Research on the durability of adhesive composites

• Autorzy: Rośkowicz M. , Smal T.
• Języki publikacji: EN

Abstrakty

EN

The paper presents research on the durability of adhesive composites, which may be used for the repair of technical objects. Durability of adhesive composites is understood in this paper as a material ability to transfer long lasting loads. Since that kind of information is not provided by manufacturers, the long-term strength and fatigue-life of selected adhesive composites are determined; especially with regard to their use in expedient (temporary) repairs of weapon systems. The results obtained show that safe values of the maximum long-term and fatigue loads of the adhesive composites investigated should be a half of the short-term strength obtained in a static tests.

Słowa kluczowe

EN

durability of materials; adhesive composites; long-term strength; fatigue life

PL

obliczenia wytrzymałościowe; kompozyty klejowe; wytrzymałość długotrwała; trwałość zmęczeniowa

• Wydawca: Instytut Podstawowych Problemów Techniki PAN
• Czasopismo: Engineering Transactions
• Rocznik: 2013
• Tom: Vol. 61, iss. 1
• Strony: 47--64
• Opis fizyczny: Bibliogr. 26 poz., rys., tab., wykr.

Twórcy

autor

Rośkowicz M.

• Military University of Technology Institute of Air Technology Gen. S. Kaliskiego 2, 00-908 Warszawa, Poland

autor

Smal T.

• The General Tadeusz Kosciuszko Military Academy of Land Forces Institute of Command Czajkowskiego 109, 51-150 Wrocław, Poland

Bibliografia

• 1. Baker A.A., Bonded composite repair of fatigue-cracked primary aircraft structure, Comp. Struct., 47, 431–443, ISSN 0263-8223, 1999.
• 2. Cypko E., Kowalczyk S., Raczkowski D., Repair of military equipment by application of quick-setting adhesives [in Polish], General Staff of The Polish Armed Forces, Warsaw, 1998.
• 3. Clark G., Failures in military aircraft, Engineering Failure Analysis, 12, 755–771, ISSN 1350-6307, 2005.
• 4. Information Materials of Ciba-Geigy, Araldit, Structural Adhesives Supplied by CIBAGEIGY, 1988.
• 5. Godzimirski J., Rośkowicz M., Tkaczuk S., Smal T., Epoxy adhesives. An application in repairs of machines and equipment [in Polish], WNT, Warsaw, ISBN 978-83-204-3605-1, 2010.
• 6. Godzimirski J., Smal T., Possibilities of adhesive joints executing with use of composite adhesives [in Polish], Technology and Assembly Automation, 3, 29, 18–23, ISSN 1230- 7661, 2000.
• 7. Godzimirski J., Komorek A., Smal T., Research of strength features of adhesive composites [in Polish], Maintenance Problems of Machines, 1, 64, 157–165, ISSN 1232-9312, 2007.
• 8. Zacharski J., Probability and mathematical statistics in tasks [in Polish], The Military University of Technology, Warsaw, 1974.
• 9. Klug J.C., Maley S., Sun C.T., Characterization of fatigue behavior of bonded composite repairs, Journal of Aircraft, 36, 6, 1016–22, ISSN 0021-8669, 1999.
• 10. Ferry J.D., Viscoelastic Properties of Polymers, John Wiley and Sons, New York [polish translation WNT 1965], 1961.
• 11. Rees K., Shames J., Horn R., Esswein L., Current Procedures for Assessment of BDR in Helicopters, NATO Research and Technology Organisation, RTO-EN-AVT-156, 7/1-27, ISBN 978-92-837-0119-4, 2010.
• 12. Updahya K.S., Srinivasan N.K.A., A simulation model for availability under battlefield conditions, Journal of Simulation, 74, 6, 332–339, ISSN 1747-7778, 2000.
• 13. Rośkowicz M., Long-lasting strength of adhesive bonds [in Polish], Doctor’s Thesis, Military Academy of Technology, Warsaw, 2004.
• 14. Rośkowicz M., Smal T., Modification influence of adhesive layer on static long-lasting life of adhesive joint [in Polish], Technology and Assembly Automation, 2, 52, 51–54, ISSN 1230-7661, 2006.
• 15. Rośkowicz M., Smal T., Determination of creep curves and long-term strength of adhesive joints [in Polish], Technology and Assembly Automation, 2, 3 56, 57, 120–123, ISSN 1230-7661, 2007.
• 16. Rośkowicz M., Smal T., Durability of the Belzona 1111 and the Belzona 1812 Adhesive Composites, Polymers, 6, 471–477, ISSN 0032-2725, 2011.
• 17. Davis M.J., The role of materials and processes in defective bonded structural repairs, Proceedings of 41st, International Conference SAMPE, Anaheim, 936–950, 1996.
• 18. Meshgina P., Choib K.K., Reda Taha M.M., Experimental and analytical investigations of creep of epoxy adhesive at the concrete – FRP interfaces, International Journal of Adhesion and Adhesives, 29, ISSN 0143-7496, 2009.
• 19. Chester R.J., Walker K.F., Chalkey P.D., Adhesively bonded repairs to primary aircraft structure, Int. J. of Adhesion and Adhesives, 19, ISSN 0143-7496, 1999.
• 20. Kowalczyk S., Smal T., Changes in the properties of composite materials and their relation to the technology of regeneration and repair of machines and equipment [in Polish], Maintenance Problems, 3, 26, 181–189, ISSN 1232-9312, 1997.
• 21. STANAG 2418, Procedures for expedient repair, including battle damage repair, 2009.
• 22. Smal T., Battle damage repair of military equipment with use of adhesive composites [in Polish], [in:] The problems of Armament and Military Equipment Service [in Polish], The Gen. T. Kosciuszko Military Academy of Land Forces, Wroclaw, 205–210, ISBN 13/978- 83-87384-03-6, 2006.
• 23. Smal T., Battle damage repair systems in selected NATO armies, [in:] Deterioration, Dependability, Diagnostics, University of Defense, Brno, 33–40, ISBN 978-80-260-0633-6, 2011.
• 24. Smal T., Rośkowicz M., The battlefield maintenance of aircraft equipment [in Polish], Quartelly Bellona, 4, 659, 170–175, ISSN 1897-7065, 2009.
• 25. Smal T., Furch J., Expedient Repairs – Analysis of Possibilities and Needs, Advanced in Military Technology, 4, ISSN 1802-2308, 2011.
• 26. Marioli-Riga Z.P., Tsamasphyros G.J., Kanderakis G.N., Design of emergency aircraft repairs using composite patches, Mechanics of Composite Materials and Structures, 8, 199–204, ISSN 1075-9417, 2001.