Armature control of a DC motor based on programmable logic controller

• Autorzy: Hamoodi Safwan A. , Hamoodi Ali N. , Hameed Farah I.

Warianty tytułu

PL

Sterowanie twornikiem silnika prądu stałego w oparciu o programowalny sterownik logiczny

• Języki publikacji: EN

Abstrakty

EN

A design and implementation of separately excited DC motor speed measurement using programmable logic controller (PLC) techniques is established alternatively of using imitative mechanical ways. The techniques available in PLC type (SIEMENS, LOGO! 230RC) are enough to achieve this connection and measure the speed with a simple way. separately excited DC motor speeds were taken according to speed meter (Autonics, MP5W). In this paper, the PLC armature resistive controlled and the traditional armature resistive control have been investigated for controlling the speed of DC separately excited motor. By comparison the obtained results for both methods, it appeared that the results are approximately similar but the suggested system is much simpler than the imitative system.

PL

Opracowano projekt i implementację pomiaru prędkości silnika obcowzbudnego prądu stałego przy użyciu technik programowalnego sterownika logicznego (PLC) alternatywnie z wykorzystaniem imitacyjnych metod mechanicznych. Techniki dostępne w typie PLC (SIEMENS, LOGO! 230RC) wystarczą, aby osiągnąć to połączenie i zmierzyć prędkość w prosty sposób. Prędkości silnika obcowzbudnego prądu stałego przyjęto zgodnie z prędkościomierzem (Autonics, MP5W). W tym artykule zbadanio sterowanie rezystancyjne twornika PLC i tradycyjne sterowanie rezystancyjne twornika do kontrolowania prędkości silnika oddzielnie wzbudzanego DC. Porównując otrzymane wyniki dla obu metod okazało się, że wyniki są w przybliżeniu podobne, ale proponowany system jest znacznie prostszy niż system imitacyjny.

Słowa kluczowe

EN

separately excited DC motor; armature control; PLC; timer setting; speed control

PL

silnik prądu stałego; PLC; twornik

• Wydawca: Wydawnictwo SIGMA-NOT
• Czasopismo: Przegląd Elektrotechniczny
• Rocznik: 2022
• Tom: R. 98, nr 5
• Strony: 110--114
• Opis fizyczny: Bibliogr. 25 poz., rys., tab.

Twórcy

autor

Hamoodi Safwan A.

• Northern Technical University, Technical College of Engineering /Mosul

• https://orcid.org/+0000-0003-1742-6959

autor

Hamoodi Ali N.

• Northern Technical University, Technical College of Engineering /Mosul

• https://orcid.org/0000-0003-0991-3538

autor

Hameed Farah I.

