Tytuł artykułu
Autorzy
Wybrane pełne teksty z tego czasopisma
Identyfikatory
Warianty tytułu
Języki publikacji
Abstrakty
The resonant type power supplies of medium frequency designed for magnetron sputtering processes often use pulse density modulation to regulate the average discharge power level. While the output power level changes then number of pulses in a group changes, but the discharge current pulses are the same from pulse to pulse: their parameters (duration time, amplitude) do not change with the discharge power. The goal of this paper is to present the influence of medium frequency discharge power level on the direct current I-V characteristics of a single Langmuir probe and resulting plasma parameters caused by the pulse density modulation. The sputtering processes of titanium and copper were diagnosed at two spatial positions. The measured Langmuir probe I-V characteristics showed strong dependence on the discharge power. As the discharge powering pulses stay the same with the discharge power level change, such influence was unlikely to occur. Using time-resolved analysis of probe current waveforms the origin of this influence was indicated. The influence of discharge power level on the single probe Langmuir I-V characteristics and resulting plasma parameters was eliminated using a simple method of scaling the results. Finally, the reliable plasma parameters were calculated.
Wydawca
Czasopismo
Rocznik
Tom
Strony
374--385
Opis fizyczny
Bibliogr. 47 poz., rys.
Twórcy
autor
- Faculty of Microsystems Electronics and Photonics, Wroclaw University of Technology, Janiszewskiego 11/17, 50-372 Wroclaw, Poland
autor
- Faculty of Microsystems Electronics and Photonics, Wroclaw University of Technology, Janiszewskiego 11/17, 50-372 Wroclaw, Poland
Bibliografia
- 1. Bräuer G., Szyszka B., Vergöhl M., Bandorf R., Vacuum, 84 (2010), 1354.
- 2. Helmersson U., Lattemann M., Bohlmark J., Ehiasarian A.P., Gudmundsson J.T., Thin Solid Films, 513 (2006), 1.
- 3. Musil J., Baroch P., Vlček J., Nam K.H., Han J.G., Thin Solid Films, 475 (2005), 208.
- 4. Kelly P.J., Arnell R.D., Vacuum, 56 (2000), 159.
- 5. Musil J., Baroch P., Vacuum, 87 (2013), 96.
- 6. Baghriche O., Ehiasarian A.P., Kusiak-Nejman E., Pulgarin C., Sanjines R., Morawski A.W., Kiwi J., J.Photoch.Photobiol.A, 227 (2012), 11.
- 7. Anders A., Surf.Coat.Technol., 205 (2011), S1.
- 8. Lin J., Sproul W.D., Moorej.J., Wu Z., Lee S., Chistyakov R., Abraham B., Struct.Funct.Biol.ThinFilms, 63 (2011), 48.
- 9. Gudmundsson J.T., Vacuum, 84 (2010), 1360.
- 10. Anders A., Surf.Coat.Technol., 204 (2010), 2864.
- 11. Kelly P.J., West G., Kok Y.N., Bradley J.W., Swindells I., Clarke G.C.B., Surf.Coat.Technol., 202 (2007), 952.
- 12. Anders A., Surf.Coat.Technol., 200 (2005), 1893.
- 13. Musil J., Kadlec S., Münz W.D., J.Vac.Sci.Tech-nol.A, 9 (1991), 1171.
- 14. Rogozin A., Vinnichenko M., Shevchenko N., Kolitsch A., Müller W., Thin Solid Films, 496 Uller(2006), 197.
- 15. Britun N., Han J.G., Thin Solid Films, 516 (2008), 6542.
- 16. Britun N., Gaillard M., Oh S.G., Han J.G., J.Phys.D.Appl.Phys., 40 (2007), 5098.
- 17. Belkind A., Zhu W., Lopez J., Becker K., Plasma Sources Sci.T., 15 (2006), S17.
- 18. Bradley J.W., B äcker H., Kelly P.J., Arnell R.D., Surf.Coat.Technol., 135 (2001), 221.
