Influence of electromagnetic treatment of the mineral filler on properties of the adhesive compositions for plywood production

• Autorzy: Anisimov M. , Belchinskaya L. , Sedliačik J.
• Języki publikacji: EN

Abstrakty

EN

Influence of electromagnetic treatment of the mineral filler on properties of the adhesive compositions for plywood production. The influence of pre-activation of natural mineral filler zeolite (clinoptilolite) in the electromagnetic microwave field (EMF) and in a weak pulsed magnetic field (IMP) on the physical, mechanical and chemical properties of adhesive compositions were investigated. The differences in the mechanisms of exposure of EMF and IMP on mineral filler in adhesive composition were identified. Decrease of free formaldehyde content from cured adhesive composition is 23 %. Increase of acidity and reduction of gel time were determined. Addition of clinoptilolite into the adhesive composition increases the strength of the adhesive layer: at untreated sample by 6 %, treated in a weak IMP by 14 % and activated in EMF by 23 %.

Słowa kluczowe

EN

microwave electromagnetic field; weak pulsed magnetic field; natural zeolite; clinoptilolite; formaldehyde emission; adhesive composition; strength of the adhesive layer; plywood; gel time; acidity

• Wydawca: Wydawnictwo Szkoły Głównej Gospodarstwa Wiejskiego w Warszawie
• Czasopismo: Annals of Warsaw University of Life Sciences - SGGW. Forestry and Wood Technology
• Rocznik: 2014
• Tom: No. 88
• Strony: 7--13
• Opis fizyczny: Bibliogr. 27 poz.

Twórcy

autor

Anisimov M.

• Department of Chemistry, Voronezh State Academy of Forestry and Technologies, Russia

autor

Belchinskaya L.

• Department of Chemistry, Voronezh State Academy of Forestry and Technologies, Russia

autor

Sedliačik J.

• Technical University, Faculty of Wood Sciences and Technology, Masaryka 24, 960 53 Zvolen, Slovakia

Bibliografia

• 1. CHERKASOV G.S. 2003: Mastering CE - marking in the production of domestic plywood production. Woodworking promty. № 3. p. 10-11.
• 2. Preparation of Russian plywood enterprises to CE marking of products - the main issue of the meeting fanerschikov. Woodworking promty. 2004. № 3. p. 20-24.
• 3. LARIONOV V., IVANOV: Environmental Housing Problems and Prospects. Academia. Architecture and Construction.
• 4. VIRPSHA Z., BZHEZINSKY J. 1973: Khimiya. Moscow, 343 p.
• 5. ENGLISH B., STARK N., CLEMONS C. 1997: Weight reduction: wood versus mineral fillers in polypropylene. In: Fourth International Conference on Wood-Plastic Composites, Forest Product Society, Madison, WI, May 12-14, p. 237-244.
• 6. KLESOV A. 2010: Wood-polymer composites. Fundamentals and Technologies, 736 p.
• 7. BELCHINSKAYA L.I., ANISIMOV M.V. 2012: Effect of nanofillers adhesive composition for environmentally sound plywood. Scientific Bulletin. Construction and architecture. № 1.
• 8. BELCHINSKAYA L.I. 2002: Nature protection technology disposal and recycling of furniture production. Voronezh. Reg. lesotehn. Acad., p. 210.
• 9. CHELISHCHEV, N.F., BERENSTEIN B.G., VOLODIN V.F. 1987: Zeolites - a new type of mineral raw materials. Moscow: Nedra, 176 p.
• 10. HODOSOVA N.A. 2009: Reducing the concentration of formaldehyde in the environment aluminosilicate sorbents: the dissertation thesis Ivanovo. 197 p.
• 11. ANISIMOV M.V., BELCHINSKAYA L.I., STROKOVA K.V., SEDLIAČIK J., PETUKHOVA G.A. 2013: Neutralization of waste water from formaldehyde and heavy metals by activated clinoptilolite in electromagnetic fields. In: Adhesives in woodworking industry. Technical University in Zvolen. p. 80-85.
• 12. ANISIMOV M.V., STRUKOV S., SCHATILOFF E.A., BELCHINSKAYA L.I. 2012: Activation of clinoptilolite in electromagnetic fields for wastewater treatment formaldehyde. In Actual problems of chemical engineering and environmental protection: a collection Russian conference materials, Cheboksary, p. 39-40.
• 13. SOLODKII N.F., SHAMRIKOV A.S., POGREBENKOV V.M. 2009: Mineral resources base of the Urals for ceramic, refractory and glass industries. Handbook. Tomsk: TPU 332 p.
• 14. DERFFEL, K. 1998: Statistics in Analytical Chemistry. 268 p.
• 15. VERSHININ V.I., PEPPERS N.V. 2005: Planning and mathematical treatment of the results of chemical experiment. Study Guide Omsk Univ OmSU. 216 p.
• 16. Belchinskaya L.I., Hodosova N.A., Bityutskaya L.A. 2009: Formaldehyde adsorption on mineral nanoporous sorbents treated with pulsed magnetic field. Physical Chemistry of Surfaces and protection materials. . V 45. No 2. p. 218-221.
• 17. LIPTÁKOVÁ E., SEDLIAČIK M. 1989: Chémia a aplikácia pomocných látok v drevárskom priemysle Bratislava, 520 p.
• 18. GOST 9621-94. 1994: Laminated glued wood. Methods for determination of physical properties. Standards Press.
• 19. GOST 14231-88. 1988: Urea-formaldehyde resin. Standards Press. 28 p.
• 20. SHENDRIKOV M. A. 2011: Improving the strength of adhesive joints of wood glue by modifying the electric field: Voronezh, 17 p.
• 21. BUCHACHENKO A.L., MOLIN Y.N., SAGDEEV R.S., SALIKHOV K.M., FRANKIEWICZ E.L. 1987: Magnetic spin effects in chemical reactions, "Physics-Uspekhi" t.151, № 1, USSR Academy of Sciences.
• 22. BUCHACHENKO A.L. 1976: Magnetic field effects in chemical reactions, "Progress of 13 Chemistry".
• 23. BUCHACHENKO A.L. 1974: Chemical polarization of electrons and nuclei, "Nauka".
• 24. PERSIAN A.Y., KUZEEV I.R., ANTIPIN V.A. 2001: On the influence of pulsed field Magnin on the mechanical properties of polymeric fibers. Chemistry and Computational Simulation. Butlerov Communications, No 4.
• 25. BING B.H., SAVIN A.V. 2003: Physical Effects of weak magnetic fields on biological systems. Physics-Uspekhi. T.173. № 3. -p. 265-300.
• 26. TARASEVICH, Y.I. 1988: Structure and surface chemistry of layered silicates. Kiev. Naukova Dumka, 248 p.
• 27. POBEDINSKII V.S. 2000: Activating textile finishing processes energy electromagnetic waves RF, microwave and UV. Ivanovo ISC RAS, p. 128.

Uwagi

Opracowanie rekordu ze środków MEiN, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2022-2023).