Accumulative roll bonding fabrication, tensile and corrosion characterization of Zn/Al multilayered composites

• Autorzy: Mosafajahanabad Nasim , Alizadeh Morteza , Salahinejad Erfan

Identyfikatory

DOI

10.1007/s43452-022-00521-6

• Języki publikacji: EN

Abstrakty

EN

In the present work, accumulative roll bonding (ARB) processing and characteristics of Zn/6 wt% Al multilayered composite sheets were investigated for the first time. The structure of the fabricated composites was evaluated by X-ray diffraction (XRD) and scanning electron microscopy (SEM). Tensile testing and fractography were used to assess the strength and elongation of the composites. The corrosion behavior of the fabricated samples was also investigated by potentiodynamic polarization and electrochemical impedance spectroscopic tests in the 3.5 wt% NaCl solution. Despite the evolution of atomic intermixing at the interface of the layers and grain refinement, the tensile strength and elongation of the composites were reduced by increasing ARB cycles due to the domination of plastic instability introduced by the ARB process. In addition, an initial increase until the third ARB cycle followed by decrease in the corrosion tendency of the composites was found by progression of the ARB process, which was attributed to a compromise between the levels of structural defects and homogeneity. It is eventually concluded that after optimizing the mechanical and corrosion behaviors as a function of the number of ARB cycles, ARB-processed Zn/Al multilayered composites can be further considered in industrial applications.

Słowa kluczowe

EN

nanostructured composite; ARB process; mechanical tensile behaviors; electrochemical corrosion resistance

PL

kompozyt nanostrukturalny; właściwości mechaniczne; odporność na korozję

• Wydawca: Springer ; Wrocław University of Science and Technology
• Czasopismo: Archives of Civil and Mechanical Engineering
• Rocznik: 2022
• Tom: Vol. 22, no. 4
• Strony: art. no. e191, 2022
• Opis fizyczny: Bibliogr. 24 poz., rys., wykr.

Twórcy

autor

Mosafajahanabad Nasim

• Department of Materials Science and Engineering, Shiraz University of Technology, Modarres Blvd., Shiraz 71557-13876, Iran

autor

Alizadeh Morteza

• Department of Materials Science and Engineering, Shiraz University of Technology, Modarres Blvd., Shiraz 71557-13876, Iran

autor

Salahinejad Erfan

• Faculty of Materials Science and Engineering, K. N. Toosi University of Technology, Tehran, Iran

