High Temperature Corrosion Performance of Carbon Steel Coated with Iron Aluminide in Mixture of O2 and SO2 Atmosphere

• Autorzy: Omranian-Mohammadi P. , Raiszadeh R. , Shahverdi H. R.

Identyfikatory

DOI

10.24425/amm.2020.132790

• Języki publikacji: EN

Abstrakty

EN

In this investigation the surface of an aluminized sample of plain carbon steel was melted and alloyed using a tingsten inert gas (TIG) welding process to produce iron-aluminide intermetallic phases on the surface. The produced coating was then characterized by SEM and EDS and its high-temperature properties in O₂ + 1%SO₂ gas were examined. The results showed that the Fe₃ Al coating produced could protect the substrate as it was subjected to the corroding gases at 700°C due to the formation of an alumina layer between the substrate and an outer layer of Fe₂ O₃ . At 900°C, the coating could only protect the substrate for 64 h. The lack of further protection at this temperature is attributed to the decrease in the protective properties of alumina with an increase in its temperature and the lack of presence of enough Al atoms in the coating for the repair of the defects formed in the alumina layer.

Słowa kluczowe

EN

iron aluminide; high temperature corrosion; plain carbon steel

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2020
• Tom: Vol. 65, iss. 2
• Strony: 529--538
• Opis fizyczny: Bibliogr. 31 poz., fot., rys., tab.

Twórcy

autor

Omranian-Mohammadi P.

• Hahid Bahonar University of Kerman, Faculty of Engineering, Department of Metallurgy and Materials Science, Kerman, Iran

autor

Raiszadeh R.

• Hahid Bahonar University of Kerman, Faculty of Engineering, Department of Metallurgy and Materials Science, Kerman, Iran

autor

Shahverdi H. R.

• Tarbiat Modares University, Faculty of Engineering, Materials Science and Engineering Department, Jalal Ale Ahmad Highway, 14115-111 Tehran, Iran

Bibliografia

• [1] P. Fan, E. Riddle, Z. Z. Fang, H. Y. Sohn, Surf. Coat. Technol. 202, 6090-6094 (2008).
• [2] M. Emami, H. R. Shahverdi, S. Hayashi, M. J. Torkamany, Metall. Mater. Trans. A 44, 3176-3184 (2013).
• [3] W. J. Cheng, C. J. Wang, Mater. Charact. 69, 63-70 (2012).
• [4] S. F. Corbin, E. Toyserkani, A. Khajepour, Mater. Sci. Eng. A 354, 48-57 (2003).
• [5] Y. Zhang, B. A. Pint, G. W. Garner, K. M. Cooley, J. A. Haynes, Surface and Coatings Technology, 188-189, 35-40 (2004).
• [6] Y. Zhang, B. A. Pint, K. M. Cooley, J. A. Haynes, Surf. Coat. Technol. 200, 1231-1235 (2005).
• [7] M. Emami, S. M. M. Hadavi, S. Hayashi, H. R. Shahverdi, Oxid. Met. 80, 437-451(2013).
• [8] N. I. Jamnapara, S. Frangini, J. Alphonsa, N. L. Chauhan, S. Mukherjee, Surf. Coat. Technol. 266, 146-150 (2015).
• [9] C. Christoglou, N. Voudouris, G. N. Angelopoulos, Surf. Coat. Technol. 155, 51-58 (2002).
• [10] Y. Q. Wang, Y. Zhang, D. A. Wilson, Surf. Coat. Technol. 204, 2737-2744 (2010).
• [11] M. H. Sohi, M. Ebrahimi, H. M. Ghasemi, A. Shahripour, Appl. Surf. Sci. 258, 7348-7353 (2012).
• [12] S. Buytoz, M. Ulutan, Surf. Coat. Technol. 200, 3698-3704 (2006).
• [13] P. Omranian Mohammadi, R. Raiszadeh, H. Shahverdi, Int. J. Adv. Manuf. Technol. 96, 1655-1663 (2018).
• [14] A. Amirsadeghi, M. H. Sohi, J. Mater. Process. Technol. 201, 673-677 (2008).
• [15] A. Amirsadeghi, M. H. Sohi, S. F. Bozorg, J. Iron. Steel Res. Int. 15, 86-94 (2008).
• [16] M. Eroğlu, N. Özdemir, Surf. Coat. Technol. 154, 209-217 (2002).
• [17] O. N. Çelik, M. Ulutan, H. Gaşan, Ü. Er, S. Buytoz, Surf. Coat. Technol. 206, 1423-1429 (2011).
• [18] A. S. Khanna, Introduction to high temperature oxidation and corrosion, 2002 ASM International.
• [19] P. Kofstad, R. Bredesen, Solid State Ionics. 52, 69-75 (1992).
• [20] W. H. Lee, R. Y. Lin, Mater. Chem. Phys. 58, 231-242 (1999).
• [21] V. S. Rao, R. G. Baligidad, V. S. Raja, Intermetallics. 10, 73-84 (2002).
• [22] W. F. Gale, T. C. Totemeier, Smithells metals reference book, 2003 Elsevier.
• [23] V. S. Rao, V. Raja, Intermetallics. 11, 119-128 (2003).
• [24] H. Bartar Esfahani, R. Raiszadeh, H. Doostmohammadi, Metall. Mater. Trans. A 47, 1331-1338 (2016).
• [25] F. Najafzadeh-Bakhtiarani, R. Raiszadeh. J. Mater. Sci. 46, 1305-1315 (2010).
• [26] R. Raiszadeh, W. D. Griffiths, Metall. Mater. Trans. B 42, 133-143 (2011).
• [27] O. Milton, Engineering Materials Science, 1995 San Diego: Academic Press.
• [28] N. B. Pilling, R. E. Bedsworth, J. Inst. Met. 29, 529-591(1923).
• [29] R. Y. Chen, W. Y. D. Yeun, Oxid. Met. 59, 433-468 (2003).
• [30] L. Yajiang, W. Juan, Y. Yansheng, M. Haijun, Bull. Mater. Sci. 28, 69-74 (2005).
• [31] W. C. Sleppy, J. Electrochem. Soc. 108, 1097-1102 (1961).

Uwagi

PL

Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2020).