- 19. Langmuir I., Mott-Smith H.M., Phys.Rev., 28 (1926), 727.
- 20. Merlino R.L., Am. J. Phys. 75 (2007), 1078.
- 21. Chen F.F., Phys.Plasmas, 14 (2007), 094703.
- 22. Chen F.F., Phys.Plasmas, 8 (2001), 3029.
- 23. Chen F.F., Evans J.D., Arnush D., Phys.Plasmas, 9 (2002), 1449.
- 24. Tichy M., Kudrna P., Behnke J.F., Csambal C., Klagge S., J.Phys., 7 (1997), 397.
- 25. Window B., Savvides N., J.Vac.Sci.Technol.A,4 (1986), 196.
- 26. Samuell C.M., Blackwell B.D., Howard J., Corr C.S., Phys.Plasmas, 20 (2013), 034502.
- 27. Johnson J.D., Holmes A.J.T., Rev.Sci.Instrum., 61 (1990), 2628.
- 28. Spolaore M., Antoni V., Bagatin M., Buffa A., Cavazzana R., Desideri D., Martines E., Pomaro N., Serianni G., Tramontin L., Surf.Coat.Technol., 116 (1999), 1083.
- 29. Posadowski W.M., Thin Solid Films, 392 (2001), 201.
- 30. Brudnik A., Czapla A., Posadowski W., Vacuum, 82 (2008), 1124.
- 31. Straňäk V., HubičKa Z., AdáMek P., BlažEk J., TichÞ M.,ŠPatenka P., Hippler R., Wrehdes.,Surf.Coat.Technol.,201(2006),2512.
- 32. Liebig B., Braithwaite N., Kelly P.J., Chistyakov R., Abraham B., Bradley J.W., Surf.Coat.Technol., 205 (2011), S312.
- 33. Gudmundsson J.T., Alami J., Helmersson U., Appl.Phys.Lett., 78 (2001), 3427.
- 34. Wiatrowski A., Vacuum, 82 (2008), 1111.
- 35. Wiatrowski A., Posadowski W.M., Radzimski Z.J., J.Vac.Sci.Technol.A, 26 (2008) 1277.
- 36. Gencoa Ltd.: Www.Gencoa.Com/Balance_And_ Unbalance/ (2015).
- 37. Dora J., Polish Patent No. 313150, 1996.
- 38. Posadowski W.M., Wiatrowski A., Dora J., Radzimski Z.J., Thin Solid Films, 516 (2008), 4478.
- 39. Depla D., Buyle G., Haemers J., De Gryse R., Surf.Coat.Technol., 200 (2006), 4329.
- 40. Bradley J.W., B äcker H., Surf.Coat.Technol., 200 (2005), 616.
- 41. Bradley J.W., B äcker H., Kelly P.J., Arnell R.D., Surf.Coat.Technol., 142 (2001), 337.
- 42. Drache S., Stranak V., Herrendorf A., Cada M., Hubicka Z., Tichy M., Hippler R., Vacuum, 90 (2013), 176.
- 43. Poolcharuansin P., Bradley J.W., Plasma Sources Sci.T, 19 (2010), 025010.
- 44. Passoth E., Kudrna P., Csambal C., Behnke J.F., Tich Þ; M., Helbig V., J.Phys.D:Appl.Phys, 30 (1997), 1763.
- 45. Rossnagel S.M., J.Vac.Sci.Technol.A, 6 (1988), 1821.
- 46. Helmersson U., Lattemann M., Bohlmark J., Ehiasarian A.P., Gudmundsson J.T., Thin Solid Film, 513 (2006), 1.
- 47. Chen F.F., Lecture Notes on Langmuir Probe Diagnostics, IEEE-ICOPS meeting, Mini-Course on Plasma Di-agnostics, Jeju, Korea, June 2003, http://www.seas. ucla.edu/~ffchen/publications.htm (2015).
Uwagi
Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-1eff7082-46f9-4c6f-9375-bf2b5790331a