Bibliografia

• [1] Sahoo SK, Sabat RK, Panda S, Mishra SC, Suwas S. Texture and microstructure evolution of pure zinc during rolling at liquid nitrogen temperature and subsequent annealing. Mater Charact. 2017;123:218–26.
• [2] Tomov I, Cvetkova C, Velinov V, Riesenkampf A, Pawlik B. Factors influencing the preferential orientations in zinc coatings electrode: posited from chloride baths. J Appl Electrochem. 1989;19:377–82.
• [3] Huang H, Liu H, Wang LS, Li YH, Agbedor SO, Bai J, Xue F, Jiang JH. A high-strength and biodegradable Zn–Mg alloy with refined ternary eutectic structure processed by ECAP. Acta Metall Sin-Engl. 2020;33:1191–200.
• [4] Jaglinski T, Lakes RS. Zn–Al-based metal–matrix composites with high stiffness and high viscoelastic damping. J Compos Mater. 2011;46:755–63.
• [5] Gokhale A, Sarvesha R, Prasad R, Sudhanshu SS, Jain J. A novel approach to refine surface grains in pure zinc using indentation scratch. Mater Lett. 2019;247:151–4.
• [6] Bobic I, Jovanovic MT, Ilic N. Microstructure and strength of ZA-27-based composites reinforced with Al 2 O 3 particles. Mater Lett. 2003;57:1683–8.
• [7] Lee HS, Kumar singh J, Mohamed Ismail A, Bhattacharya C, Asi-ful seikh H, Alharthi N, Rizwan Hussain R. Corrosion mechanism and kinetics of Al-Zn coating deposited by arc thermal spraying process in saline solution at prolong exposure periods. Sci Rep. 2019;9:3399.
• [8] Lu X, Wang S, Xiong T, Wen D, Wang G, Du H. Anticorrosion properties of Zn–Al composite coating prepared by cold spraying. Coatings. 2019;9:210–9.
• [9] Krystýnová M, Doležal P, Fintová S, Březina M, Zapletal J, Wasserbauer J. Preparation and characterization of zinc materials prepared by powder metallurgy. Metals. 2017;7:396.
• [10] Alizadeh M, Dashtestaninejad MK. Development of Cu-matrix, Al/Mn-reinforced, multilayered composites by accumulative roll bonding (ARB). J Alloys Compd. 2018;732:674–82.
• [11] Kalantarrashidi N, Alizadeh M. Structure, wear and corrosion characterizations of Al/20wt% Zn multilayered composites fabricated by cross-accumulative roll bonding. J Manuf Process. 2020;56:1050–8.
• [12] Wang L, Zhang J, Zeng Z, Lin Y, Hu L, Xue Q. Fabrication of a nanocrystalline NiCo/CoO functionally graded layer with excellent electrochemical corrosion and tribological performance. Nanotechnology. 2006;17:4614–23.
• [13] Dehgahi S, Amini R, Alizadeh M. Microstructure and corrosion resistance of Ni-Al 2 O 3 -SiC nanocomposite coatings produced by electrodeposition technique. J Alloys Compd. 2017;692:622–8.
• [14] Williamson GK, Hall WH. X-ray line broadening from filed aluminium and wolfram. Acta Metall. 1953;1:22–31.
• [15] Avazzadeh M, Alizadeh M, Tayyebi M. Structural, mechanical and corrosion evaluations of Cu/Zn/Al multilayered composites subjected to CARB process. J Alloys Compd. 2021;867: 158973.
• [16] Mahdavian M, Ghalandari L, Reihanian M. Accumulative roll bonding of multilayered Cu/Zn/Al: an evaluation of microstructure and mechanical properties. Mater Sci Eng A. 2013;579:99–107.
• [17] Alizadeh M. Effects of temperature and B 4 C content on the bonding properties of roll-bonded aluminum strips. J Mater Sci. 2012;47:4689–95.
• [18] Sauvage X, Dinda GP, Wilde G. Non-equilibrium intermixing and phase transformation in severely deformed Al/Ni multilayers. Scripta Mater. 2007;56:181–4.
• [19] Nasiri Dehsorkhi R, Qods F, Tajally M. Investigation on microstructure and mechanical properties of Al–Zn composite during accumulative roll bonding (ARB) process. Mater Sci Eng A. 2011;530:63–72.
• [20] Alaneme KK. Corrosion behaviour of heat-treated Al-6063/SiCp composites immersed in 5 wt% NaCl solution. Leonardo J Sci. 2011;18:55–64.
• [21] Bobic B, Mitrovic S, Babic M, Bobic I. Corrosion of aluminium and zinc-aluminium alloys based metal-matrix composites. Tribol Ind. 2009;31:44–53.
• [22] Naseri M, Hassani A, Tajally M. Fabrication and characterization of hybrid composite strips with homogeneously dispersed ceramic particles by severe plastic deformation. Ceram Int. 2015;41:3952–60.
• [23] Vakili M, Borhani E, Ashrafi A. Corrosion behavior of nano-/ultrafine-grained Al-0.2 wt% Sc alloy produced by accumulative roll bonding (ARB). J Mater Eng Perform. 2018;27:4253–60.
• [24] Dan S, Ai-bin M, Jing-hua J, Pin-hua L, Dong-hui Y. Corrosion behavior of ultra-fine grained industrial pure Al fabricated by ECAP. Trans Nonferrous Met Soc China. 2009;19:1065–70.

Uwagi

PL

Opracowanie rekordu ze środków MEiN, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2022-2023)