Parametric study of friction stir welding using elastic return

• Autorzy: Serier Mohamed , Berrahou Mohamed , Chikh Amina

Identyfikatory

DOI

10.2478/amtm-2020-0002

• Języki publikacji: EN

Abstrakty

EN

Aluminum alloy is a very useful material in light manufacturing. Friction stir welding (FSW) is a solid state assembly process that is achievable for this material. This work aims to characterize the quality of the weld joint by an operation of shaping (folding), it aims to study the rate of elastic return in this weld joint after a folding operation. In this context, the elastic return for the folding process has been modeled using experimental tests under optimal welding conditions.

Słowa kluczowe

EN

elastic return; optimization of experiments; folding process; FSW

• Wydawca: Wydawnictwo Politechniki Poznańskiej
• Czasopismo: Archives of Mechanical Technology and Materials
• Rocznik: 2020
• Tom: Vol. 40
• Strony: 7--11
• Opis fizyczny: Bibliogr. 13 poz., rys., tab.

Twórcy

autor

Serier Mohamed

• Institute of Sciences and Technology, University center of Relizane, Relizane 48000, Algeria

autor

Berrahou Mohamed

• Institute of Sciences and Technology, University center of Relizane, Relizane 48000, Algeria

autor

Chikh Amina

• Institute of Sciences and Technology, University center of Relizane, Relizane 48000, Algeria

Bibliografia

• [1] José, F., Lindolfo, F., Ricardo, I., Thermomechanical Modelling of FSW Process Using a Cylindrical Tool in an Aluminum Alloy Alclad AA 2024-T3. journal of Materials Research,. (2018).
• [2] Khodaverdizadeh, H,. Mahmoudi, A, Heidarzadeh A., and E. Nazari, Effect of friction stir welding (FSW) parameters on strain hardening behavior of pure copper joints, Materials and Design,. 330-334,(2012).
• [3] Oliveira, Miranda, A, C., Gerlich, A., Walbridge, S., Aluminum friction stir welds: Review of fatigue parameter data and probabilistic fracture mechanics analysis. Engineering Fracture Mechanics, (2015). 243-260.
• [4] Serier ,M, Berrahou, M, Tabti, A, Bendaoudi ,S, Effect of FSW welding parameters on the tensile strength of aluminum alloys, ARCH. MecH. TecH. MATER, 41-45, (2019).
• [5] Serier ,M, Bendaoudi ,S, Benmansour , D-L, and Tabti, A Numerical modelling of springback behavior in folding process, Advances in Materials Research, 75-81, (2019).
• [6] Fisher, R, The design of experiments. Oliver and Boyd 1935.
• [7] Designs of Experiments, Experimentique Edition, in: François Louvet, Luc Delplanque (Eds.), French Edition, 2005.
• [8] Pratiquer les plans d'experiences, in Jacques Goupil (Ed.), Edition Dunod, French Edition, 2005.
• [9] Andersson, A. Information exchange within the area of tool design and sheet-metal-forming simulations, J. Eng. Des.,283-291, (2001)
• [10] Lepadatu, D, Optimisation du procede de pliage, Thése de doctorat ; Université d’Angers, Angers, France. (2006).
• [11] Goupy J, Creighton, L. D, Introduction aux plans d’expériences (2006).
• [12] Rakesh R, Antonio C- O-M' ShiHui G, Scott W, Adrian, G Fatigue analysis of friction stir welded butt joints under bending and tension load "Engineering Fracture Mechanics, 34-45 (2019).
• [13] Schneider D.H., Stafford J.P.B, Varner T.W. Optimizing weld quality of a friction stir welded aluminum alloy, Journal of Materials Processing Technology, 188-196,(2015).

Uwagi

Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2020).