PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Stresses in coating with gradient interlayer caused by contact loading

Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
The three-dimensional problem of elasticity concerning inhomogeneous half-space under normal and tangential loading applied in circular region was considered. The half-space is composed of the homogeneous body and double-layer coating which includes a homogeneous top coat and a gradient interlayer. The solution method is based on the two-dimensional integral Fourier transform. The influence of mechanical properties of coatings component and coefficient of friction on the first principal stress distribution was considered.
Rocznik
Strony
33--37
Opis fizyczny
Bibliogr. 23 poz., rys., wykr.
Twórcy
  • Faculty of Mechanical Engineering, Department of Mechanics and Applied Computer Science, Bialystok University of Technology ul. Wiejska Street 45C, 15-351 Bialystok, Poland
autor
  • Faculty of Mechanical Engineering, Department of Mechanics and Applied Computer Science, Bialystok University of Technology ul. Wiejska Street 45C, 15-351 Bialystok, Poland
Bibliografia
  • 1. Aizikovich S.M., Alexandrov V.M., Kalker J.J., Krenev L.I., Trubchik I.S. (2002) Analytical solution of the spherical indentation problem for a half-space with gradients with the depth elastic properties, Int. J. Solids Struct., 39, 2745–2772.
  • 2. Bragallini G.M., Cavatorta M.P., Sainsot P. (2003) Coated contact: a strain approach, Tribology Int., 36, 935-941.
  • 3. Choi H. J. (2009) On the plane contact problem of a functionally graded elastic layer loaded by a frictional sliding flat punch, Mechanics Research Communications, Arch Appl Mech, 78, 267– 282.
  • 4. Diao D.F., Sawaki Y., Suzuki H. (1996) Effect of interlayer on maximum contact stresses of hard coating under sliding contact, Surface and Coatings Technology, 86-87, 480-485.
  • 5. Fischer-Cripps A.C. (2003) Analysis of instrumented indentation test data for functionally graded materials, Surface & Coatings Technology, 168, 136-141.
  • 6. Giannakopoulos A.E., Pallot P. (2000) Two-dimensional contact analysis of elastic graded materials, J. Mech. Phys. Solids, 48, 1597– 1631.
  • 7. Giannakopoulos A.E., Suresh S. (1997) Indentation of solids with gradients in elastic properties: Part II. Axisymetric indenters, Int. J. Solids and Structures, 34, 2392–428.
  • 8. Guler M.A., Erdogan F. (2004) Contact mechanics of graded coatings, Int. J. Solids Struct., 41, 3865-3889.
  • 9. Guler M.A., Erdogan F. (2006) Contact mechanics of two deformable elastic solids with graded coatings, Mechanics of Materials, 38, 633-647.
  • 10. Guler M.A., Erdogan F. (2007) The frictional sliding contact problems of rigid parabolic and cylindrical stamps on graded coatings, Int. J. Mech. Sci., 49, 161-182.
  • 11. Kashtalyan M., Menshykova M. (2009) Effect of a functionally graded interlayer on three-dimensional elastic deformation of coated plates subjected to transverse loading, Composite Structures, 89, 167–176.
  • 12. Kashtalyan M., Menshykova M., Guz I.A. (2009) Use of a Functionally Graded Interlayer to Improve Bonding in Coated Plates, Journal of Adhesion Science and Technology, 23, 1591– 1601. acta mechanica et automatica, vol.8 no.1 (2014), DOI 10.2478/ama-2014-0006
  • 13. Ke L.L., Wang Y.S. (2006) Two-dimensional contact mechanics of functionally graded materials with arbitrary spatial variations of material properties, Int. J. Solids Struct., 43, 5779-5798.
  • 14. Ke L.L., Wang Y.S. (2007) Two-dimensional sliding frictional contact of functionally graded materials, Eur. J. of Mech. A/Solids, 26, 171-188.
  • 15. Kulchytsky-Zhyhailo R., Bajkowski A. (2011) Elastic half space with inhomogeneous coating under the action of tangential forces, Materials Science, 46(6), 735-746.
  • 16. Kulchytsky-Zhyhailo R., Bajkowski A. (2012) Analytical and numerical methods of solution of three-dimensional problem of elasticity for functionally graded coated half-space, Int. J. Mech. Sci., 54, 105-112.
  • 17. Kulchytsky-Zhyhailo R., Rogowski G. (2009) Axially symmetric contact problem of pressing of an absolutely rigid ball into an elastic half space with inhomogeneous coating, Materials Science, 45(6), 845-858.
  • 18. Kulchytsky-Zhyhailo R., Rogowski G. (2010) Stresses in hard coating due to a rigid spherical indenter on a layered elastic half-space, Tribology International, 43(9), 1592-1601.
  • 19. Lijesh K.P., Amirthagadeswaran K.S. (2010) Optimizing interlayer and coated film thickness for minimum stress distribution under elastohydrodynamic lubrication condition, Proceedings of the International Conference on Frontiers in Automobile and Mechanical Engineering, 328-334.
  • 20. Liu T.J., Wang Y.S. (2008) Axisymmetric frictionless contact problem of a functionally graded coating with exponentially varying modulus, Acta Mechanica, 199, 151-165.
  • 21. Liu T.J., Wang Y.S. (2009) Reissner-Sagoci problem for functionally graded materials with arbitrary spatial variation of material properties, Mechanics Research Communications, 36, 322-329.
  • 22. Liu T.J., Wang Y.S., Zhang C. (2008) Axisymmetric frictionless contact of functionally graded materials, Mechanics Research Communications, Arch Appl Mech, 78, 267–282.
  • 23. Schwarzer N., Richter F., Hecht G. (1999) The elastic field in a coated half-space under Hertzian pressure distribution, Surf. Coat. Technol., 114, 292-304
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-22adba5c-3841-4789-b09c-b675ba656cd9
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.