A modelling of AC voltage stabilizer based on a hybrid transformer with matrix converter

• Autorzy: Szcześniak P.

Identyfikatory

DOI

10.1515/aee-2017-0028

• Języki publikacji: EN

Abstrakty

EN

This article presents a study of an AC voltage stabilizer based on a three-phase hybrid transformer combined with a matrix converter. The proposed solution is used to control AC voltage amplitude and phase shift. By adjustment of these voltage parameters we can reduce the effects of overvoltage, voltage dips or lamp flicker. Such negative phenomena are very significant, particularly from the perspective of the final consumer and sensitive loads connected to the power network. Often the voltage in the power system can be adjusted using a mechanical or thyristor controlled regulator, which in a stepwise manner switches the taps of the electromagnetic transformer. The method for obtaining continuous control of the voltage magnitude and phase shift with the use of a conventional transformer with two output windings and a matrix converter is presented in this paper. The operating principles, mathematical model and properties of the proposed voltage stabilizers are discussed in this paper. The main part of the article will be devoted to the mathematical model which is based on an averaged equation. Computer simulation results are presented and compared with the results of a mathematical study.

Słowa kluczowe

EN

AC voltage stabilizer; averaged model; hybrid transformer; matrix converter

• Wydawca: Polish Academy of Sciences, Committee on Electrical Engineering
• Czasopismo: Archives of Electrical Engineering
• Rocznik: 2017
• Tom: Vol. 66, nr 2
• Strony: 371--382
• Opis fizyczny: Bibliogr. 25 poz., rys., wz.

Twórcy

autor

Szcześniak P.

• Institute of Electrical Engineering, University of Zielona Góra Licealna 9, 65-417 Zielona Góra, Poland

Bibliografia

• [1] EN 50160, Voltage characteristics of electricity supplied by public distribution systems (2007).
• [2] IEEE Standard 1159, Recommended practice for monitoring electric power quality (2009).
• [3] Mahela O., Shaik A.G., Gupta N., A critical review of detection and classification of power quality events, Renewable & Sustainable Energy Reviews, vol. 41, pp. 495-505 (2015).
• [4] Jurado F., Saenz J.R., Detecting transient voltage stability and voltage sag, COMPEL, The International Journal for Computation and Mathematics in Electrical and Electronic Engineering, vol. 23, no. 2, pp. 392-409 (2004).
• [5] Ekström R., Thomas K., Leijon M., Fast solid-state on-load tap change using two currentcontrolled voltage-source inverters, IET Power Electronics, vol. 7, no. 10, pp. 2610-2617 (2014).
• [6] Choi J-H., Moon S-I., The dead band control of LTC transformer at distribution substation, IEEE Transactions on Power Systems, vol. 24, no. 1, pp. 319-326 (2009).
• [7] Nielsen J.G., Blaabjerg F., A Detailed comparison of system topologies for dynamic voltage restorers, IEEE Transactions on Industrial Applications, vol. 41, no. 5, pp. 1272-1280 (2005).
• [8] Torres A.P., Roncero-Sánchez P., del Toro García X., Batlle V.F., Generalized proportional-integral controller for dynamic voltage restorers, COMPEL, The International Journal for Computation and Mathematics in Electrical and Electronic Engineering, vol. 31, no. 6, pp.1964-1984 (2012).
• [9] Benysek G., Improvement in the quality of delivery of electrical energy using PE systems, Springer (2007).
• [10] Kaniewski J. Szcześniak P., Jarnut M., Benysek G., Hybrid Voltage Sag/Swell Compensators: A Review of Hybrid AC/AC Converters, IEEE Industrial Electronics Magazine, vol. 9, no. 4, pp. 37-48 (2015).
• [11] Kaniewski J., Fedyczak Z., Benysek G., AC voltage sag/swell compensator based on three-phase hybrid transformer with buck-boost matrix-reactance chopper, IEEE Transactions on Industrial Electronics, vol. 61, no. 8, pp. 3835-3846 (2014).
• [12] Szcześniak P., Kaniweski J., Hybrid transformer with matrix converter, IEEE Transactions on Power Delivery, vol. 31, no. 3, pp. 1388-1396 (2016).
• [13] Burkard J., Biela J., Evaluation of topologies and optimal design of a hybrid distribution transformer, European Conference on Power Electronics and Applications, EPE'15 ECCE Europe, Geneva, Switzerland, pp. 1-10 (2015).
• [14] Rodriguez J., Rivera M., Kolar J.W., Wheeler P.W., A review of control and modulation methods for matrix converters, IEEE Transactions on Industrial Electronics, vol. 59, no. 1, pp. 58-70 (2012).
• [15] Szcześniak P., Kaniewski J., Jarnut M., AC-AC power electronic converters without DC energy storage: a review, Energy Conversion and Management, vol. 92, pp. 483-497 (2015).
• [16] Szcześniak P., Kaniewski J., Power electronics converters without DC energy storage in the future electrical power network, Electric Power Systems Research, vol. 129, pp. 194-207 (2015).
• [17] Kaniewski J., Fedyczak Z. Szcześniak P., Three-phase hybrid transformer using matrix-chopper as an interface between two AC voltage sources, Archives of Electrical Engineering, vol. 63, no. 2, pp. 197-210 (2014).
• [18] Montero-Hernandez O.C., Enjeti P.N., Application of a boost AC/AC converter to compensate forvoltage sags in electric power distribution systems, Power Electronics Specialists Conference PESC 2000, Galway, Ireland, pp. 470-475 (2000).
• [19] Aeoliza E.C., Enjeti N.P., Moran L.A., Montero-Hernandez O.C., Kim S., Analysis and design of a novel voltage sag compensator for critical loads in electrical power distribution systems, IEEE Transactions on Industrial Applications, vol. 39, no. 4, pp. 1143-1150 (2003).
• [20] Choi N., Li Y., Modeling and analysis of ac line conditioner based on three-phase PWM Ćuk ac-ac converter, Annual Conference of the IEEE Industrial Electronics Society, IECON’04, Busan, Korea, pp. 1646-1651 (2004).
• [21] Minh-Khai N., Young-Cheol L., Joon-Ho C., Single-phase Z-source based voltage sag/swell compensator, Applied Power Electronics Conference and Exposition, APEC’13, Long Beach, USA, pp. 3138-3142 (2013).
• [22] Szcześniak P., A static and dynamic model of a space vector modulated matrix-reactance frequency converter, Electric Power Systems Research, vol. 108, pp. 82-92 (2014).
• [23] Korotyeyev. I,Y., Fedyczak Z., Steady and transient states modelling methods of matrix-reactance frequency converter with buck-boost topology, COMPEL, The International Journal for Computation and Mathematics in Electrical and Electronic, vol. 28, no. 3, pp. 626-638 (2009).
• [24] Lozano J.M., Ramirez J.M., Correa R.E., A novel dynamic voltage restorer based on matrix converters, Modern Electric Power Systems, MEPS’10, Wroclaw, Poland, pp. 1-7 (2010).
• [25] Wheeler P.W., Rodriguez J, Clare J.C., Empringham L., Weinstejn A., Matrix converters: a technology review, IEEE Transactions on Industrial Electronics, vol. 49, no. 2, pp.276-288 (2002).

Uwagi

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę (zadania 2017).