Dynamic cloth fell movement. Part II: New measuring device

• Autorzy: Azzam H. A. , Büsgen A.
• Języki publikacji: EN

Abstrakty

EN

Textile Technology Department, University of Applied Science, Mönchengladbach, Germany A new flexible cloth fell movement measuring device, hereafter referred to as the 'needle-mechanical device', has been developed to facilitate the use, for the first time, of a measuring position just 2 millimetres from the cloth fell. In addition, the experimental set-up was built in a combination between the needle-mechanical device and the Weave Master to record the dynamic cloth fell's movement cycles on-loom. The results of these measurements were analysed and discussed in the light of the theory developed in part I.

Słowa kluczowe

EN

weaving technology; cloth fell movement; warp tension

PL

technologia tkania; napięcie osnowy

• Wydawca: Lodz University of Technology, Faculty of Material Technologies and Textile Design
• Czasopismo: Autex Research Journal
• Rocznik: 2006
• Tom: Vol. 6, no. 1
• Strony: 23--29
• Opis fizyczny: Bibliogr. 2 poz.

Twórcy

autor

Azzam H. A.

• Lecturer of Textile Engineering, Textile Technology Department, Industrial Education College, Beni-Suef, Egypt

autor

Büsgen A.

• Textile Technology Department, University of Applied Science, Mönchengladbach, Germany

Bibliografia

• 1. H. A. Azzam, Master Thesis, July 1999, Textile Technology Department, University Of Applied Science, Mönchengladbach, Germany.
• 2. H. A. Azzam and A. Busgen, "Dynamic Cloth Fell Movement, Part I: Critical Review", AUTEX Research Journal, 2006 (to be published).