ZnO coatings ON Ti6Al4V substrate: structural and antibacterial properties in literature review and research

• Autorzy: Sukhodub Leonid , Sukhodub Luidmila , Kumeda Mariia , Panda Anton , Baron Petr

Identyfikatory

DOI

10.2478/mspe-2020-0045

• Języki publikacji: EN

Abstrakty

EN

ZnO, ZnO/Alginate coatings were obtained on the pre-anodized Ti6Al4V substrates by the thermal substrate deposition method (TSD). In the frame of this work, the TSD method was at first applied for obtaining ZnO coating from aqueous alginate-containing and alginate-free solutions on a metal surface. XRD, SEM analyses show that the biopolymer has a significant influence on the formation of the coating, their morphology, texture, structure of ZnO nanoparticles. The average rate of ZnO deposition from alginate containing solution is 30 μm/min, while from alginate-free solutions – 6 μm/min. In the presence of alginate, spherical particles with flower-shaped inclusions are formed, while from the polymer-free solution, single crystals in the form of tetrahedral were obtained. Zone of inhibition test against Gram-positive S. aureus ATCC 25923 and Gram-negative E. coli ATCC 25922 proves the antibacterial activity of the ZnO/Alg coatings.

Słowa kluczowe

EN

thermal substrate deposition; zinc oxide; alginate; coating; antimicrobial activity

• Wydawca: STE GROUP
• Czasopismo: Management Systems in Production Engineering
• Rocznik: 2020
• Tom: nr 4 (28)
• Strony: 318--324
• Opis fizyczny: Bibliogr. 61 poz., rys., tab.

Twórcy

autor

Sukhodub Leonid

• Sumy State University, Medical Institute, 2, Rymskogo-Korsakova st., 40007 Sumy, Ukraine

autor

Sukhodub Luidmila

• Sumy State University, Medical Institute, 2, Rymskogo-Korsakova st., 40007 Sumy, Ukraine

autor

Kumeda Mariia

• Sumy State University, Medical Institute, 2, Rymskogo-Korsakova st., 40007 Sumy, Ukraine

autor

Panda Anton

• Technical University of Kosice Faculty of Manufacturing Technologies Sturova 31, 08001 Presov, Slovak Republic

autor

Baron Petr

• Technical University of Kosice Faculty of Manufacturing Technologies Sturova 31, 08001 Presov, Slovak Republic

