Prediction of Tribocorrosive Properties of ADI Containing Ni-Cu-Mo

• Autorzy: Wieczorek A. N. , Stachowiak A. , Zwierzycki W.

Identyfikatory

DOI

10.24425/123820

• Języki publikacji: EN

Abstrakty

EN

In the case of mining machines, tribocorrosion damage is often observed. This type of consumption is caused by the joint action of mining environment factors such as abrasive and water. The search for methods to counteract tribocorrosion is of great practical importance, but it must be combined with the knowledge of methods of forecasting the value of wear. This paper presents a model of prediction of tribocorrosive wear adapted to corrodible materials – ADI containing Ni and Cu, with the strength class of 800 MPa – and results of a two-stage study on the tribocorrosive wear. Presented results indicate a distinct effect of synergy between friction and corrosion in the total wear of ADI. The tribocorrosion tests confimed the adequacy of the model developed for the ADI.

Słowa kluczowe

EN

ADI; tribocorrosion; wear

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2018
• Tom: Vol. 63, iss. 3
• Strony: 1417--1422
• Opis fizyczny: Bibliogr. 26 poz., rys., tab., wzory

Twórcy

autor

Wieczorek A. N.

• Silesian University of Technology, Institute of Mining Mechanization, Gliwice, Poland

autor

Stachowiak A.

• Poznań University of Technology, Institute of Machines And Motor Vehicles, 5 M. Skłodowskiej-Curie Sq., 60-965 Poznan, Poland

autor

Zwierzycki W.

• Poznań University of Technology, Institute of Machines And Motor Vehicles, 5 M. Skłodowskiej-Curie Sq., 60-965 Poznan, Poland

Bibliografia

• [1] R. Burdzik, P. Folęga, B. Łazarz, Z. Stanik, J. Warczek, Archives of Metallurgy and Materials 57 4, 987-993 (2012).
• [2] A. N. Wieczorek, Management Systems in Production Engineering 17, 28-34 (2015).
• [3] A. N. Wieczorek, Archives of Metallurgy and Materials 59, 16651674 (2014).
• [4] A. N. Wieczorek, Archives of Metallurgy and Materials 59, 16751683 (2014).
• [5] D. Myszka, A. N. Wieczorek, Archives of Metallurgy and Materials 60, 483-490 (2015).
• [6] D. Myszka, L. Cybula, A. N. Wieczorek, Archives of Metallurgy and Materials 59, 1181-1189 (2014).
• [7] A. N. Wieczorek, W. Polis, Management Systems in Production Engineering 19, 175-178, (2015).
• [8] A. N. Wieczorek, A. Stachowiak, W. Zwierzycki, Archives of Metallurgy and Materials 63, 87-97 (2018).
• [9] M. T. Mathew, P. Srinivasa, R. Pourzal, A. Fischer, Advances in Tribology, 1-12 (2009).
• [10] M. Madej, Wear 317, 179-187 (2014).
• [11] Cz. Kajdas, A. Kulczycki, D. Ozimina, Tribology International 107, 144-151 (2017).
• [12] T. A. Adler, R. P. Walters, Corrosion Science 33, 1855-1876 (1992).
• [13] H. Abd-El-Kader, S. M. El-Raghy, Corrosion Science 26, 647-653 (1986).
• [14] H. Abd-El-Kader, S. M. El-Raghy, M. E. Abou El-Hassan, British Corrosion Journal 19, 139-142 (1984).
• [15] P. Jemmely, S. Mischler, D. Landolt, Tribology International 32, 295-303 (1999).
• [16] P. Jemmely, S. Mischler, D. Landolt, Wear 237, 63-76 (2000).
• [17] G. E. Lazarev, Trenie i Iznos 2, 223-230 (1987).
• [18] G. P. Cherepanov, Fizyko-Chimiceskaja Mechanika Materialov 1, 3-6 (1987).
• [19] J. Jiang, M. M. Stack, A. Neville, Tribology International 35, 669679 (2002).
• [20] N. Papageorgiou, S. Mischler, Tribology Letters 48, 271-283 (2012).
• [21] S. Yin, D. Y. Li, Tribology Letters 29, 45-52 (2008).
• [22] A. Stachowiak, W. Zwierzycki, Tribology International 44 10, 1216-1224 (2011).
• [23] A. Stachowiak, W. Zwierzycki, Wear 294, 277-285 (2012).
• [24] A. Stachowiak, W. Zwierzycki, P. Tyczewski, Wear 352, 146-154 (2016).
• [25] A. Stachowiak, Tribocorrosion wear models in sliding pairs (Problemy modelowania zużywania tribokorozyjnego w układach ślizgowych). Wydawnictwo Naukowe Instytutu Technologii Eksploatacji – PIB, Radom, 2012.
• [26] A. N. Wieczorek, Report „Development of the innovative technology of conveyor chutes routes using robotic methods“, No. POIG.01.04.00-24-05-057/13.

Uwagi

EN

1. The study was carried out as a part of the project “Innovative technology for production of tension members for transport systems with the use of cast materials”, No. POIG.01.04.00-24-100/11 and “Development of the innovative technology of conveyor chutes routes using robotic methods”, No. POIG.01.04.00-24-05-057 / 13.

PL

2. Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2018).