Design of a system to analyse the performance of certified measuring instruments

• Autorzy: Wójcik Jacek , Piasecka Magdalena , Mięsikowska Marzena

Identyfikatory

DOI

10.24425/ijet.2024.149590

• Języki publikacji: EN

Abstrakty

EN

The aim of this article is to present modern methods for analysing the performance of certified measuring instruments. The design of a system for analysing the performance of certified measuring instruments is presented. In the first part, the traditional process of certification of measuring instruments and methods of market surveillance are described. The other part proposes an electronic solution to support the certification process by supervising the correct operation of measuring instruments.

Słowa kluczowe

EN

certification; digital methods; digitisation; certificate system; measuring instruments; analysis of measuring instrument operating conditions

• Wydawca: Polish Academy of Sciences, Committee of Electronics and Telecommunication
• Czasopismo: International Journal of Electronics and Telecommunications
• Rocznik: 2024
• Tom: Vol. 70, No. 3
• Strony: 637--642
• Opis fizyczny: Bibliogr. 16 poz., rys.

Twórcy

autor

Wójcik Jacek

• Central Office of Measures

autor

Piasecka Magdalena

• Kielce University of Technology

autor

Mięsikowska Marzena

• Kielce University of Technology

Bibliografia

• [1] W. T. Chyla, “Metrology in the modern global economy,,” Quarterly NAUKA, No. 4, pp. 139-170, 2014. (in Polish).
• [2] EUR-Lex Document, European Union law, C115, ISSN 1725-5228, vol. 51, 2008, nr 2008/C 115/01) (in Polish). https://eur-lex.europa.eu/legal-content/PL/TXT/PDF/?uri=OJ:C:2008:115:FULL
• [3] EUR-Lex Document 31985Y0604(01). “Council Resolution of 7 May 1985 on a new approach to technical harmonization and standards (85/C 136/01),” Official Journal C 136 , 04/06/1985 pp. 0001-0009.
• [4] Regulation of the Polish Minister of Development of June 2, 2016 on requirements for measuring instruments. Dz.U. 2016 poz. 815. https://isap.sejm.gov.pl/isap.nsf/download.xsp/WDU20160000815/O/D20160815.pdf
• [5] Central Office of Measures (GUM). https://www.gum.gov.pl/en
• [6] Glossary of selected terms and definitions used in metrology and hallmarkingPL/EN/PL. https://mbc.cyfrowemazowsze.pl/dlibra/doccontent?id=75052
• [7] T. Mustapää, P. Nikander, D. Hutzschenreuter, and R. Viitala, “Metrological challenges in collaborative sensing: Applicability of digital calibration certificates,” Sensors (Switzerland), vol. 20, no. 17, pp. 1-19, 2020. https://doi.org/10.3390/s20174730
• [8] S. Hackel, F. Härtig, J. Hornig, T. Wiedenhöfer, The Digital Calibration Certificate, PTB-Mitteilungen 127 (2017), Heft 4, 642 J. WÓJCIK, ET AL. https://doi.org/10.7795/310.20170499 https://oar.ptb.de/resources/show/10.7795/310.20170403
• [9] Calibration Technology Documentation. Documenting multi-function calibrator Model CEP6100,” pp. 1-8.
• [10] F. Thiel, M. Esche, F. Grasso Toro, A. Oppermann, J. Wetzlich, and D. Peters, “The European Metrology Cloud,” 2017. https://doi.org/10.1051/metrology/201709001
• [11] Physikalisch-Technische Bundesanstalt (PTB). https://www.ptb.de/cms/
• [12] F. Thiel, “Digital transformation of legal metrology - The European Metrology Cloud,” OIML Bull., vol. 59, no. 1, 2018.
• [13] Arduino Project.” https://docs.arduino.cc/hardware/nano-33-ble-sense-rev2/
• [14] X. Ge, X. Li, and Z. Zhang, “ADDP: Anomaly Detection Based on Denoising Pretraining,” Int. J. Electron. Telecommun., vol. 69, no. 4, pp. 719-726, 2023, https://doi.org/10.24425/ijet.2023.147693
• [15] Regulation of the Polish Minister of Development and Technology of May 5, 2022 amending the regulation on legal metrological control of measuring instruments. Dz.U. 2022 poz. 1179. https://isap.sejm.gov.pl/isap.nsf/download.xsp/WDU20220001179/O/D20221179.pdf
• [16] Document of Central Office of Measures (GUM), “Register of measuring instruments re-verified using the statistical method.” https://www.gum.gov.pl/pl/form/58,Rejestr-przyrzadow-pomiarowych-zalegalizowanych-ponownie-za-pomoca-metody-statys.html%0A

Uwagi

Opracowanie rekordu ze środków MNiSW, umowa nr POPUL/SP/0154/2024/02 w ramach programu "Społeczna odpowiedzialność nauki II" - moduł: Popularyzacja nauki (2025).