Powiadomienia systemowe
- Sesja wygasła!
Tytuł artykułu
Treść / Zawartość
Pełne teksty:
Identyfikatory
Warianty tytułu
Języki publikacji
Abstrakty
An active inerter-based suspension with acceleration feedback control is proposed in this paper, the time delay generated in the controllers and actuators is considered, which constitutes the time-delayed active inerter-based (TDA-IB) suspension. The dynamic equation of the TDA-IB suspension is established and is a neutral type of delay differential equation (NDDE) in which the time delay exists in the highestorder derivative. The stability analysis is conducted by calculating the number of unstable characteristic roots based on the definite integral stability method, the stable and unstable regions are determined. The effect of time delay and feedback gain on the dynamic performance of the TDA-IB suspension under harmonic, random, and shock excitations is studied in detail and compared with the parallel-connected inerterbased (PC-IB) and traditional suspensions. The results show that the TDA-IB suspension is asymptotically stable for smaller feedback gain and time delay, through increasing the feedback gain, the stable regions shrink, and a smaller time delay could cause the system to become unstable. Furthermore, the time delay could regulate the resonance peak around the unsprung mass natural frequency and generate multiple high-frequency resonance peaks. If the time delay is chosen appropriately and falls into the stable range, the TDA-IB suspension could improve the dynamic performance for the suspension stroke and dynamic tire load while having a deterioration for the vehicle body acceleration compared with the PC-IB and traditional suspensions.
Rocznik
Tom
Strony
art. no. e140687
Opis fizyczny
Bibliogr. 33 poz., rys., tab.
Twórcy
autor
- Automotive Engineering Research Institute, Jiangsu University, Zhenjiang 212013, China
- Vehicle Measurement, Control and Safety Key Laboratory of Sichuan Province, Xihua University, Chengdu 610039, China
- Provincial Engineering Research Center for New Energy Vehicle Intelligent Control and Simulation Test Technology of Sichuan, Xihua University, Chengdu 610039, China
autor
- Automotive Engineering Research Institute, Jiangsu University, Zhenjiang 212013, China
autor
- Automotive Engineering Research Institute, Jiangsu University, Zhenjiang 212013, China
autor
- School of Mechanics and Engineering Science, Shanghai University, Shanghai 200444, China
autor
- School of Mechanics and Engineering Science, Shanghai University, Shanghai 200444, China
Bibliografia
- [1] R. Rajamani, Vehicle Dynamics and Control. New York, USA: Springer, 2012, doi: 10.1007/978-1-4614-1433-9.
- [2] P. Baranowski and J. Malachowski, “Numerical study of selected military vehicle chassis subjected to blast loading in terms of tire strength improving,” Bull. Pol. Acad. Sci. Tech. Sci., vol. 63, no. 4, pp. 867–878, 2015, doi: 10.1515/bpasts-2015-0099.
- [3] Y. Li, D.C. He, and Q.R. Si, “Theoretical and experimental analysis on the interaction properties between tracks and sediments considering sand content for unmanned underwater tracked bulldozer,” Bull. Pol. Acad. Sci. Tech. Sci., vol. 69, no. 1, e136036, 2021, doi: 10.24425/bpasts.2021.136036.
- [4] M.C. Smith, “Synthesis of mechanical networks: the inerter,” IEEE Trans. Autom. Control., vol. 47, no. 10, pp. 1648–1662, 2002, doi: 10.1109/TAC.2002.803532.
- [5] R.C.Wang, X.P. Meng, D.H. Shi, X.L. Zhang, Y.X. Chen, and L. Chen, “Design and test of vehicle suspension system with inerters,” Proc. Inst. Mech. Eng., Part C: J. Mech. Eng. Sci., vol. 228, no. 15, pp. 2684–2689, 2014, doi: 10.1177/0954406214521793.
- [6] S.Y. Zhang et al., “Ride comfort enhancement for passenger vehicles using the structure-immittance approach,” Veh. Syst. Dyn., 2019, doi: 10.1080/00423114.2019.1694158.
