Corrosion Behaviour Correlation of the Secondary Aluminium Casts in Natural Atmosphere and Laboratory Conditions

• Autorzy: Kuchariková L. , Liptáková T. , Tillová E. , Bonek M. , Medvecká D.

Identyfikatory

DOI

10.24425/amm.2020.133713

• Języki publikacji: EN

Abstrakty

EN

The secondary aluminium alloys are very important material in actual industry from economic and ecological point of view. The secondary aluminium used for production of casts, however, contains some elements, i.e. iron, – affecting physical, chemical and mechanical behaviour. The subject of our investigation has been corrosion behaviour in natural atmosphere of the hypoeutectic AlSi7Mg0.3 cast alloys with various content of iron, because the Fe content affects not only mechanical properties but corrosion resistance, as well. Three types of the AlSi7Mg0.3 cast alloys were exposed for 9 months in natural atmosphere and the measure of their degradation by corrosion was found by determination of the weight loss and the light microscopy. In addition, a scanning electron microscopy (SEM) analyses and evaluation of surface changes were used. The corrosion behaviour in natural atmosphere was compared to results of the carried out electrochemical and exposure laboratory experiments in chloride solutions.

Słowa kluczowe

EN

secondary aluminium alloys; high Fe content; corrosion properties; natural atmosphere

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2020
• Tom: Vol. 65, iss. 4
• Strony: 1455--1462
• Opis fizyczny: Bibliogr. 28 poz., fot., rys., tab.

Twórcy

autor

Kuchariková L.

• University of Žilina, Faculty of Mechanical Engineering, Department of Materials Engineering, Univerzitná 8215/1, 01026 Žilina, Slovakia

autor

Liptáková T.

• University of Žilina, Faculty of Mechanical Engineering, Department of Materials Engineering, Univerzitná 8215/1, 01026 Žilina, Slovakia

autor

Tillová E.

• University of Žilina, Faculty of Mechanical Engineering, Department of Materials Engineering, Univerzitná 8215/1, 01026 Žilina, Slovakia

autor

Bonek M.

• Silesian University of Technology, Institute of Engineering Materials and Biomaterials, Konarskiego 18A, 44 100 Gliwice, Poland

autor

Medvecká D.

• University of Žilina, Faculty of Mechanical Engineering, Department of Materials Engineering, Univerzitná 8215/1, 01026 Žilina, Slovakia

Bibliografia

• [1] A. Bialobrzeski, J. Pezda, A. Jarco, Arch. Metall. Mater. 62/4, 2371-2374 (2017). DOI: 10.1515/amm-2017-0349
• [2] J. Hirsch, T. Al-Samman, Acta Materialia 61, 818-843 (2013), https://doi.org/10.1016/j.actamat.2012.10.044
• [3] C. Cai, H. Geng, S. Wang, B. Gong, Z. Zhang, Materials (Basel). 11/5, 809-822 (2018). DOI:10.3390/ma11050809
• [4] T. Tański, K. Labisz, B. Krupińska, M. Krupiński, M. Król, R. Maniara, W. Borek, Journal Therm Anal Calorim. 123/1, 63-74 (2016). DOI 10.1007/s10973-015-4871-y
• [5] N. Náprstková, J. Cais, Production Engineering Archives 3/2, 10-13 (2014).
• [6] R. A. Rodríguez-Diaz, J. Uruchurtu-chavarín, A. M. Cotero-Villegas, S. Valdez, J. A. Juárez-Islas, Int. J. Electrochem. Sci. 10, 1792-1808 (2015)
• [7] W. R. Osório, P. R. Goulart, A. Garcia, Materials Letters 62, 365-369 (2008).
• [8] W. R. Osório, N. Cheung, J. E. Spinelli P. R. Goulart, A. Garcia, Journal Solid State Electrochem. 11, 1421-1427 (2007).
• [9] S. Cecchel, G. Cornacchia, M. Gelfi, Materials and Corrosion 68, 961-969 (2017).
• [10] M. Kliskic, J. Radosevic, S. Gudic, V. Katalinic, Journal of Applied Electrochemistry 30, 823-830 (2000).
• [11] R. Escalera-Lozano, M. I. Pech-Canul, M. A. Pech-Canul, M. Montoya-Dávila, A. Uribe-Salas, The Open Corrosion Journal 3, 73-79 (2010).
• [12] F. Ostermann, Springer-Viewer Verlag. S. 233. (2015) ISBN: 978-3-662-43806-0
• [13] E. Linardia, R. Haddad, L. Lanzan, Procedia Materials Science 1, 550-557 (2012).
• [14] S. Jain, The Ohio State University; Columbus, OH, USA: 2006. PhD. Thesis with title: Corrosion and Protection of Heterogeneous Cast Al-Si (356) and Al-Si-Cu-Fe (380) Alloys by Chromate and Cerium Inhibitors.
• [15] K. A. Yasakau, M. L. Zheludkevich, S. V. Lamaka, M. G. S. Ferreira, Electrochim. Acta 52, 7651-7659 (2007). DOI: 10.1016/j.electacta.2006.12.072
• [16] P. Chen, L. H. Liang et al., Advanced Materials Research 900, 96-99 (2014). DOI: 10.4028/www.scientific.net/AMR.900.96.
• [17] F. L. Zeng, Z. L. Wei et al., Transactions of Nonferrous Metals Society of China. 21/12, 2559-2567. (2011). DOI: 10.1016/S1003-6326(11)61092-3
• [18] A. M. Samuel, F. H. Samuel, H. W. Doty, S. Valtierra, International Journal of Metalcasting 12/1, 55-70 (2018).
• [19] W. Khalifa, F. H. Samuel, J. E. Gruzleski, Metall. Mater. Trans. A 34, 807-825 (2003).
• [20] J. A. Taylor, G. B. Schaffer, D. H. Stjohn, Metallurgical and Materials Transactions 30A, 1651-1655 (1999).
• [21] S. Cecciel, G. Cornacchia, M. Gelfi, Materials and Corrosion 68, 931-969 (2017). DOI: 10.1002/maco.201709526
• [22] L. Kuchariková, E. Tillová, M. Matvija, J. Belan, M. Chalupová, Arch. Metall. Mater. 62/1, 397-103 (2017). DOI: 10.1515/amm-2017-0062
• [23] M. Sacinti, E. Cubuklusu, Y. Birol, International Journal of Cast Metals Research 30/2, 96-102 (2017).
• [24] L. Hurtalová, E. Tillová, M. Chalupová, Metalurgija 54/1, 39-42 (2015).
• [25] L. Hurtalová, E. Tillová, M. Chalupová, Materials Science Forum 782, 359-364 (2014).
• [26] K. Kreislová, D. Knotková, Materials 10, 394-404 (2017).
• [27] S. Sun, Q. Zheng, D. Li, J. Wen, Corrosion Science 51, 719-727 (2009).
• [28] L. Kuchariková, T. Liptáková, E. Tillová, D. Kajánek, E. Schmidová, Metals 8/8, 581 (2018).

Uwagi

EN

This work was supported under the projects: of the Scientific Grant Agency of the Ministry of Education, Science and Sports of the Slovak Republic Academy of Science No 1/0398/19 and No 049ŽU-4/2017, in addition by project of Operational Program Research and Innovation: “Research and development activities of the University of Žilina in the Industry of 21st century in the field of materials and nanotechnologies”, No. 313011T426. The project is co-funded by European Regional Development Fund. The publication is the result of bilateral cooperation within the Polish National Agency of Academic Exchange. The publication was co-financed from the statutory grant of the Faculty of Mechanical Engineering at the Silesian University of Technology in 2019.