Computer aided design of cutting tools

• Autorzy: Matuszak J. , Barszcz M.

Identyfikatory

DOI

10.12913/22998624/60796

• Języki publikacji: EN

Abstrakty

EN

Correct and stable machining process requires an appropriate cutting tool. In most cases the tool can be selected by using special tool catalogs often available in online version. But in some cases there is a need to design unusual tools, for special treatment, which are not available in tool manufacturers’ catalogs. Proper tool design requires strength and geometric calculations. Moreover, in many cases specific technical documentation is required. By using Computer Aided Design of cutting tools this task can be carried out quickly and with high accuracy. Cutting tool visualization in CAD programs gives a clear overview of the design process. Besides, these programs provide the ability to simulate real machining process. Nowadays, 3D modeling in CAD programs is a fundamental tool for engineers. Therefore, it is important to use them in the education process.

Słowa kluczowe

EN

cutting tools; computer-aided design

• Wydawca: Lublin University of Technology ; Polish Society of Ecological Engineering (PTIE), Branch of PTIE in Lublin
• Czasopismo: Advances in Science and Technology. Research Journal
• Rocznik: 2015
• Tom: Vol. 9, nr 28
• Strony: 107--111
• Opis fizyczny: Bibliogr. 10 poz., fig.

Twórcy

autor

Matuszak J.

• Department of Production Engineering, Mechanical Engineering Faculty, Lublin University of Technology, Nadbystrzycka 36 Str., 20-618 Lublin, Poland

autor

Barszcz M.

• Department of Fundamentals of Technology, Technology Fundamentals Faculty, Lublin University of Technology, Nadbystrzycka 38 Str., 20-618 Lublin, Poland

Bibliografia

• 1. Chiang, C.-J. and Fong Z.-H., Design of form milling cutters with multiple inserts for screw rotors. Mechanism and Machine Theory, 45(11), 2010, 1613–1627.
• 2. Cichosz P., Narzędzia skrawające. WNT, Warszawa 2006.
• 3. Górski E. and Harasymowicz J., Podstawy projektowania narzędzi skrawających wraz z zagadnieniami technologicznymi. PWN, Warszawa 1980.
• 4. Grzesik W., Podstawy skrawania materiałów konstrukcyjnych. WNT, Warszawa 2010.
• 5. Kazimierczak G., Pacula B., Budzyński A., Solid Edge: Komputerowe wspomaganie projektowania. Wydawn. Helion 2004.
• 6. Kim J.H., Park J.W., Ko T.J., End mill design and machining via cutting simulation. Computer-Aided Design, 40(3), 2008, 324–333.
• 7. Liu J.-Y. and Chang S.-L., Design of hob cutters for generating helical cutting tools with multi-cutting angles. International Journal of Machine Tools and Manufacture, 43(12), 2003, 1185–1195.
• 8. Matuszak J., The program to generate the geometry of forming tools with division into class of workpiece. Postępy Nauki i Techniki, 2011, 127–132.
• 9. Olszak W., Obróbka skrawaniem. WNT, Warszawa 2009.
• 10. Zagórski I. and Barszcz M., Virtual machines in education – CNC milling machine with sinumerik 840d control system. Adv. Sci. Technol. Res. J. 8(24), 2014, 32–37.