Fatigue crack growth and probability assessment for transverse TIG welded Aluminum alloy 6013-T4

• Autorzy: Haryadi G. D. , Tungga Dewa R. , Ekaputra I. M. W.

Identyfikatory

DOI

10.15632/jtam-pl.56.1.179

• Języki publikacji: EN

Abstrakty

EN

The aim of this study is to investigate the fatigue crack growth behavior with post weld heat treatments (T4) on transverse tungsten inert gas-welded Aluminum alloy 6013. All fatigue tests have been carried out using center cracked tension specimens at ambient temperature under a stress ratio of R = 0.3. The results revealed that various time of aging in T4 affects its mechanical properties, also the fatigue crack growth behavior as well. It has been observed that in the heat treated samples the crack growth rate is lower than that in the as-welded sample, but higher than the rate in the base metal. To be more specific, samples with 18 hours aging exhibit the highest tensile strength and fatigue resistance compared to the other heat treated samples. The probability assessment has also been used to determine the fatigue crack growth rate and a good linearity has been found.

Słowa kluczowe

EN

fatigue crack growth; Aluminum alloy 6013-T4; post welding heat treatment; TIG welding

• Wydawca: Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
• Czasopismo: Journal of Theoretical and Applied Mechanics
• Rocznik: 2018
• Tom: Vol. 56 nr 1
• Strony: 179--190
• Opis fizyczny: Bibliogr. 18 poz., rys., tab.

Twórcy

autor

Haryadi G. D.

• Diponegoro University, Department of Mechanical Engineering, Semarang, Indonesia

autor

Tungga Dewa R.

• Pukyong National University, Department of Mechanical Design Engineering, Busan, Korea

autor

Ekaputra I. M. W.

• Sanata Dharma University, Department of Mechanical Engineering, Yogyakarta, Indonesia

Bibliografia

• 1. Ambriz R.R., Mesmacque G., Ruiz A., Amrouche A., López V.H., Benseddiq N., 2010, Fatigue crack growth under a constant amplitude loading of Al-6061-T6 welds obtained by modified indirect electric arc technique, Science and Technology of Welding and Joining, 15, 6, 514-521
• 2. ASTM E 647-08, 2008, Standard Test Method for Measurement of Fatigue Crack Growth Rates, American Society for Testing Materials (ASTM), New York, U.S.A.
• 3. Dieter G.E., 1988, Mechanical Metallurgy, 4th ed., Tata McGraw Hill, New York, U.S.A.
• 4. Effertz P.S., Infante V., Quintino L., Suhuddin U., Hanke S., Dos Santos J.F., 2016, Fatigue life assessment of friction spot welded 7050-T76 aluminium alloy using Weibull distribution, International Journal of Fatigue, 87, 381-390
• 5. Eripret C., Hornet P., 1994, Prediction of overmatching effects on the fracture of stainless steel cracked welds, [In:] Miss-Matching of Welds, ESIS 17, K.H. Schwalbe, M. Ko¸cak (Edit.), London, 685-708
• 6. Haryadi G.D., Kim S.J., 2011, Influences of post weld heat treatment on fatigue crack growth behavior of TIG welding of 6013-T4 aluminum alloy joint. Part 1. Fatigue crack growth across the weld metal, Journal of Mechanical Science and Technology, 25, 9, 2161-2170
• 7. Heinz B., Skrotzki B., 2002, Characterization of a friction-stir-welded aluminum alloy 6013, Metallurgical and Materials Transactions B, 33B, 489-498
• 8. Kim W.G., Park J.Y., Hong S.D., Kim S.J., 2011, Probabilistic assessment of creep crack growth rate for Gr. 91 steel, Nuclear Engineering and Design, 241, 3580-3586
• 9. Maddox S.J., 2003, Review of fatigue assessment procedures for welded aluminium structures, International Journal of Fatigue, 1359-1378
• 10. Malarvizhi S., Raghukandan K., Viswanathan N., 2008, Investigations on the influence of post weld heat treatment on fatigue crack growth behaviour of electron beam welded AA2219 alloy, International Journal of Fatigue, 30, 1543-1555
• 11. Manti R., Dwivedi D.K., Argawal A., 2008, Pulse TIG welding of two Al-Mg-Si alloys, ASM International, 17, 6, 667-673
• 12. Paris P.C., Erdogan F.A., 1963, Critical analysis of crack propagation laws, Journal of Basic Engineering, Transactions ASME (Series D), 85, 528-534
• 13. Pukasiewicz A.G.M., Henke S.L., Casas W.J.P., 2006, Effect of post-weld heat treatment on fatigue crack propagation in welded joints in CA6NM martensite stainless steel, Welding International, 20, 12, 947-952
• 14. Rooy E.L., 2000, Introduction to aluminum and aluminum alloys, ASM Handbook, 2
• 15. Sivaraj P., Kanagarajan D., Balasubramanian V., 2014, Fatigue crack growth behaviour of friction stir welded AA7075-T651 aluminium alloy joints, Transactions of Nonferrous Metals Society of China, 24, 2459-2467
• 16. Sohn H.J., Haryadi G.D., Kim S.J., 2014, Statistical aspects of fatigue crack growth life of base metal, weld metal and heat affected zone in FSWed 7075-T651 aluminum alloy, Journal of Mechanical Science and Technology, 28, 10, 3957-3962
• 17. Yakubovski V.V., Valteris I.I., 1989, Geometrical parameters of butt and fillet welds and their influence on the welded joint fatigue life, International Institute of Welding, Document XIII, 132689
• 18. Zhang X., Wang S., Yan X., Yue D., Sun R., Zhou X., 2016, Probabilistic analysis for the functional and structural fatigue of NiTi wires, Materials and Design, 102, 213-224

Uwagi

PL

Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2018).