Mechanical and thermal properties of cotton-bamboo fabric/glass fiber epoxy composites

• Autorzy: Chandrasekaran Kailasam , Shanmugam Periyasamy , Senthilkumar Palanisamy

Identyfikatory

DOI

10.14314/polimery.2022.11.4

Warianty tytułu

PL

Właściwości mechaniczne i termiczne kompozytów epoksydowych wzmocnionych tkaniną bawełniano-bambusową i włóknem szklanym

• Języki publikacji: EN

Abstrakty

EN

Five-layer epoxy composites consisting of two outer layers made of glass fiber and three inner layers of cotton-bamboo fabric were obtained by compression molding. The influence of cotton-bamboo fabric/glass fiber content (35, 40, 45 and 50 wt%) and the order of stacking laminate layers on the mechanical properties (tensile, flexural, compressive, impact strength), thermal properties (TGA) and structure (FTIR, SEM) of the composites was investigated. The best mechanical and thermal properties were obtained with the content of 45 wt% cotton-bamboo fabric/glass fiber.

PL

Metodą prasowania tłocznego otrzymano pięciowarstwowe kompozyty epoksydowe składające się z dwóch warstw zewnętrznych wykonanych z włókna szklanego oraz trzech wewnętrznych z tkaniny bawełniano-bambusowej. Zbadano wpływ zawartości włókna szklanego (35, 40, 45 i 50% mas) oraz kolejności układania warstw laminatu na właściwości mechaniczne (wytrzymałość na rozciąganie, zginanie i ściskanie oraz udarność), termiczne (TGA) oraz strukturę (FTIR, SEM) kompozytów. Najlepsze właściwości mechaniczne i termiczne uzyskano przy zawartości 45% mas. włókna szklanego.

Słowa kluczowe

EN

cotton-bamboo fabric; glass fiber; epoxy resin; composites

PL

tkanina bawełniano-bambusowa; włókno szklane; żywica epoksydowa; kompozyty

• Wydawca: Sieć Badawcza Łukasiewicz – Instytut Chemii Przemysłowej
• Czasopismo: Polimery
• Rocznik: 2022
• Tom: Vol. 67, nr 11-12
• Strony: 567--574
• Opis fizyczny: Bibliogr. 36 poz., rys., tab., wykr.

Twórcy

autor

Chandrasekaran Kailasam

• Department of Mechanical Engineering, K.S.R College of Engineering, Tiruchengode, Namakkal, Tamilnadu 637215, India

• https://orcid.org/0000-0003-1322-0523

autor

Shanmugam Periyasamy

• Department of Mechanical Engineering, Arulmurugan College of Engineering, Thennilai, Karur, Tamil Nadu 639206, India

• https://orcid.org/0000-0001-6211-1169

autor

Senthilkumar Palanisamy

• Department of Mechanical Engineering, K.S.R College of Engineering, Tiruchengode, Namakkal, Tamilnadu 637215, India