Bibliografia

• [1] S.K. Aryaa, S. Sahab, J.E. Ramirez-Vickc, V. Guptab, Shekhar Bhansalid and S.P. Singh. Recent advances in ZnO nanostructures and thin films for biosensor applications:Review. Analytica Chimica Acta vol. 737, pp. 1-21, 2012.
• [2] D. Bian, Y. Guo and Y. Zhao Influence of Zinc Oxide on Corrosion Resistance of Alumina Based Chemically Bonded Ceramic Coatings. Russian Journal of Applied Chemistry, Vol. 89, No. 12, pp. 2091-2094, 2016.
• [3] P. Bhattacharjee, H. Begam, A. Chanda and S.K. Nandi. "Animal trial on zinc doped hydroxyapatite: A case study", Journal of Asian Ceramic Societies, vol. 2(1), pp. 44-51, 2014.
• [4] M. Chozhanathmisra, S. Ramya, L. Kavitha and D. Gopi. "Development of zinchallosyte NT/mineral substituted hydroxyapatite bilayer coatings on Ti alloy for orthopedic applications", Colloids Surf., vol. 511, pp. 357-365, 2016.
• [5] R.T. Candidato Jr., R. Sergic, J. Jouina, O. Nogueraa, L. Pawłowskia. Advanced microstructural study of solution precursor plasma sprayed Zn doped hydroxyapatite coatings. Journal of the European Ceramic Society, vol. 38, pp. 2134-2144, 2018.
• [6] L.F. Deravi, J.D. Swartz and D.W. Wright. "The biomimetic synthesis of metal oxide nanomaterials", Wiley, pp. 1-10, 2010.
• [7] Q. Ding, X. Zhang, Y. Huang, Y. Yan, X. Pang. In vitro cytocompatibility and corrosion resistance of zinc-doped hydroxyapatite coatings on a titanium substrate. J Mater Sci, vol. 50, pp. 189-202, 2015
• [8] M. Epple, "Biomaterials and biomineralization", Wind, p.165, 2007.
• [9] M. Farahmandjou and S. Jurablu. "Co-precipitation synthesis of zinc oxide (ZnO) nanoparticles by zinc nitrate precursor", Int. J. Bio. Inor. Hybr. Nanomater, vol. 3, pp. 179-184, 2014.
• [10] Z.Z. Feng, X.M. Liu, L. Tan, Z.D. Cui, X.J. Yang, Z.Y. Li, Y F. Zheng, K.W.K. Yeung and S.L. Wu. "Electrophoretic Deposited Stable Chitosan@MoS2 Coating with Rapid In Situ Bacteria-Killing Ability under Dual-Light Irradiation", Small, vol. 14 (21), pp. 1704347, 2018.
• [11] M.S. Gezaz, S.M. Aref, M. Khatamian, Investigation of structural properties of hydroxyapatite/ zinc oxide nanocomposites; an alternative candidate for replacement in recovery of bones in load-tolerating areas, Mat. Chem. and Phy. Vol. 226, pp. 169-176, 2019.
• [12] C. Jin, X. Liu, L. Tan, Z. Cui, X. Yang, Y. Zheng, K.W.K. Yeung, P.K Chu and S. Wu. "Ag/AgBr-loaded mesoporous silica for rapid sterilization and promotion of wound healing", Biomaterials Science, vol. 6 (7), pp. 1735-1744, 2018.
• [13] K. Kuroda, R. Ichino, M. Okido and O. Takai. "Hydroxyapatite coating on titanium by thermal substrate method in aqueous solution", Journal of Biomedical Materials Research, vol. 59 (2), pp. 390-397, 2001.
• [14] K. Kuroda. "Hydroxyapatite coating of titanium implants using hydroprocessing and evaluation of their osteoconductivity", Bioinorganic Chemistry and Applications, pp. 730693, 2012.
• [15] J. Karbowniczek, L. Cordero-Arias, S. Virtanen, S.K. Misra, E. Valsami-Jones, L. Tuchscherr, B. Rutkowski, K. Gorecki, P. Bala, A. Czyrska-Filemonowicz and A.R. Boccaccini. "Elecrophoretic deposition of organic/inorganic composite coatings containing ZNo nanoparticles exhibiting antibacterial properties", Mater. Sci. Eng., C vol. 77, pp. 780-789, 2017.
• [16] J. Lva, S. Zhanga, S. Wanga, L. Luoa, H. Huanga and J. Zhangba State Chemical transformation of zinc oxide nanoparticles as a result ofinteraction with hydroxyapatite. Colloids and Surfaces A: Physicochem. Eng. Aspects, vol. 461, pp. 126-132, 2014.
