PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Correlations between basic physical parameters of nuts and the weight of common beech (Fagus sylvatica L.) seeds

Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
Selected physical attributes of common beech nuts harvested from four tree stands in northern Poland were determined. Seeds were manually extracted from every nut. Seeds and nuts were weighed, and the results were used to determine the ratio of seed weight to nut weight, which described the degree of nut filling. Physical parameters and the calculated coefficients were compared by the t-test for independent samples, analysis of variance, correlation analysis and linear regression analysis. The following ranges of variation were reported in the physical attributes of nuts and the coefficients of common beech seeds: critical transport velocity of nuts - from 6.33 to 11.28 m s-1, nut thickness - from 4.76 to 9.86 mm, nut width - from 6.46 to 13.54 mm, nut length - from 12.63 to 21.62 mm, angle of sliding friction of nuts - from 15.67 to 26.67o, nut weight - from 93.0 to 513.7 mg, coefficient of sliding friction of nuts - from 0.28 to 0.50, seed weight - from 11.0 to 374.8 mg, and ratio of seed weight to nut weight - from 0.08 to 0.88. The majority of nuts contained one seed (average weight of 195.36 mg), and only 2.3% of nuts contained two seeds (average weight of 103.11 mg). The attribute that was most highly correlated with the ratio of seed weight to nut weight was seed weight (0.685), followed by critical transport velocity (0.527) and weight of nuts (0.493). The results indicate that common beech seeds would be processed most effectively in vibration-pneumatic separators or, alternatively, in pneumatic separators where nut fractions obtained with the use of mesh screens can be sorted separately.
Słowa kluczowe
Rocznik
Tom
Strony
5--14
Opis fizyczny
Bibliogr. 31 poz., tab., wykr.
Twórcy
  • Department of Heavy Duty Machines and Research Methodology, University of Warmia and Mazury in Olsztyn
autor
  • Department of Forest Work Mechanization, University of Agriculture in Kraków
autor
  • Department of Heavy Duty Machines and Research Methodology, University of Warmia and Mazury in Olsztyn
autor
  • Department of Heavy Duty Machines and Research Methodology, University of Warmia and Mazury in Olsztyn
autor
  • Department of Heavy Duty Machines and Research Methodology, University of Warmia and Mazury in Olsztyn
autor
  • Department of Heavy Duty Machines and Research Methodology, University of Warmia and Mazury in Olsztyn
Bibliografia
  • AHMADI R., KALBASI-ASHTARI A., GHARIBZAHEDI S.M.T. 2012. Physical properties of psyllium seed. International Agrophysics, 26: 91-93.
  • ALTUNTAS E., DEMIRTOLA H. 2007. Effect of moisture content on physical properties of some grain legume seeds. New Zealand Journal of Crop and Horticultural Science, 35: 423-433.
  • ALTUNTAŞ E., ÖZGÖZ E., TAŞER Ö.F. 2005. Some physical properties of fenugreek (Trigonella foenumgraceum L.) seeds. Journal of Food Engineering, 71: 37-43.
  • AMIN M.N., HOSSAIN M.A., ROY K.C. 2004. Effects of moisture content on some physical properties of lentil seeds. Journal of Food Engineering, 65: 83-87.
  • BODYŁ M., SUŁKOWSKA M. 2007. Estimation of European beech (Fagus sylvatica L.) seed differentiation in Poland in the years 1992-2004. Sylwan, 9: 12-21.
  • BOGDZIEWICZ M., WRÓBEL A. 2012. Ecological aspects of mast seeding in trees. Kosmos Problemy Nauk Biologicznych, 61(4): 667-675.
  • BOLTE A., CZAKOWSKI T., KOMPA T. 2007. The north-eastern distribution range of European beech - a review. Forestry, 80: 413-429.
  • BRUS D.J., HENGEVELD G.M., WALVOORT D.J.J., GOEDHART P.W., HEIDEMA A.H., NABUURS G.J., GUNIA K. 2012. Statistical mapping of tree species over Europe. European Journal of Forest Research, 131: 145-157.
  • ÇALIŞIR S., ÖZCAN M., HACISEFEROĞULLARI H., YILDIZ M.U. 2005. A study on some physico-chemical properties of Turkey okra (Hibiscus esculenta L.) seeds. Journal of Food Engineering, 68: 73-78.
  • DITTMAR C., ZECH W., ELLING W. 2003. Growth variations of Common beech (Fagus sylvatica L.) under different climatic and environmental conditions in Europe - a dendroecological study. Forest Ecology and Management, 173: 63-78.
