Performances in tank cleaning

• Autorzy: Panaitescu V. A. , Panaitescu M. , Panaitescu F. V. , Martes L.

Identyfikatory

DOI

10.12716/1001.12.01.18

• Języki publikacji: EN

Abstrakty

EN

There are several operations which must do to maximize the performance of tank cleaning. The new advanced technologies in tank cleaning have raised the standards in marine areas. There are many ways to realise optimal cleaning efficiency for different tanks. The evaluation of tank cleaning options means to start with audit of operations: how many tanks require cleaning, are there obstructions in tanks (e.g. agitators, mixers), what residue needs to be removed, are cleaning agents required or is water sufficient, what methods can used for tank cleaning. After these steps, must be verify the results and ensure that the best cleaning values can be achieved in terms of accuracy and reliability. Technology advancements have made it easier to remove stubborn residues, shorten cleaning cycle times and achieve higher levels of automation. In this paper are presented the performances in tank cleaning in accordance with legislation in force. If tank cleaning technologies are effective, then operating costs are minimal.

Słowa kluczowe

EN

tank cleaning; ship operation; chemicals; impact cleaning; rinsing; ultra-violet spectroscopy; MARPOL; Permanganate Time Test (PTT)

• Wydawca: Faculty of Navigation, Gdynia Maritime University
• Czasopismo: TransNav : International Journal on Marine Navigation and Safety of Sea Transportation
• Rocznik: 2018
• Tom: Vol. 12, no. 1
• Strony: 159--163
• Opis fizyczny: Bibliogr. 7 poz., rys., tab.

Twórcy

autor

Panaitescu V. A.

• Maritime University, Constanta, Romania

autor

Panaitescu M.

• Maritime University, Constanta, Romania

autor

Panaitescu F. V.

• Thome Shipping, Constanta, Romania

autor

Martes L.

• Romanian Seafarers Center, Constanta, Romania

Bibliografia

• 1 CSM‐L&I‐IMEC, 2016. Chemical tanker training. In Student  guide‐tank cleaning, Constanta:pp. 30‐58
• 2 http://www. alfalaval. com. 2016. Tank cleaning ‐planning.  In Th.Ah. Tank cleaning‐guide: pp. 2‐7.
• 3 Jensen,  B.B.  et  al.  2011‐2012.  Tank  Cleaning  Technology:  Innovative application to improve clean‐in‐place (CIP).  In EHEDG 2012: pp. 26‐30
• 4 Panaitescu, F.V., Panaitescu, M., Voicu, I.&Panaitescu, I.I.  2014. Training for environmental risks in the Black Sea  Basin. In the International Journal on Marine Navigation  and Safety of Sea Transportation TransNav, vol.8, no.2 2014. 
• 5 Sinner,  H.  1959.  The  Sinner  Circle  “TACT”.  In  Sinner’s  Cleaning Philosophy, Henkel. 
• 6 Sørensen, O. & Andersen, J. Acc. 2016. Controlling hygienic  tank cleaning using hygienic sensors to monitor tank  cleaning. In Alfa Laval Magazine‐Thinking Ahead :pp. 5‐7
• 7 http://www.tankjet.com..2016.  Optimizing  tank  cleaning  operations.  In  Optimizing  tank  cleaning  catalog  no15,  Introduction:pp.1‐8 

Uwagi

Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2018).