• [17] Y. Li, X. Liu, L. Tan, Z. Cui, X. Yang, Y. Zheng, K. Wai, K. Yeung, P.K. Chu and S. Wu. "Rapid Sterilization and Accelerated Wound Healing Using Zn2+ and Graphene Oxide Modified g-C3N4 under Dual Light Irradiation", Advanced Functional Materials, vol. 28 (30), pp. 1800299, 2018.
• [18] M. Moldovan, D. Prodan, V. Popescu, C. Prejmerean, C. Saroși, M. Saplonţai, S. Țălu and E. Vasile. "Structural and morphological properties of HA-ZnO powders prepared for biomaterials", Open Chem, vol. 13, pp. 725-733, 2015.
• [19] E. Peter Etape, J. Foba-Tendo, L.J. Ngolui, B.V. Namondo, F.C. Yollande and M.B. Nguefack Nguimezong. Structural Characterization and Magnetic Properties of Undoped and Ti-Doped ZnO Nanoparticles Prepared by Modified Oxalate Route. Hindawi Journal of Nanomaterials Vol. 2018, 9072325, 9 pages.
• [20] A. Ronen, R. Semiat and C.G. Dosoretz. "Antibacterial efficiency of a composite spacer containing zinc oxide nanoparticles", Procedia Engineering, pp. 44581-582, 2012.
• [21] K.M. Reddy, K. Feris, J. Bell, D.G. Wingett, C. Hanley and A. Punnoose. "Selective toxicity of zinc oxide nanoparticles to prokaryotic and eukaryotic systems", Appl Phys Lett, vol. 90, pp. 1-3, 2007.
• [22] K.R. Rasmi, S.C. Vanithakumari, R.P. George and U. Kamachi Mudali. "Active Nano Metal Oxide Coating for Bio-fouling Resistance", Trans Indian Inst Met, vol. 71 (6), p. 1323- 1329, 2018.
• [23] M. Roknian, A. Fattah-alhosseini, S.O. Gashti and M.K. Keshavarz. "Study of the effect of ZnO nanoparticles addition to PEO coatings on pure Ti substrate: microstructural analysis, antibacterial effect and corrosion behavior of coatings in Ringer's physiological solution", J. Alloys Compd. vol. 740, pp. 330-345, 2018.
• [24] L.F. Sukhodub, L.B. Sukhodub, W. Simka and M. Kumeda. "Hydroxyapatite and brushite coatings on plasma electrolytic oxidized Ti6Al4V alloys obtained by the thermal substrate deposition method", Materials Letters, vol. 250, pp. 163-166, 2019.
• [25] L. Sukhodub, A. Panda, L. Sukhodub, M. Kumeda, K. Dyadyura and I. Pandová. "Hydroxyapatite and zinc oxide based two-layer coating, deposited on ti6al4v substrate", MM Science Journal, pp. 3494-3499, (2019).
• [26] R. Sergia, D. Bellucci, R.T. Candidato Jr, L. Lusvarghi, G. Bolelli, L. Pawlowski, G. Candiani, L. Altomared, L. De Nardo and V. Cannillo. Bioactive Zn-doped hydroxyapatite coatings and their antibacterial efficacyagainst Escherichia coli and Staphylococcus aureus. Surface & Coatings Technology, Vol. 352, pp. 84-91, 2018.
• [27] S. Spriano, S. Yamaguchi, F. Baino and S. Ferraris. "A critical review of multifunctional titanium surfaces: New frontiers for improving osseointegration and host response, avoiding bacteria contamination", Acta Biomater. vol. 79, pp. 1-22, 2018.
• [28] S. Stankic, S. Suman, F. Haque and J. Vidic. "Pure and multi metal oxide nanoparticles: synthesis, antibacterial and cytotoxic properties", J Nanobiotechnol., vol. 14, pp. 73, 2016.
• [29] L. Tan, J. Li, X. Liu, Z. Cui, X. Yang, K. Wai, K. Yeung, H. Pan, Y. Zheng, X. Wang and S. Wu. "Thermal-Triggered Release from Black Phosphorous with Strengthened Chemical Stability", Small, vol. 14 (9), pp. 1703197, 2018.
• [30] R.K. Thareja and S. Shukla. "Synthesis and characterization of zinc oxide nanoparticles by laser ablation of zinc in liquid", Appl. Surf. Sci., vol. 253, pp. 8889-8895, 2007.
• [31] X. Xie, C. Mao, X. Liu, L. Tan, Z. Cui, X. Yang, S. Zhu, Z. Li, X. Yuan, Y. Zheng, K.W.K. Yeung, P.K. Chu and S. Wu. "Tuning the Bandgap of Photo-Sensitive Polydopamine/Ag3PO4/ Graphene Oxide Coating for Rapid, Noninvasive Disinfection of Implants", ACS Central Science, vol. 4(6), pp. 724- 738, 2018.