• Northern Technical University, Technical College of Engineering /Mosul

• https://orcid.org/0000-0003-1275-1517

Bibliografia

• [1] Kandahar M., Junejo A., Saand A., Speed Control of DC Series Motor with Conventional and PLC Techniques, International Journal of Information Technology and Electrical Engineering, 5(2016), No. 4, 21-26.
• [2] Pawar R., Shirke Y., Titare P., Speed Control of DC Motor UsingProgrammable Logic Controller, International Journal of Advanced Research in Engineering & Management, 3(2017), No. 2, 14-16.
• [3] Amiri P., Bagheri M., Speed Control of DC Motor by Programmable Logic Control with High Accuracy, Universal Journal of Control and Automation, 1(2013), No. 4, 91-97.
• [4] Thabet H., Qasim M., Measurement of A DC Series Motor Torque Based On PLC Techniques, Kufa Journal of Engineering, 7(2016), No. 1, 93-103.
• [5] Safwan A., Ibrahim I., Rasha. A., A Comparison Between PID Controller and ANN Controller for Speed Control of DC Motor, IEEE 2nd International Conference on Electrical, Communication, Computer, Power and Control Engineering, (2010) 221-224.
• [6] El-Din A., PLC-Based Speed Control of DC Motor, CES/IEEE 5th International Power Electronics and Motion Control Conference IPEMC,2(2006), pp. 1-6.
• [7] Malviya P., Dubey M., Speed Control of DC Motor a Review, International Journal of Engineering Sciences & Research Technology, 5(2015), 298-305.
• [8] Safwan A., Bashar M., Rasha A., DC Motor Speed Control Using PID Controller Implementation by Simulink and Practical, International Journal of Electrical Engineering,11(2018), No.1, 39-49.
• [9] Mishra G., Pandey A., Maurya A., Combined Armature and Field Speed Control of DC Motor for Efficiency Enhancement, International Journal of Electrical and Electronics Engineering (SSRG-IJEEE), 1(2014), No. 6, 344-352.
• [10] Sharma Sh., Oberoi S., Nair S., Speed Control Method of DC Series Motor, International Journal of Innovative Research in Technology, 1(2014), No. 6, 287-293.
• [11] Ioannides M., Design and Implementation of PLC Based Monitoring Control System for Induction Motor, IEEE,19(2004), No.3, 469-476.
• [12] Sysala T., Dostal P., Adaptive Control Algorithm Implemented into Programmable Logic Controller, 9th International Research Conference TMT, Antalya, Turkey, (2005), 26-30.
• [13] Gupta R., Lamba R. Padhee S., Thyristor Based Speed Control Techniques of DC Motor: A Comparative Analysis, International Journal of Scientific and Research Publications, 2(2012), No. 6, 698-710.
• [14] Junejo A., Bhutto Gh., Memon M., Lab Based Analysis of Speed Control of DC Motor by Using Different Semiconductor Power Converters, Open Access Journal, (2015), 1-11.
• [15] Livinti P., Livint Gh., The Synthesis of Automatic Controllers for Electrical Drive Systems with DC Motors, 9th International Research/Expert Conference TMT, Antalya, Turkey, (2005), 26-30.
• [16] Guo L., Design Projects in a Programmable Logic Controller(PLC) Course in Electrical Engineering Technology, The Technology Interface Journal, 10(2009), No.1, 78-84.
• [17] H. Z. Dahu, W. Tong, and Z. Keming, “Design on a DC Motor Speed Control” International Conference on Intelligent Computation Technology and Automation, Vol. 2, pp. 59-63.2010.
• [18] Ingole A., Kadawe P., Akote Sh., Speed Control of BLDC Motor Using PLC” International Journal of Advance Research in Science and Engineering,3 (2015), No. 4, 288-293.
• [19] Kumar M., Ramachandra B., Speed Control of Three Phase Induction Motor Using PLC under Open and Closed Loop Condition, Journal of Engineering Research and Application, 7(2017), No. 1,34-39.
• [20] Kaldate A., Kulkarni S., PLC Based PID Speed Control System, IOSR Journal of Engineering (IOSRJEN), 4(2014), No. 3, 55-60.
• [21] Dugga P., Meshram P., Deshbhratar R., Speed Control of DC Motor Application with Microcontroller Interface with Pc, International Journal of Research in Engineering and Technology, 5(2016), No. 11, 207-211.
• [22] Masood N., Design of PLC Based Speed Control of DC Motor Using PI Controller, International Journal of Scientific and Technical Advancements, 4(2018), No. 1, 5-8.
• [23] Shakir M., Mathew A., Programmable Logic Control Based Simultaneous Speed Control for Brushless DC Motor and Linear Induction Motor, IRNET Transactions on Electrical and Electronics Engineering, 2 (2015), No. 11, 51-56.
• [24] Anjum Sh., Srivastava V., Speed Control of Brushless DC Motor using PLC, International Journal for Scientific Research & Development, 3 (2015), No. 9, 583-586.
• [25] Rahama A., Mahmoud D., Control of Induction Motors by Using Programmable Logic Controllers (PLC), International Journal of Science and Research (IJSR), 5 (2016), No. 5, 1923-1926.

Uwagi

Opracowanie rekordu ze środków MEiN, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2022-2023).