The effect of reference plane on values of areal surface topography parameters from cylindrical elements

• Autorzy: Podulka P. , Dobrzański P. , Pawlus P. , Lenart A.

Identyfikatory

DOI

10.2478/mms-2014-0021

• Języki publikacji: EN

Abstrakty

EN

In this paper distortion of surface topography measurement results by improper selection of the reference plane is taken into consideration. The following types of surfaces from cylindrical elements were analyzed: cylinder liners after plateau honing, cylinder liners with additionally burnished oil pockets and turned piston skirts. Surface topographies of these elements after a low wear process were also studied. In order to obtain areal surface topography parameters, the form was eliminated using cylinders and polynomials of the following degrees: 2, 3, 4, 6, 8, 10 and 12. Parameters of surfaces after form removal were compared. After analysis of results the reference elements for each kind of surface were recommended. A special procedure was proposed in order to select the degree of a polynomial. This method is based on surface topography changes with increase of polynomial degree. The effect of improper form elimination on measuring uncertainty was studied.

Słowa kluczowe

EN

surface topography; reference element; cylinder liners; oil pockets; piston skirts

• Wydawca: Komitet Metrologii i Aparatury Naukowej PAN
• Czasopismo: Metrology and Measurement Systems
• Rocznik: 2014
• Tom: Vol. 21, nr 2
• Strony: 247--256
• Opis fizyczny: Bibliogr. 19 poz., rys., tab., wykr.

Twórcy

autor

Podulka P.

• Rzeszow University of Technology, Faculty of Mechanical Engineering and Aeronautics, al. Powstańców Warszawy 12, 35-959 Rzeszow, Poland

autor

Dobrzański P.

• Rzeszow University of Technology, The Faculty of Management, al. Powstańców Warszawy 12, 35-959 Rzeszow, Poland

autor

Pawlus P.

• Rzeszow University of Technology, Faculty of Mechanical Engineering and Aeronautics, al. Powstańców Warszawy 12, 35-959 Rzeszow, Poland

autor

Lenart A.

• Pratt & Whitney AeroPower Rzeszów, Hetmanska 120, 35-078 Rzeszow, Poland

Bibliografia

• [1] Dagnall, H., 1986, Exploring Surface Texture. Rank Taylor Hobson Limited, Leicester, UK.
• [2] Blunt, L., X. Jiang (ed.). (2003). Advanced Techniques for Assessment of Surface Topography. Kogan Pages, London.
• [3] Stout, K. J. (ed). (1994). Three-dimensional surface topography - measurement, interpretation and application. Penton Press, London.
• [4] Stout, K. J., Sullivan, P. J., Dong, W. P., Mainsah, E., Luo, N., Mathia, T., Zahouani, H. 1993, The Development of Methods for the Characterisation of Roughness in Three Dimensions. Publication EUR 15178 EN Commission of the European Communities.
• [5] Thomas, T. R. (1999). Rough Surfaces. Second Edition, Imperial College Press, London.
• [6] Whitehouse, D. J. (1994). Handbook of Surface Metrology. Bristol and Philadelphia: Inst. of Physics.
• [7] Whitehouse, D. J. (2001). Surfaces and Their Measurement. Hermes Penton, London.
• [8] Pawlus, P. (2002). The errors of surface topography measurement using stylus instruments. Metrology and Measurement Systems, 3, 273-289.
• [9] Whitehouse, D. J. (2011). Surface metrology today: complicated, confusing, effective. Proceedings of the 13th International Conference on Metrology and Properties of Engineering Surfaces, Twickenham Stadium, UK, 1-10.
• [10] Raja, J., Muralikrishnan B, Fu S. (2002). Recent advances in separation of roughness, waviness and form. Precision Engineering, 26, 222-235.
• [11] Brinkman, S., Bodschwinna H.:Advanced Gaussian filters. In: Blunt L., Jiang X. (eds). (2003). Advanced Techniques for Assessment Surface Topography. Kogan Page Science, London and Sterling, 62-89.
• [12] Brinkman, S., Bodschwinna, H., Lemke, H.-W. (2000). Development of a robust Gaussian regression filter for three-dimensional surface analysis. X International Colloquium on Surfaces, Chemnitz, Germany. 122-131.
• [13] Dobrzański, P., Pawlus, P. (2011). A study of filtering techniques for areal surface topography assessment. Proceedings of the Institution of mechanical Engineers. Part B. Journal of Engineering Manufacture, 225, 2096-2107.
• [14] Nilsson, B., Rosen, B. -G., Thomas, T. R., Wiklund, D., Xiao, L. (2004). Oil pockets and surface topography: mechanism of friction reduction. XI International Colloquium on Surfaces, Chemnitz, Germany, Addendum.
• [15] Etsion, I. (2005). State of the art in laser surface texturing. ASME Journal of Tribology, 125, 248-253.
• [16] Grabon, W., Pawlus, P., Galda, L., Dzierwa, A., Podulka, P. (2011). Problems of surface topography with oil pockets analysis. Journal of Physics: Conference Series, 311 (1), art. no. 012023.
• [17] Johansson, S., Nilsson, P. H, Ohlsson, R., Anderberg, C., Rosen, B. -G. (2008). New cylinder liner surfaces for low oil consumption. Tribology International, 41, 854-859.
• [18] Pawlus, P. (1994). A study on the functional properties of honed cylinder surface during running-in. Wear, 176, 247-254.
• [19] Pawlus, P. (1993). Effects of honed cylinder surface topography on the wear of piston-piston ring-cylinder assemblies under artificially increased dustiness conditions. Tribology International, 26, 49-56.