Tytuł artykułu
Autorzy
Wybrane pełne teksty z tego czasopisma
Identyfikatory
Warianty tytułu
Języki publikacji
Abstrakty
In this paper a high accuracy position control strategy for a pneumatic actuation system subjected to a varying external force is proposed. A novel approach for the mathematical modeling of the pneumatic actuator, based on energy methods, is presented. The Lagrangian is derived from combining the kinetic and potential energies, leading to formulation of the Euler-Lagrange equation of motion. The nonlinear backstepping method is applied to derive the control law, and the derivative of the potential energy is used as the controlled parameter. Experimental results show that tracking a sine wave of 0.1m magnitude produces a maximum error of ±0:008m while the actuator is subjected to a time varying external force with a magnitude ranging from 570N to 1150N.
Czasopismo
Rocznik
Tom
Strony
1157--1174
Opis fizyczny
Bibliogr. 16 poz., 1 fot. kolor., rys., wykr.
Twórcy
autor
- Department of Mechanical Engineering, Ben-Gurion University of the Negev, Beer-Sheva, Israel
autor
- Department of Mechanical Engineering, Ben-Gurion University of the Negev, Beer-Sheva, Israel
autor
- Department of Mechanical Engineering, Ben-Gurion University of the Negev, Beer-Sheva, Israel
autor
- Department of Industrial and Management Engineering, Ben-Gurion University of the Negev, Beer-Sheva, Israel
Bibliografia
- [1] Shearer, J.L.: Continuous control of motion with compressed air, Ph.D. Thesis, Massachusetts Institute of Technology, 1954.
- [2] Richer, E. and Hurmuzlu, Y.: A high performance pneumatic force actuator system: Part II - Nonlinear controller design, Journal of Dynamic Systems, Measurement, and Control, 122, 426-434, 2000.
- [3] Liu, S. and Bobrow, J.E.: An Analysis of a Pneumatic Servo System and Its Application to a Computer-Controlled Robot, Journal of Dynamic Systems, Measurement, and Control, 110, 228-235, 1988.
- [4] Lai, J.Y., Menq, C.H. and Singh, R.: Accurate position control of a pneumatic actuator, Journal of Dynamic Systems, Measurement, and Control, 112, 734-739, 1990.
- [5] Ben-Dov, D. and Salcudean, S.E.: A force-controlled pneumatic actuator, IEEE Trans. Robot. and Autom., 11(6), 906-911, 1995.
- [6] Rao, Z. and Bone, G.M.: Modeling and control of a miniature servo pneumatic actuator, in: Proc. 2006 IEEE Robotics and Automation Conf., Orlando, FL, USA, 1806-1811, 2006.
- [7] Smaoui, M. and Brun, X. and Thomasset, D.: A study on tracking position control of an electropneumatic system using backstepping design, Control Engineering Practice, 14, 923-933, 2006.
- [8] Hodgson, S. et al.: Sliding-mode control of nonlinear discrete-input pneumatic actuators, in: 2011 IEEE/RSJ Int. Conf. Intelligent Robots and Systems, San Francisco, CA, USA, 738-743, 2011.
- [9] Shtessel, Y. and Taleb, M. and Plestan, F.: A novel adaptive-gain supertwisting sliding mode controller: Methodology and application, Automatica, 48, 759-769, 2012.
- [10] Taleb, M. and Levant, A. and Plestan, F.: Pneumatic actuator control: Solution based on adaptive twisting and experimentation, Control Engineering Practice, 21, 727-736, 2013.
- [11] Lu, C.H. and Huang, Y.R. and Shen, Y.T.: Backstepping sliding-mode control for a pneumatic control system, in: Proc. Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 224, 763-770, 2010.
- [12] Elleuch, D. and Damak, T.: Backstepping sliding mode controller coupled to adaptive sliding mode observer for interconnected fractional nonlinear system, Int. J. Recent Advances in Telecommunications, Signals and Systems, 75, 130-138, 2013.
- [13] Osuka, K. and Kimura, T. and Ono, T.: H-infinity control of a certain nonlinear actuator, in: Proc. 29th IEEE Conf. Decision and Control, Honolulu, HI, USA, 370-371, 1990.
- [14] Jeltsema, D. and Scherpen, J.M.A.: Multidomain modeling of nonlinear networks and systems, IEEE Control Syst. Mag., 29, 28-59, 2009.
- [15] Khalil and Hassan K.: Nonlinear Systems, 3rd ed., Prentice-Hall, New Jersey, 2002.
- [16] Beater, P.: Pneumatic Drives, Springer, Berlin, 2007.
Uwagi
Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2019).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-1e2ec703-c002-4061-b209-ddcecdcfbbb8