Micro-jet Cooling by Compressed Air after MAG Welding

• Autorzy: Węgrzyn T. , Piwnik J. , Tarasiuk W. , Stanik Z. , Gabrylewski M.

Identyfikatory

DOI

10.1515/afe-2016-0036

• Języki publikacji: EN

Abstrakty

EN

The material selected for this investigation was low alloy steel weld metal deposit (WMD) after MAG welding with micro-jet cooling. The present investigation was aimed as the following tasks: analyze impact toughness of WMD in terms of micro-jet cooling parameters. Weld metal deposit (WMD) was first time carried out for MAG welding with micro-jet cooling of compressed air and gas mixture of argon and air. Until that moment only argon, helium and nitrogen and its gas mixture were tested for micro-jet cooling.

Słowa kluczowe

EN

MAG; steel weld; welding; microjets; cooling; acicular ferrite; impact toughness; compressed air

PL

stal stopowa; spawanie; udarność; chłodzenie

• Wydawca: Komisja Odlewnictwa Polskiej Akademii Nauk Oddział w Katowicach
• Czasopismo: Archives of Foundry Engineering
• Rocznik: 2016
• Tom: Vol. 16, iss. 2
• Strony: 111--114
• Opis fizyczny: Bibliogr. 10 poz., fot., rys., tab.

Twórcy

autor

Węgrzyn T.

• Silesian University of Technology, Katowice, Poland

autor

Piwnik J.

• Bialystok University of Technology, Mechanical Faculty, Wiejska 45C, 15-351 Bialystok, Poland

autor

Tarasiuk W.

• Bialystok University of Technology, Mechanical Faculty, Wiejska 45C, 15-351 Bialystok, Poland

autor

Stanik Z.

• Silesian University of Technology, Katowice, Poland

autor

Gabrylewski M.

• Bialystok University of Technology, Mechanical Faculty, Wiejska 45C, 15-351 Bialystok, Poland

Bibliografia

• [1] Wegrzyn T., Piwnik J. & Hadryś D., (2013). Oxygen in steel WMD after welding with micro-jet cooling, Archives of Metallurgy and Materials. 58(4).
• [2] Wegrzyn T., Piwnik J. & Hadryś, D. (2014). Acicular ferrite in micro welding technologies, Archives of Metallurgy and Materials. 59(2).
• [3] Węgrzyn, T., Piwnik, J. Wszołek, Ł. & Tarasiuk, W. (2015). Shaft wear after surfacing with micro-jet cooling, Archives of Metallurgy and Material. 60(4), 2625-2630.
• [4] Węgrzyn, T. Piwnik, J. Łazarz, B. & Tarasiuk, W. (2015). Mechanical properties of shaft surfacing with micro-jet cooling, ISSN 1392-1207. Mechanika. 21(5), 419-423.
• [5] Kurc-Lisiecka, A., Ozgowicz, W., Ratuszek, W. & Kowalska, J. (2013). Analysis of Deformation Texture in AISI 304 Steel Sheets, Solid State Phenomena. 203-204, 105-110, DOI: 10.4028/www.scientific.net/SSP.203-204.105.
• [6] Lisiecki, A. (2014). Welding of thermomechanically rolled fine-grain steel by different types of lasers, Arch. Metall. Mater. 59(4).
• [7] Golański, G., Zieliński, A., Słania, J. & Jasak, J. (2014). Mechanical Properties of VM12 steel after 30 000hrs of ageing at 600°C temperature. Archives of Metallurgy and Materials. 59(2).
• [8] Tarasiuk, W., Gordirnko, A.I., Wolocko A.T., Piwnik, J. & Szczucka-Lasota, B. (2015). The tribological properties of laser hardened steel 42CrMo4, Archives of Metallurgy and Materials. 60(4), 2939-2943.
• [9] Burdzik, R., Stanik Z. & Warczek, J. (2012). Method of assessing the impact of material properties on the propagation of vibrations excited with a single force impulse, Archives of Metallurgy and Materials. 57(2).
• [10] Burdzik, R., Konieczny, Ł., Stanik, Z., Folęga, P., Smalcerz, A. & Lisiecki, A. (2014). Analysis of impact of chosen parameters on the wear of camshaft, Archives of Metallurgy and Materials. 59(3).

Uwagi

PL

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę.