Reclamation of mixtures of spent sands of inorganic and organic type

• Autorzy: Skrzyński M. , Dańko R. , Kamińska J.
• Języki publikacji: EN

Abstrakty

EN

The results of investigations of the reclamation of spent moulding and core sands, originated from one of the Polish foundry plants, are presented in the paper. Four mixtures consisting of two types of spent sands (spent moulding sand and spent core sand) were subjected to the regeneration process. Each tested mixture consisted of an inorganic type spent moulding sand and of an organic type spent core sand. Proportions of mutual fractions of spent moulding and core sands in mixtures was 70%-30% and was representative for the waste sands from the foundry, from which these sands originated.

Słowa kluczowe

EN

reclamation; foundry sand; moulding sand; environmental protection

PL

regeneracja; masa formierska; ochrona środowiska

• Wydawca: Komisja Odlewnictwa Polskiej Akademii Nauk Oddział w Katowicach
• Czasopismo: Archives of Foundry Engineering
• Rocznik: 2013
• Tom: Vol. 13, iss. 4
• Strony: 93--96
• Opis fizyczny: Bibliogr. 6 poz., rys., tab., wykr.

Twórcy

autor

Skrzyński M.

• AGH - University of Science and Technology, Faculty of Foundry Engineering, Reymonta 23 Str., 30-059 Kraków, Poland

autor

Dańko R.

• AGH - University of Science and Technology, Faculty of Foundry Engineering, Reymonta 23 Str., 30-059 Kraków, Poland

autor

Kamińska J.

• AGH - University of Science and Technology, Faculty of Foundry Engineering, Reymonta 23 Str., 30-059 Kraków, Poland

Bibliografia

• [1] Dańko, R., Dańko, J., Holtzer, M. & Skrzyński, M. (2013). Reclamation of spent moulding sand in the vibratory reclaimer REGMAS 1,5. Przegląd Odlewnictwa. 63(1,2), 36-40.
• [2] Dańko, R. (2011). Innovative developments in sand reclamation technologies. Metalurgija. 50(2), 93-96.
• [3] Dańko, J., Dańko, R., Łucarz, M. (2007). Processes and devices for reclamation of used moulding sands. Kraków: Wydawnictwo Naukowe „Akapit”.
• [4] Dańko R. (2012). Strength model of self-setting moulding sands with synthetic resins in an aspect of the integrated matrix recycling process. Monografia, Wydawnictwo Archives of Foundry Engineering.
• [5] Holtzer, M., Dańko, R. & Skrzyński, M. (2012). Investigations of the effectiveness of the classification based on the laser method of the grain size estimation. Archives of Foundry Engineering. 12(1), 63-68.
• [6] Jezierski, J., Janerka, K. (2011). Waste Utilization in Foundries and Metallurgical Plants-Selected Aspects, 20th Anniversary International Conference on Metallurgy and Materials METAL, 18. - 20. 5. 2011, Brno, Czech Republic.