- [7] X.F. Liu, J.Z. Jiang, A. Harrison, and X.X. Na, “Truck suspension incorporating inerters to minimise road damage,” Proc. Inst. Mech. Eng., Part D: J. Automob. Eng., vol. 234, no. 10-11, pp. 2693–2705, 2020, doi: 10.1177/ 0954407020905149.
- [8] J.L. Yao, G.W. Lv, M. Qv, Z.H. Li, S. Ren, and S. Taheri, “Lateral stability control based on the roll moment distribution using a semiactive suspension,” Proc. Inst. Mech. Eng., Part D: J. Automob. Eng., vol. 231, no. 12, pp. 1627–1639, 2017, doi: 10.1177/0954407016681386.
- [9] L. Yang, R.C.Wang, X.P. Meng, Z.Y. Sun,W. Liu, and Y.Wang, “Performance analysis of a new hydropneumatic inerter-based suspension system with semi-active control effect,” Proc. Inst. Mech. Eng., Part D: J. Automob. Eng., vol. 234, no. 7, pp. 1883–1896, 2020, doi: 10.1177/0954407019894189.
- [10] M. Lazarek, P. Brzeski, and P. Perlikowski, “Design and identification of parameters of tuned mass damper with inerter which enables changes of inertance,” Mech. Mach. Theory, vol. 119, pp. 161–173, 2018, doi: 10.1016/j.mechmachtheory.2017.09.004.
- [11] M. Lazarek, P. Brzeski, and P. Perlikowski, “Design and modeling of the CVT for adjustable inerter,” J. Franklin Inst., vol. 356, pp. 7611–7625, 2019, doi: 10.1016/j.jfranklin.2018.11.011.
- [12] R. Faraj, L. Jankowski, C. Graczykowski, and J. Holnicki-Szulc, “Can the inerter be a successful shock-absorber? The case of a ball-screw inerter with a variable thread lead,” J. Franklin Inst., vol. 356, pp. 7855–7872, 2019, doi: 10.1016/j.jfranklin.2019.04.012.
- [13] M.Z.Q. Chen, Y.L. Hu, C.Y. Li, and G.R. Chen, “Application of semi-active inerter in semi-active suspensions via force tracking,” J. Vib. Acoust., vol. 138, no. 4, p. 041014, 2016, doi: 10.1115/ 1.4033357.
- [14] X.L. Zhang, T. Zhang, J.M. Nie, and L. Chen, “A semiactive skyhook-inertance control strategy based on continuously adjustable inerter,” Shock Vib., vol. 2018, p. 6828621, 2018, doi: 10.1155/2018/6828621.
- [15] X.J. Zhang, M. Ahmadian, and K.H. Guo, “On the benefits of semi-active suspensions with inerters,” Shock Vib., vol.19, no. 3, pp. 257–272, 2012, doi: 10.3233/SAV-2011-0628.
- [16] Y.L. Hu, M.Z.Q. Chen, and Y. Sun, “Comfort-oriented vehicle suspension design with skyhook inerter configuration,” J. Sound Vib.., vol. 405, pp. 34–47, 2017, doi: 10.1016/j.jsv.2017.05.036.
- [17] Y. Wang, H. Ding, and L.Q. Chen, “Averaging analysis on a semi-active inerter-based suspension system with relativeacceleration-relative-velocity control,” J. Vib. Control, vol. 26, no. 13–14, pp. 1199–1215, 2020, doi: 10.1177/1077546319891612.
- [18] W.C. Sun, H.H. Pan, Y.F. Zhang, and H. Gao, “Multi-objective control for uncertain nonlinear active suspension systems,” Mechatronics, vol. 24, no. 4, pp. 318–327, 2014, doi: 10.1016/j.mechatronics.2013.09.009.
- [19] Y.B. Huang, J. Na, X.Wu, X.Q. Liu, and Y. Guo, “Adaptive control of nonlinear uncertain active suspension systems with prescribed performance,” ISA Trans., vol. 54, pp. 145–155, 2015, doi: 10.1016/j.isatra.2014.05.025.