  • FALLERI E., PACELLA R. 1997. Applying the IDS method to remove empty seed in Platanus acerifolia. Canadian Journal of Forest Research, 27: 1311-1315.
  • GROCHOWICZ J. 1994. Maszyny do czyszczenia i sortowania nasion [Seed cleaning and storting machines]. AR, Lublin.
  • HILTON G.M., PACKHAM J.R. 2003. Variation in the masting of common beech (Fagus sylvatica) in northern Europe over two centuries (1800-2001). Forestry (Oxford), 76: 319-328.
  • JACOBO-VALENZUELA N., MORÓSTICA-JUNIOR M.R., ZAZUETA-MORALES J.J., GALLEGOS-INFANTE J.A. 2011. Physicochemical, technological properties, and health-benefits of Cucurbita moschata Duchense vs. Cehualca. Food Research International, 44: 2587-2593.
  • JAWORSKI A. 2011. Hodowla lasu. Tom III. Charakterystyka hodowlana drzew i krzewów leśnych. PWRiL, Warszawa.
  • JOSHI D.C., DAS S.K., MUKHERJEE R.K. 1993. Physical properties of pumpkin seeds. Journal of Agricultural Engineering Research, 54(3): 219-229.
  • KALINIEWICZ Z., GRABOWSKI A., LISZEWSKI A., FURA S. 2011. Analysis of correlations between selected physical attributes of Scots pine seeds. Technical Sciences, 14(1): 13-22.
  • KALINIEWICZ Z., POZNAŃSKI A. 2013. Variability and correlation of selected physical attributes of small-leaved lime (Tilia cordata Mill.) seeds. Sylwan, 157(1): 39-46.
  • KALINIEWICZ Z., TYLEK P., ANDERS A., MARKOWSKI P., RAWA T., OŁDAKOWSKI M., WĄSOWSKI Ł. 2015. An analysis of the physical properties of seeds of selected deciduous tree species. Baltic Forestry (in press).
  • KONAK M., ÇARMAN K., AYDIN C. 2002. Physical properties of chick pea seeds. Biosystems Engineering, 82(1): ι73-78.
  • MAGRI D. 2008. Patterns of post-glacial spread and the extent of glacial refugia of European beech (Fagus sylvatica). Journal of Biogeography, 35: 450-463.
  • Nasiennictwo leśnych drzew i krzewów iglastych. 1995. Ed. A. Załęski. Oficyna Edytorska „Wydawnictwo Świat”, Warszawa.
  • OHEIMB G. VON, WESTPHAL C., TEMPEL H., HÄRDTLE W. 2005. Structural pattern of a near-natural beech forest (Fagus sylvatica) (Serrahn, North-east Germany). Forest Ecology and Management, 212: 253-263.
  • OMOBUWAJO T.O., SANNI L.A., OLAJIDE J.O. 2000. Physical properties of ackee apple (Blighia sapida) seeds. Journal of Food Engineering, 45: 43-48.
  • ÖVERGAARD R., GEMMEL P., KARLSSON M. 2007. Effects of weather conditions on mast year frequency in beech (Fagus silvatica L.) in Sweden. Forestry, 80(5): 555-565.
  • RABIEJ M. 2012. Statystyka z programem Statistica [Statisctics in Statistica software]. Helion, Gliwice.
  • RUSCOE W.A., ELKINTON J.S., CHOQUENOT D., ALLEN R.B. 2005. Predation of beech seed by mice: effects of numerical and functional responses. Journal of Animal Ecology, 74: 1005-1019.
  • SUSZKA B., MULLER C., BONNET-MASIMBER M. 2000. Nasiona leśnych drzew liściastych od zbioru do siewu. Wydawnictwo Naukowe PWN, Warszawa-Poznań.
  • TYLEK P. 2006. Friction and elasticity as separation properties of beech nuts. Sylwan, 5: 51-58.
  • TYLEK P. 2010. Physical and biological aspects of the mechanical separation of seeds of the common beech (Fagus sylvatica L.). Zeszyty Naukowe Uniwersytetu Rolniczego im. Hugona Kołłątaja w Krakowie, 467. Rozprawy, 344. Wydawnictwo Uniwersytetu Rolniczego, Kraków.
  • TYLEK P. 2011. Analysis of aerodynamic properties of common fir and common beech. Inżynieria Rolnicza, 6(131): 247-253.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-22e87298-7293-40c1-b195-eef46de41416
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.