• [32] А. Yanovska, V. Kuznetsov, A. Stanislavov, S. Danilchenko and L. Sukhodub. "Synthesis and characterization of hydroxyapatite-based coatings for medical implants obtained on chemically modified Ti6Al4V substrates", J. Surf. Coat. Technol., vol. 205, pp. 5324-5329, 2011.
• [33] А. Yanovska, V. Kuznetsov, A. Stanislavov, S. Danilchenko and L. Sukhodub. "A study of brushite crystallization from calcium-phosphate solution in the presence of magnesium under the action of a low magnetic field", Materials science and engineering C, vol. 32, pp. 1883-1887, 2012.
• [34] Z.Z. Feng, X.M. Liu, L. Tan, Z.D. Cui, X.J. Yang, Z.Y. Li, Y.F. Zheng, K.W.K. Yeung and S.L. Wu. "Electrophoretic Deposited Stable Chitosan@MoS2 Coating with Rapid In Situ Bacteria-Killing Ability under Dual-Light Irradiation", Small, vol. 14 (21), pp. 1704347, 2018.
• [35] X. Zhang, H. Wang, J. Li, X. He, R. Hang, X. Huang, L. Tian, B. Tang. "Corrosion behavior of Zn-incorporated antibacterial TiO2 porous coating on Ti", Ceram. Int., vol. 42, pp. 17095-17100, 2016.
• [36] Y. Zhang, X. Liu, Z. Li, S. Zhu, X. Yuan, Z. Cui, X. Yang, P. K Chu and S. Wu. "Nano Ag/ZnO Incorporated Hydroxyapatite Composite Coatings: Highly Effective Infection Prevention and Excellent Osteointegration", ACS Applied Materials & Interfaces, p. 1-46, 2018.
• [37] A. Panda, J. Duplak, J. Jurko and M. Behun. "Comprehensive Identification of Sintered Carbide Durability in Machining Process of Bearings Steel 100CrMn6", Advanced Materials, Research, vol. 340, pp. 30-33, 2011.
• [38] A. Panda, K. Dyadyura, J. Valicek, M. Harnicarova, J. Zajac, V. Modrak, I. Pandova, P. Vrabel, E. Novakova-Marcincinova and Z. Pavelek. "Manufacturing Technology of Composite Materials – Principles of Modification of Polymer Composite Materials Technology Based on Polytetrafluoroethylene". Materials, vol. 10, no. 4, pp. 337, 2017.
• [39] J. Valicek, M. Harnicarova, A. Panda, I. Hlavaty, M. Kusnerova, H. Tozan, M. Yagimli and V. Vaclavik. "Mechanism of Creating the Topography of an Abrasive Water Jet Cut Surface". Machining, joining and modifications of advanced materials, vol. 61, pp. 111-120, 2016.
• [40] A. Panda, Š. Olejárová, J. Valíček and M. Harničárová. "Monitoring of the condition of turning machine bearing housing through vibrations". International Journal of Advanced Manufacturing Technology, vol. 97, no. 1-4, pp. 401-411, 2018.
• [41] J. Valicek, M. Harnicarova, I. Kopal, Z. Palková, M. Kušnerová, A. Panda and V. Šepelák. "Identification of Upper and Lower Level Yield strength in Materials". Materials, vol. 10, no. 9, pp. 1-20, 2017.
• [42] A. Panda, J. Dobránsky, M. Jančík, I. Pandová and M. Kačalová. "Advantages and effectiveness of the powder metallurgy in manufacturing technologies". Metalurgija, vol. 57, no. 4, pp. 353-356, 2018.
• [43] J. Valicek, M. Harnicarova, I. Hlavaty, R. Grznárik, M. Kusnerova, Z. Mitaľová and A. Panda. "A new approach for the determination of technological parameters for hydroabrasive cutting of materials". Materialwissenschaft und Werkstofftechnik, vol. 47, pp. 462-471, 2016.
• [44] I. Pandova, T. Gondova and K. Dubayova. "Natural and Modified Clinoptilolite Testing for Reduction of Harmful Substance in Manufacturing Exploitation". Advanced Materials Research, vols. 518-523, pp. 1757-1760, 2012.
• [45] J. Macala, I. Pandova, T. Gondova and K. Dubayova. "Reduction of polycyclic aromatic hydrocarbons and nitrogen monooxide in combustion engine exhaust gases by clinoptilolite". Gospodarka Surowcami Mineralnymi, vol. 28, no. 2, pp. 113-123. 2012.
