Material Factors in Relation to Development Time in Liquid-Penetrant Inspection. Part 2. Investigation Programme and Preliminary Tests

• Autorzy: Irek P. , Słania J.

Identyfikatory

DOI

10.1515/amm-2016-0276

• Języki publikacji: EN

Abstrakty

EN

The paper is the continuation of the previous one entitled “Material factors in relation to development time in liquid-penetrant inspection. Part 1. Material factors” in which the material factors influencing essentially the development time in penetrant testing have been marked out. These are: type of material, surface roughness and imperfection width. In the paper it has been described how to prepare the factorial plan which will enable to test every factor with taking into account its different values. Moreover, it has been presented investigations on natural cracks, their width and roughness profile what will allow to assign suitable values of independent variables to the factorial plan. The purpose of the plan prepared in such a way will be the determination of the influence of the material kind, surface roughness and discontinuity width on the development time in penetrant testing.

Słowa kluczowe

EN

imperfection; defect; penetration testing; adhesion

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2016
• Tom: Vol. 61, iss. 3
• Strony: 1697--1708
• Opis fizyczny: Bibliogr. 16 poz., rys., schem., tab., wykr., wzory

Twórcy

autor

Irek P.

• Institute of Welding, Poland, 16-18 Bł. Czesława Str., 44-100 Gliwice, Poland

autor

Słania J.

• Institute of Welding, Poland, 16-18 Bł. Czesława Str., 44-100 Gliwice, Poland

Bibliografia

• [1] FDA, Pharmaceutical CGMPs For the 21st Century – A Risk-Based Approach, Final Report, 2004.
• [2] FDA, Guidance for Industry PAT – A Framework for Innovative Pharmaceutical Development, Manufacturing and Quality Assurance, 2004.
• [3] ICH, Q8 – Pharmaceutical Development, 2005.
• [4] Ch. D. Hendrix, What every technologist should know about experimental design, CHEMTECH, March, 1979.
• [5] W. Tarasiuk, B. Szczucka-Lasota, J. Piwnik, W. Majewski:, Tribological Properties of Super Field Weld with Micro-Jet Process. Advanced Materials Research 1036, 452-457 (2014).
• [6] R. Burdzik, Ł. Konieczny, Application of vibroacoustic methods for monitoring and control of comfort and safety of passenger cars. Solid State Phenomena 210, 20-25. (2014).
• [1] Ł. Konieczny, R. Burdzik,., B. łazarz, Application of the vibration test in the evaluation of the technical condition of shock absorbers built into the vehicle. Journal of Vibroengineering 15,, 4, 2042-2048 (2013).
• [1] T. Węgrzyn, The Influence of Nickel and Nitrogen on Impact Toughness Properties of Low Alloy Basic Electrode Steel Deposits. Conference of International Society of Offshore and Polar Engineers ISOPE´2001, Stavanger, Norway 2001, Copyright by International Society of Offshore and Polar Engineers 4,, 282-285, USA 2001,
• [1] T. Węgrzyn, The Classification of Metal Weld Deposits in Terms of the Amount of Nitrogen. Conference of International Society of Offshore and Polar Engineers ISOPE´2000, Seattle, USA 2000, Copyright by International Society of Offshore and Polar Engineers 4, Cupertino – California –130-134, USA 2000.
• [2] A. Lisiecki, Diode laser welding of high yield steel. Proceedings of SPIE, Laser Technology, Applications of Lasers 8703, 22 (2012).
• [3] A. Lisiecki, Welding of titanium alloy by Disk laser. Proceedings of SPIE, Laser Technology, Applications of Lasers, 87030 (2013).
• [4] T. Węgrzyn, J. Piwnik, R. Wieszała, D. Hadryś: Control over the steel welding structure parameters by micro-jet cooling, Archives of Metallurgy and Materials 57, 3, 679-685 (2012).
• [5] L. Kolarik, K. Kovanda, M. Valova, P. Vondrous, J. Dunkovsky, Weldability test of precipitation hardenable aluminium alloy EN AW 6082 T6”, Czech Technical University, Prague 2011.
• [6] Norma PN-EN 573-1:2006: Aluminium i stopy aluminium. Skład chemiczny i rodzaje wyrobów przerobionych plastycznie. Część 1: System oznaczeń numerycznych. (PN-EN 573-1:2006 Standard: Aluminium and its alloys. Chemical composition and types of plastically worked products. Part 1: Numerical denotations system.)
• [7] http://www.thyssenkrupp-vdm.com/fileadmin/Downloads/Datenblaetter/de/Nickel_99_2_d.pdf
• [8] Norma PN-EN 1011-4:2002/A1:2005: Spawanie. Wytyczne dotyczące spawania metali. Część 4: Spawanie łukowe aluminium i stopów aluminium. (PN-EN 1011-4:2002/A1:2005 Standard: Welding. Guidelines for welding of metals. Part 4: Arc welding of aluminium and its alloys.