Systemy sterowania tolerujące uszkodzenia - sytuacja 2005

• Autorzy: Leszczyński L.

Warianty tytułu

EN

Fault- tolerant control systems - the 2005 situation

• Języki publikacji: PL

Abstrakty

PL

W artykule przedstawiono ogólny przegląd aktualnej wiedzy w dziedzinie systemów sterowania tolerujących uszkodzenia (FTC). Jest to młoda, interdyscyplinarna dziedzina, działająca na styku diagnostyki, sterowania i systemów nadzoru. Omówione zostały cele wdrażania systemów FTC, oraz pokazano ich ogólny schemat działania. Poprzez odniesienie do literatury zaprezentowano najnowsze osiągnięcia w dziedzinie, opublikowane po roku 2003.

EN

In this paper, we present a general review of the actual state of the art in the subject of fault tolerant control systems (FTCS). The subject is a relatively new, interdisciplinary area of knowledge, incorporating diagnosis, control and supervision. We consider the scope and motivation of implementing FTCS, as well as a general FTCS structure. About 30 references to cuircnt work (post - 2003) are listed to provide an outline of recent development in the Field.

Słowa kluczowe

PL

systemy sterowania tolerujące uszkodzenia

EN

fault-tolerant control system

• Wydawca: Wydawnictwo PAK
• Czasopismo: Pomiary Automatyka Kontrola
• Rocznik: 2005
• Tom: R. 51, nr 9 bis
• Strony: 280--282
• Opis fizyczny: Bibliogr. 40 poz., rys.

Twórcy

autor

Leszczyński L.