• https://orcid.org/0000-0002-5982-8983

Bibliografia

• [1] Albayrak D., Seki Y., Balcı Kılıç G. et al.: Journal of Natural Fibers 2022, 19(16), 12614. https://doi.org/10.1080/15440478.2022.2073498
• [2] Köktaş S., Yasin Keskin Ö., Dalmiş R. et al.: Journal of Natural Fibers 2022, 19(16), 14328. https://doi.org/10.1080/15440478.2022.2064389
• [3] Belaadi A., Amroune S., Seki Y. et al.: Journal of Natural Fibers 2022, 19(15), 12235. https://doi.org/10.1080/15440478.2022.2054895
• [4] Vijay R., Dhilip J.D.J., Gowtham S. et al.: Journal of Natural Fibers 2020, 19(4), 1343. https://doi.org/10.1080/15440478.2020.1764457
• [5] Keskin O.Y., Dalmis R., Balci Kilic G. et al.: Cellulose 2020, 27, 9963. https://doi.org/10.1007/s10570-020-03498-8
• [6] James D.J.D., Manoharan S., Saikrishnan G. et al.: Journal of Natural Fibers 2020, 17(10), 1497. https://doi.org/10.1080/15440478.2019.1581119
• [7] Raghunathan V., Dhilip J.D.J., Ramesh M. et al.: Journal of Natural Fibers 2022, 19(14), 9681. https://doi.org/10.1080/15440478.2021.1990183
• [8] Dalmis R., Kilic G.B., Seki Y. et al.: Cellulose 2020, 27, 8621. https://doi.org/10.1007/s10570-020-03385-2
• [9] Mylsamy B., Palaniappan S.K., Pavayee Subramani S. et al.: Journal of Materials Research and Technology 2019, 8(6), 6021. https://doi.org/10.1016/j.jmrt.2019.09.076
• [10] Mylsamy B., Chinnasamy V., Palaniappan S.K. et al.: Journal of Materials Research and Technology 2020, 9(6), 16423. https://doi.org/10.1016/j.jmrt.2020.11.100
• [11] Cicala G., Cristaldi G., Recca G. et al.: Materials & Design 2009, 30(7), 2538. https://doi.org/10.1016/j.matdes.2008.09.044
• [12] Arbelaiz A., Fernández B., Cantero G. et al.: Composites Part A: Applied Science and Manufacturing 2005, 36(12), 1637. https://doi.org/10.1016/j.compositesa.2005.03.021
• [13] Thwe M.M., Liao K.: Composites Science and Technology 2003, 63(3-4), 375. https://doi.org/10.1016/S0266-3538(02)00225-7
• [14] Sathishkumar T.P., Naveen J., Navaneethakrishnan P. et al.: Journal of Industrial Textiles 2017, 47(4), 429. https://doi.org/10.1177/1528083716648764
• [15] Xu X., Jayaraman K., Morin C. et al.: Journal of Materials Processing Technology 2008, 198(1-3), 168. https://doi.org/10.1016/j.jmatprotec.2007.06.087
• [16] John K., Venkata Naidu S.: Journal of Reinforced Plastics and Composites 2004, 23(12), 1253. https://doi.org/10.1177/0731684404035270
• [17] Hamidon M.H., Sultan M.T.H., Ariffin A.H.: Failure Analysis in Biocomposites, Fibre-Reinforced Composites and Hybrid Composites 2018, 133. https://doi.org/10.1016/B978-0-08-102293-1.00007-3
• [18] Ahmed K.S., Vijayarangan S.: Journal of Materials Processing Technology 2008, 207(1-3), 330. https://doi.org/10.1016/j.jmatprotec.2008.06.038
• [19] Cheung H.-y., Ho M.-p., Lau K.-t. et al.: Composites Part B: Engineering 2009, 40(7), 655. https://doi.org/10.1016/j.compositesb.2009.04.014
• [20] Aruchamy K., Pavayee Subramani S., Palaniappan S.K. et al.: Journal of Materials Research and Technology 2020, 9(1), 718. https://doi.org/10.1016/j.jmrt.2019.11.013
• [21] Aruchamy K., Subramani S.P., Palaniappan S.K. et al.: Journal of Natural Fibers 2022, 19(1), 105. https://doi.org/10.1080/15440478.2020.1731903
• [22] Almeida J.H.S., Amico S.C., Botelho E.C. et al.: Composites Part B: Engineering 2013, 55, 492. https://doi.org/10.1016/j.compositesb.2013.07.014
• [23] Alavudeen A., Rajini N., Karthikeyan S. et al.: Materials & Design (1980-2015) 2015, 66, Part A, 246. https://doi.org/10.1016/j.matdes.2014.10.067
• [24] Kumar A., Singh S.: Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 2015, 229(3), 202. https://doi.org/10.1177/1464420713507915
• [25] Rafiquzzaman M., Islam M., Rahman H. et al.: Polymers for Advanced Technologies 2016, 27(10), 1308. https://doi.org/10.1002/pat.3798
• [26] Shrivastava R., Telang A., Rana R.S. et al.: MaterialsToday: Proceedings 2017, 4(2), Part A, 3477. https://doi.org/10.1016/j.matpr.2017.02.237
• [27] Doan T.T.L., Brodowsky H., Mäder E.: Composites Science and Technology 2007, 67(13), 2707. https://doi.org/10.1016/j.compscitech.2007.02.011
• [28] Joseph P.V., Joseph K., Thomas S. et al.: Composites Part A: Applied Science and Manufacturing 2003, 34(3), 253. https://doi.org/10.1016/S1359-835X(02)00185-9
• [29] Mwaikambo L.Y., Ansell M.P.: Journal of Applied Polymer Science 2002, 84(12), 2222. https://doi.org/10.1002/app.10460
• [30] Tserki V., Zafeiropoulos N.E., Simon F. et al.: Composites Part A: Applied Science and Manufacturing 2005, 36(8), 1110. https://doi.org/10.1016/j.compositesa.2005.01.004
• [31] Jamaludin M.I.H., Jamian S., Awang M.K. et al.: IOP Conference Series: Materials Science and Engineering 2020, 824, 012019. https://doi.org/10.1088/1757-899X/824/1/012019
• [32] Tay C.H., Mazlan N., Thariq M. et al.: Journal of Materials Research and Technology 2021, 15, 4415. https://doi.org/10.1016/j.jmrt.2021.10.062
• [33] Liu W., Mohanty A.K., Askeland P. et al.: Polymer 2004, 45(22), 7589. https://doi.org/10.1016/j.polymer.2004.09.009
• [34] Braga R.A., Magalhaes P.A.A.: Materials Science and Engineering C 2015, 56, 269. https://doi.org/10.1016/j.msec.2015.06.031
• [35] Sanjay M.R., Arpitha G.R., Senthamaraikannan P. et al.: Journal of Natural Fibers 2019, 16(4), 600. https://doi.org/10.1080/15440478.2018.1431828
• [36] Sanjay M.R., Yogesha B.: Journal of Industrial Textiles 2018, 47(7), 1830. https://doi.org/10.1177/1528083717710713