• [46] J. Macala, I. Pandova and A. Panda. "Zeolite as a prospective material for the purification of automobile exhaust gases". Mineral resources management, vol. 33, no. 1, pp. 125-138. 2017.
• [47] J. Macala, I. Pandova and A. Panda. "Zeolite as a prospective material for the purification of automobile exhaust gases". Mineral resources management, vol. 25, no. 4, pp. 23-32. 2009.
• [48] A. Panda, V. Nahornyi, I. Pandová, M. Harničárová, M. Kušnerová, J. Valíček and J. Kmec. "Development of the method for predicting the resource of mechanical systems". International Journal of Advanced Manufacturing Technology, vol. 105, no. 1-4, pp. 1563-1571, 2019.
• [49] M. Balara, D. Duplakova and D. Matiskova. "Application of a signal averaging device in robotics 2018". Measurement. vol. 115, pp. 125-132, 2018.
• [50] M. Durdan, B. Stehlikova, M. Pastor, J. Kacur, M. Laciak and P. Flegner. "Research of annealing process in laboratory conditions". Measurement, vol. 73, 2015, pp. 607-618. ISSN 0263-2241.
• [51] K. Monkova and P. Monka. "Some aspects influencing production of porous structures with complex shapes of cells". Lecture Notes in Mechanical Engineering, pp. 267- 276, 2017.
• [52] S. Olejarova, J. Dobransky, J. Svetlik and M. Pituk. "Measurements and evaluation of measurements of vibrations in steel milling process". Measurement, vol. 106, pp. 18-25, 2017. ISSN 0263-2241.
• [53] M. Rimar, M. Fedak, A. Kulikov and P. Smeringai. "Study of gaseous flows in closed area with forced ventilation." MM Science Journal, vol. 2018, no. March, pp. 2188-2191, 2018.
• [54] J. Dobránsky, M. Pollák and Z. Doboš. "Assessment of production process capability in the serial production of components for the automotive industry". Management systems in production engineering, vol. 27, no. 4, pp. 255-258, 2019.
• [55] M. Pollák, J. Torok, J. Zajac, M. Kočiško and M. Teliskova. "The structural design of 3D print head and execution of printing via the robotic arm ABB IRB 140". ICIEA 2018, vol. 2018, pp. 194-198, 2018.
• [56] W. Bialy and J. Ružbarský. "Breakdown cause and effect analysis. Case study". Management systems in production engineering, vol. 26, pp. 83-87, 2018.
• [57] D. Duplakova, L. Knapcikova, M. Hatala and E. Szilagyi. "Mathematical modelling of temperature characteristics of RFID tags with their subsequent application in engineering production". TEM Journal-Technology Education Management Informatics, vol. 5, pp. 411-416, 2016.
• [58] J. Kascak, P. Baron, M. Teliskova, J. Zajac, J. Torok and J. Husar. "Implementation of augmented reality into the training and educational process in order to support spatial perception in technical documentation". 6 th IEEE international conference on industrial engineering and applications, pp. 583-587, 2019.
• [59] R. Bielousova. "Developing materials for english for specific purposes online course within the blended learning concept". TEM Journal-Technology Education Management Informatics, vol. 6, pp. 637-642, 2017.
• [60] Ľ. Straka, I. Čorný and J. Piteľ. "Properties evaluation of thin microhardened surface layer of tool steel after wire EDM". Metals, vol. 6, no. 5, pp. 1-16, 2016.
• [61] Ľ. Straka, I. Čorný and J. Piteľ. "Prediction of the geometrical accuracy of the machined surface of the tool steel EN X30WCrV9-3 after electrical discharge machining with CuZn37 wire electrode". Metals, vol. 7, no. 11, pp. 1-19, 2017.

Uwagi

Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2021).