• Politechnika Warszawska, Instytut Automatyki i Robotyki

Bibliografia

• [1] S. Black, K. Keller, K. Swearingen, M. Vandernoot, M. Mood, J. Urnes, and A B. Page. Reconfigurable control and fault identification system. In IEEE Aerospace Conference 2004, volume 5, pages 3481 - 3494, 2004.
• [2] M. Blanke, C. W. Frei, F. Kraus, M. Staroswiecki, and R. J. Patton. What is fault-tolerant control. In IFAC SAFEPROCESS 2000, Budapest, 2000.
• [3] M. Blanke and R. Izadi-Zamanabadi. A ship propulsion system as a benchmark for fault-tolerant control. Control Eng. Practice, 7:227-239, 1999.
• [4] M. Blanke, M. Kinnaert, J. Lunze, and M Staroswiecki. Diagnosis and Fault-Tolerant Confrol. Springer - Verlag, 2004.
• [5] S. A. Bøgh, Izadi-Zamanabadi R., and M. Blankc. Onboard superivisor for the orsted satellite attitude control system. In Artificial Intelligence and Knowledge Based Systems for Space, 5th Workshop, pages 137-152, 1995.
• [6] C. Bonivento, A. Isidori, Marconi L., and A. Paoli. Implicit fault-tolerant control: application to induction motors. Automatica, 40:355-371, 2004.
• [7] C. Bonivento, A. Paoli, and L. Marconi. Fault-tolerant control of the ship propulsion system benchmark. Control Eng. Practice, 11:483-492, 2003.
• [8] W. Chen and J. Jiang. Fault-tolerant control against stuck actuator faults. IEEE Proceedings on Control Theory and Applications, 152:138-146, 2005.
• [9] Matthew O. T. Cole, Patrick S., Keogh, Mehmed M. Sahinkaya, and Clifford R. Burrows. Towards fault-tolerant active control of rotor-magnetic bearing systems. Control Eng. Practice, 12:491-501, 2004.
• [10] W. De-Jun and L. Yuan-Chun. Estimation of effectiveness factor on-line and fault tolerant control. In Machine Learning and Cybernetics, 2003. International Conference on, volume 2, pages 765- 770, 2003.
• [11] D. del Gobbo, B. Cukie, R. Napolitano, and S. Eastcrbrook. Fault delegability analysis for requirements validation of fault tolerant systems. In High-Assurance Systems Engineering, IEEE Int. Symposium on, pages 231-238, 1999.
• [12] N. Eva Wu. Coverage in fault-tolerant control. Automation, 40:537-548, 2004.
• [13] N. Eva Wu, K. Zhou, and G. Salomon. Control reconfigurability of linear time-invariant systems. Automatical 36:1767-1771, 2000.
• [14] C. W. Frei, F. J. Kraus, and M. Blanke. Recoverability viewed as a system property. In European Control Conference, 1999.
• [I5] Z. Gang., Zhiquan W., W. Xianglan, and H Shousong. Research on satisfactory control theory and its application in fault-tolerant technology. In WCICA 2004. Fifth World Congress on, volume 2, pages 1521-1524, 2004.
• [16] P. Haider, S. K. Chaudhuri, and S. Mukhopadhyay. Fault detection, diagnosis and control in a tactical aerospace vehicle. In TENCON 2003, volume 4, pages 1357-1361, 2003.
• [17] R. Isermann and P. Balle. Trends in the application of model-based fault detection and diagnosis of technical processes. Control Eng. Practice, 5: 709-719, 1997.
• [18] Y. Izumikawa, K. Yubai, and J. Hirai. Fault-tolerant control system of flexible aim for sensor fault by using reaction force observer. In Advanced Motion Control, 2004, pages 583-588, 2004.
• [19] J. Jiang and Q. Zhao. Design of reliable control systems possessing actuator redundancies. J. of Guidance, Control and Dynamics, 23:709-718, 2000.
• [20] M. Karpenko and N. Sepehri. Fault-tolerant control of a servohydraulic positioning system with crossport leakage. Control Systems Technology, IEEE Transactions on, 13:155-161, 2005.
• [21] J. Korbicz, J. M. Kościelny, Z. Kowalczuk, and W. Cholewa. Fault Diagnosis. Springer-Verlag, 2004.
• [22] L. Leszczyński and J. Pułaczewski. Dwuetapowe algorytmy sterowania. Pomiary, Automatyka, Regulacja, 4, 2004.
• [23] Guangjun Liu, Dejun Wang, and Yuangchun Li, Active fault tolerant control with actuation reconfiguration. Aerospace and Electronic Systems, IEEE Transactions on, 40:1110-1117, 2004.
• [24] S. Manuja, S. Patwardhan, and S. Narasimhan. Fault tolerant control with identified models: An experimental study. In Intelligent Sensing and Information Processing, Int. Conference on. pages 460-465, 2004.
• [25] Ron J., Patton. Fault-tolerant control systems: The 1997 situation. In IFAC SAFEPROCESS '97. pages 1033-1055, Hull, GB. 1997.
• [26] M. Polycarpou, Xiaodong Zhang, R. Xu, Yanli Yang, and Chiman Kwan. A neural network based approach to adaptive fault tolerant flight control. In Intelligent Control. IEEE Int. Symposium on, pages 61-66, 2004.
• [27] D. Shore and MBodson. Flight testing of a rcconfigurable control system on an unmanned aircraft. In American Control Conference 2004, volume 4, pages 3747-3752, 2004.
• [28] Marcel Staroswiecki and Anne-Lise Gchin. From control to supervision. Anual Reviews in Control, 25:1 II, 2001.
• [29] Robert F.,Stengel. Intelligent failure-tolerant control. IEEE Control Systems Magazine, pages 14-23, July 1991.
• [30] J. Stoustrup and V. D. Blondel. Fault tolerant control: A simultaneous stabilization result. IEEE Transactions on Automatic Control, 49:305-310, 2004.
• [31] R. J. Veillette and W. R. Mcdanic, J. V. an Perkins. Design of reliable control systems. IEEE Trans. Automatic Control 37:290-300, 1992.
• [32] De-Jun Wang and Yuan-Chun Li. Fault tolerant control in symmetrically interconnected systems. In Machine Learning and Cybernetics, 2004, volume 1, pages 409-413, 2004.
• [33] Y. Yang, G. H. Yang, and Y. C Son. Reliable control of discrete-time systems with actuator failure. IEE Proc. - Control Theory and Applications, 147:428-432, 2000.
• [34] G. G. Yen and P. G DeLima. Improving the performance of globalized dual heuristic programming for fault tolerant control through an online learning supervisor. Automation Science and Engineering, IEEE Transactions on, 2:121-131, 2005.
• [35] Ding-Li Yu, T. K. Chang, and Ding-Wen Yu. Fault tolerant control of multivariate processes using auto-tuning pid controller. Systems, Man and Cybernetics, Part B, IEEE Transactions on, 35:32-43, 2005.
• [36] Praca zbiorowa. Diagnostyka procesów. Modele. Metody sztucznej inteligencji. Zastosowania. WNT, 2004.
• [37] Xiaodong Zhang, T. Parisini, and M. M. Polycarpou. Adaptive fault-tolerant control of nonlinear uncertain systems: an information-based diagnostic approach. Automatic Control, IEEE Transactions on, 49:1259-1274, 2004.
• [38] Y. Zhang. Active Fault Tolerant Control Systems. Springer - Verlag, 2003.
• [39] Y. M. Zhang and J. Jiang. Bibliographical review on rcconfigurable fault-tolerant control systems. In IFAC SAFEPROCESS 2003, pages 265-276, Washington DC, U. S. A. 2003.
• [40] F. Zidani., M. E. H. Benbouzid, D. Diallo, and A. Benehaib. Active fauft-tolerant control of induction motor drives in cv and hev against sensor failures using a fuzzy decision system. In Electric Machines and Drives Conference, volume 2, pages 677-683, June 2003.