Computational method for shaping the vibro-isolation properties of semi-active and active systems

• Autorzy: Krzyżyński T. , Maciejewski I.

Identyfikatory

DOI

10.24423/aom.3098

• Konferencja: Solid Mechanics Conference (SolMech 2018) (41 ; 27–31.08. 2018 ; Warsaw, Poland)
• Języki publikacji: EN

Abstrakty

EN

The paper deals with an original methodology for modelling and control system design of the semi-active and active systems. At first a generalised simulation model of the vibration reduction system is formulated in such a way that it represents the dynamics of human body exposed to mechanical vibration. Then a novel control system design is proposed in order to adjust force characteristics of the fundamental elements included in the suspension system and consequently to reduce the harmful effects of vibration. Finally, a computational method is experimentally verified by selecting the vibro-isolation properties of an exemplary horizontal seat suspension for a specific input vibration.

Słowa kluczowe

EN

vibration exposure; whole-body vibration

• Wydawca: Instytut Podstawowych Problemów Techniki PAN
• Czasopismo: Archives of Mechanics
• Rocznik: 2019
• Tom: Vol. 71, nr 4-5
• Strony: 291--313
• Opis fizyczny: Bibliogr. 24 poz.

Twórcy

autor

Krzyżyński T.

• Department of Mechatronics and Applied Mechanics, Faculty of Technology and Education, Koszalin University of Technology, Śniadeckich 2, 75-453 Koszalin, Poland

autor

Maciejewski I.

• Department of Mechatronics and Applied Mechanics, Facultyof Technology and Education, Koszalin University of Technology, Śniadeckich 2, 75-453 Koszalin, Poland

Bibliografia

• 1. I. Maciejewski, L. Meyer, T. Krzyzynski, Modelling and multi-criteria optimization of passive seat suspension vibro-isolating properties, Journal of Sound and Vibration, 324, 520–538, 2009, 10.1016/j.jsv.2009.02.021.
• 2. R.A. Ibrahim, Recent advances in nonlinear passive vibration isolators, Journal of Sound and Vibration, 314, 371–452, 2008, 10.1016/j.jsv.2008.01.014.
• 3. B. Yan, M.J. Brennan, S.J. Elliott, N.S. Ferguson, Active vibration isolation of a system with a distributed parameter isolator using absolute velocity feedback control, Journal of Sound and Vibration, 329, 1601–1614, 2010, 10.1016/j.jsv.2009.11.023.
• 4. T.S. Morais, J. Hagopian, V. Steffen, J. Mahfoud, Modeling and identification of electromagnetic actuator for the control of rotating machinery, Shock and Vibration, 20, 171–179, 2013, 10.3233/SAV-2012-0735.
• 5. P.V.S. Sobhan, M.S. Rao, M.V. Sudarsan, D.M. Swamy, Higher order sliding mode control of electromagnetic suspension system, International Journal of Control Theory and Applications, 10, 139–147, 2017.
• 6. G. Zhang, Y. Zhang, F. Yu, Active suspension robust control based on main/torque-tracking loop structure, Journal of Vibration and Control 19, 1123–113, 2012, 10.1177/1077546312441656.
• 7. X. Su, X. Yang , P. Shi, L. Wu, Fuzzy control of nonlinear electromagnetic suspension systems, Mechatronics, 24, 328–335, 2014, 10.1016/j.mechatronics.2013.08.002.
• 8. P. Hui, Ch. Ying, J.N. Chen, X. Liu, Design of LQG controller for active suspension without considering road input signals, Shock and Vibration, Article ID 6573567, 1–13, 2017, 10.1155/2017/6573567.
• 9. H. Du, N. Zhang, H-inf control of active vehicle suspensions with actuator time delay, Journal of Sound and Vibration, 301, 236–252, 2007, 10.1016/j.jsv.2006.09.022.
• 10. M. Gudarzi, A. Oveisi, Robust control for ride comfort improvement of an active suspension system considering uncertain driver’s biodynamics, Journal of Low Frequency Noise, Vibration and Active Control, 33, 317–339, 2014, 10.1260/0263-0923.33.3.317.
• 11. M. Maslanka, B. Sapinski, J. Snamina, Experimental study of vibration control of a cable with an attached MR damper, Journal of Theoretical and Applied Mechanics, 45, 893–917, 2007.
• 12. S. Rutzel, B. Hinz, H.B. Wolfel, Modal description – A better way of characterizing human vibration behavior, Journal of Sound and Vibration, 298, 810–823, 2006, 10.1016/j.jsv.2006.06.019.
• 13. G.J. Stein, P. Mucka, R. Chmurny, B. Hinz, R. Bluthner, Measurement and modelling of x-direction apparent mass of the seated human body - cushioned seat system, Journal of Biomechanics, 40, 1493–1503, 2007, 10.1016/j.jbiomech.2006.06.012.
• 14. M. Toward, J. Griffin, The transmission of vertical vibration through seats: Influence of the characteristics of the human body, Journal of Sound and Vibration, 330, 6526–6543, 2011, 10.1016/j.jsv.2011.07.033.
• 15. S. Yildirim, Vibration control of suspension systems using a proposed neural network, Journal of Sound and Vibration, 277, 1059–1069, 2004, 10.1016/j.jsv.2003.09.057.
• 16. T. Yoshimura, K. Nakaminami, M. Kurimoto, J. Hino, Active suspension of passenger cars using linear and fuzzy-logic controls, Control Engineering Practice, 7, 41–47, 1999, 10.1016/S0967-0661(98)00145-2.
• 17. D. Gu, P. Petkov, M. Konstantinov, Robust Control Design with MATLAB, Springer, Berlin, 2005, 10.1007/978-1-4471-4682-7.
• 18. G. Paddan, M. Griffi, Use of Seating to Control Exposures to Whole-body Vibration, Health and Safety Executive, London, 2001.
• 19. International Organization for Standardization, Mechanical Vibration and Shock – Evolution of Human Exposure to Whole Body Vibration, ISO 2631, Genewa, 1997.
• 20. A. Preumont, Vibration Control of Active Structures An Introduction, Springer, Berlin Heidelberg, 2011, 10.1007/978-94-007-2033-6.
• 21. I. Maciejewski, T. Kiczkowiak, T. Krzyzynski, Application of the Pareto-optimal approach for selecting dynamic characteristics of seat suspension systems, Vehicle System Dynamics, 49, 1929–1950, 2011, 10.1080/00423114.2011.560270.
• 22. I. Maciejewski, S. Pecolt, Krzyzynski T, W. Markiewicz, Controlling the vibration of a seat suspension system with the use of a magneto-rheological damper, The Archives of Automotive Engineering, 77, 59–69, 2017, 10.14669/AM.VOL77.ART6.
• 23. I. Maciejewski, T. Krzyzynski, H. Meyer, Modeling and vibration control of an active horizontal seat suspension with pneumatic muscles, Journal of Vibration and Control, Online First, 1–13, 2018, 10.1177/1077546318763435.
• 24. P. Clement, Laboratory test protocol for assessing the vibration performance of seats equipped with horizontal suspensions, Technical Report for the Competitive and Sustainable Growth Programme VIBSEAT G3RD-CT-2002-00827, 4, 1–26, 2005.

Uwagi

PL

Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2019).