dynamiczne przy sterowaniu bezczujnikowym. Badano układ silnika trójfazowego. Przedstawiono metody korekcji wpływu asymetrii uzwojeń.

Słowa kluczowe

EN

asymmetry; stator winding; power characteristic; vector control system

PL

silnik indukcyjny; sterowanie bezczujnikowe; asymetria

• Wydawca: Wydawnictwo SIGMA-NOT
• Czasopismo: Przegląd Elektrotechniczny
• Rocznik: 2013
• Tom: R. 89, nr 12
• Strony: 340--343
• Opis fizyczny: Bibliogr. 11 poz., rys., tab., wykr.

Twórcy

autor

Zagirnyak M.

• Kremenchuk Mykhailo Ostrohradskyi National University and the Chairman and the Professor of Electric Machines Department Mykhaylo Zagirnyak, Pervomayskaya str. 20, Kremenchuk, Ukraine, 39600

autor

Kalinov A.

• Kremenchuk Mykhailo Ostrohradskyi National University and the Chairman and the Professor of Electric Machines Department Mykhaylo Zagirnyak, Pervomayskaya str. 20, Kremenchuk, Ukraine, 39600

autor

Melnykov V

• Kremenchuk Mykhailo Ostrohradskyi National University and the Chairman and the Professor of Electric Machines Department Mykhaylo Zagirnyak, Pervomayskaya str. 20, Kremenchuk, Ukraine, 39600

Bibliografia

• [1] Janda Z., Jankovic M., Bebic J., Vukosavich S. and Vuckovich V., The Realization of a Novel Speed-Sensorless Induction Motor Drive, Proc. IECON '94, V.3, pр. 1621–1626.
• [2] Zagirnyak M., Mamchur D. and Kalinov A., Comparison of induction motor diagnostic methods based on spectra analysis of current and instantaneous power signals, Przeglad Elektrotechniczny ISSN 0033-2097, Issue 12b/2012, pp. 221–224.
• [3] Benbouzid Mohamed El Hachemi and Kliman G.B., What Stator Current Processing-Based Technique to Use for Induction Motor Rotor Faults Diagnosis?, IEEE Transactions on Energy Conversion, VOL. 18, NO. 2, pp. 238–244, June 2003.
• [4] El-Arabawy I.F., Masoud M.I. and Mokhtari A.E., Stator interturn faults detection and localization using stator currents and concordia patterns – neural network applications, Proc. IEEE Int. Conf.- Workshop on CPE, pp. 1–7, May 29 - Jun. 1, 2007.
• [5] Drobnič K., Nemec M., Fišer R., Ambrožič V. Simplified detection of broken rotor bars in induction motors controlled in field reference frame Control Engineering Practice, No. 20 (2012), pp. 761–769.
• [6] Costa Branco P.J. and Ferraz J., Influence of constant values and motor parameters deviations on the performance of the adaptive sliding-mode observer in a sensorless induction motor drive, Progress In Electromagnetics Research B, Vol. 34, 2011, pp. 225–245.
• [7] Holtz J., Sensorless Control of Induction Motor Drives, Proceedings of the IEEE, Vol. 90, No. 8, рр. 1359–1394. August 2002.
• [8] Iqbal M., Bhatti A.I., Ayubi S.I. and Khan Q., Robust parameter estimation of nonlinear systems using sliding-mode differentiator observer, IEEE Transactions on Industrial Electronics, Vol. 58, №. 2, рр. 680–689, Feb. 2011.
• [9] Andrzej M. Trzynadlowsk, Control of induction motors, Academic Press, New York, 2001. – 226 p.
• [10] Kubota H. and Matsuse K. Regenerationg-Mode Low-Speed Operation of Sensorless Induction Motor Drive With Adaptive Observer, IEEE Transactions on Industry Applications, vol. 38, no. 4, pp. 1081-1086, July/August 2002.
• [11] Melnykov V. and Kalinov A., The increasing of energy characteristics of vector-controlled electric drives by means of compensation for the induction motor parametrical asymmetry, Tehnichna electrodinamika. 2012, № 3, pp. 85-86. ISSN 1607-7970.