- [20] H.N. He, Y. Li, J.Z. Jiang, S. Burrow, S.A. Neild and A. Conn, “Using an inerter to enhance an active-passive-combined vehicle suspension system,” Int. J. Mech. Sci., vol. 204, p. 106535, 2021, doi: 10.1016/j.ijmecsci.2021.106535.
- [21] I.G. Jin and G. Orosz, “Dynamics of connected vehicle systems with delayed acceleration feedback,” Transport Res. C-Emer., vol. 46, pp. 46–64, 2014, doi: 10.1016/j.trc.2014.04.014.
- [22] Q. Xu, G. Stepan and Z.H.Wang, “Balancing a wheeled inverted pendulum with a single accelerometer in the presence of time delay”, J. Vib. Control, vol. 23, no. 4, pp. 604–614, 2017, doi: 10.1177/1077546315583400.
- [23] Z.N. Masoud and A.H. Nayfeh, “Sway reduction on container cranes using delayed feedback controller,” Nonlinear Dyn., vol. 34, pp. 347–358, 2003, doi: 10.1023/B:NODY.0000013512.43841.55.
- [24] Q. Xu and Z.H. Wang, “Exact stability test of neutral delay differential equations via a rough estimation of the testing integral,” Int. J. Dyn. Control, vol. 2, no. 2, pp. 154–163, 2014, doi: 10.1007/s40435-013-0044-7.
- [25] Y. Wang, S.M. Li, C. Cheng, and Y.Q. Su, “Adaptive control of a vehicle-seat-human coupled model using quasi-zero-stiffness vibration isolator as seat suspension,” J. Mech. Sci. Technol., vol. 32, no. 7, pp. 2973–2985, 2018, doi: 10.1007/s12206-018-0601-2.
- [26] D. Ivanescu, S.I. Niculescu, L. Dugard, J.M. Dion, and E.I. Verriest, “On delay-dependent stability for linear neutral systems,” Automatica, vol. 39, no. 2, pp. 255–261, 2003, doi: 10.1016/S0005-1098(02)00227-3.
- [27] G.I.K. Taffo, M.S. Siewe, and C. Tchawoua, “Stability switches and bifurcation in a two-degrees-of-freedom nonlinear quartercar with small time-delayed feedback control,” Chaos Solitons Fractals, vol. 87, pp. 226–239, 2016, doi: 10.1016/j.chaos.2016.04.012.
- [28] S. Rifat and N. Olgac, “Complete stability analysis of neutraltype first order two-time-delay systems with cross-talking delays,” SIAM J. Control Optim., vol. 45, no. 3, pp. 957–971, 2006, doi: 10.1137/050633810.
- [29] T. Insperger, G. Stepan, and T. Janos, “Delayed feedback of sampled higher derivatives,” Philos. Trans. R. Soc. London, Ser. A, vol. 368, no. 1911, pp. 469–482, 2010, doi: 10.1098/rsta.2009.0246.
- [30] T. Vyhlidal, N. Olgac, and V. Kucera, “Delayed resonator with acceleration feedback-Complete stability analysis by spectral methods and vibration absorber design,” J. Sound Vib., vol. 333, no. 25, pp. 6781–6795, 2014, doi: 10.1016/j.jsv.2014.08.002.
- [31] Q. Xu, G. Stepan, and Z.H. Wang, “Delay-dependent stability analysis of time-delay systems by using delay-independent evaluation,” Automatica, vol. 70, pp. 153–157, 2016, doi: 10.1016/j.automatica.2016.03.028.
- [32] G. Verros, S. Natsiavas, and C. Papadimitriou, “Design optimization of quarter-car models with passive and semi-active suspensions under random road excitation,” J. Vib. Control, vol. 11, no. 5, pp. 581–606, 2005, doi: 10.1177/1077546305052315.
- [33] M. Silveira, B.R. Pontes and J.M. Balthazar, “Use of nonlinear asymmetrical shock absorber to improve comfort on passenger vehicles,” J. Sound Vib., vol. 333, no. 7, pp. 2114–2129, 2014, doi: 10.1016/j.jsv.2013.12.001.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-1fff0535-1cdc-4ed3-b92c-9510575c8cce