Analysis of influence of temperature on wellbore tubing dimensions

• Autorzy: Kwietniewski M. , Miedzińska D. , Niezgoda T. , Małek E.

Identyfikatory

DOI

10.5604/12314005.1217215

• Języki publikacji: EN

Abstrakty

EN

The construction of exploitation wellbore is complex, it consists of several columns of pipelines which perform different tasks. It is very important to preclude flow of reservoir fluid between wellbore and ground. Tubing is a kind of a pipeline which is very important element of oil and gas wellbore construction. It allows to transport fracturing medium between wellbore station and underground deposit. Manufacture quality and correct mounting of tubing in the wellbore are the key for effective exploitation. However, during work those pipes are subjected to changeable loads which results in temperature value changes for example. That temperature variations can be caused by cold medium transport inside the pipe. In the paper, analyses of influence of temperature value changes on the tubing shrinkage were presented. Numerical analyses of section of pipe vertically located in the wellbore and loaded with changeable temperature were carried out. The calculations were made with the use of coupled structural and thermal analyses. Received results of tubing shrinkage for fragment of pipe were adapted to the column of pipes of 3000 m length. Results of numerical analyses were verified with the analytical calculations. Material of tubing was assumed as steel P110 which is often applied in the wellbore construction.

Słowa kluczowe

EN

wellbore; tubing; heat; thermal extension; pipe; steel P110; thermal analyses; finite element method

• Wydawca: Łukasiewicz Research Network - Institute of Aviation ; European Science Society of Powertrain and Transport KONES Poland ; Wydawnictwo Instytutu Technicznego Wojsk Lotniczych
• Czasopismo: Journal of KONES
• Rocznik: 2016
• Tom: Vol. 23, No. 4
• Strony: 269--273
• Opis fizyczny: Bibliogr. 6 poz., rys.

Twórcy

autor

Kwietniewski M.

• Military University of Technology Department of Mechanics and Applied Computer Science Gen. Sylwestra Kaliskiego Street 2, 00-908 Warsaw, Poland tel.: [phone], fax: [phone]

autor

Miedzińska D.

• Military University of Technology Department of Mechanics and Applied Computer Science Gen. Sylwestra Kaliskiego Street 2, 00-908 Warsaw, Poland tel.: [phone], fax: [phone]

autor

Niezgoda T.

• Military University of Technology Department of Mechanics and Applied Computer Science Gen. Sylwestra Kaliskiego Street 2, 00-908 Warsaw, Poland tel.: [phone], fax: [phone]

autor

Małek E.

• Military University of Technology Department of Mechanics and Applied Computer Science Gen. Sylwestra Kaliskiego Street 2, 00-908 Warsaw, Poland tel.: [phone], fax: [phone]

Bibliografia

• [1] Wójcikowski, A., Przygotowywanie otworów do wiercenia 311[40].Z1.04, Institute For Sustainable Technologies – International Research Institute, Radom 2007.
• [2] ISO 11960:2011 Petroleum and natural gas industries — 5CT Steel pipes for use as casing or tubing for wells, American Petroleum Institute (API), 9th Edition, June 2011.
• [3] Liu, Z. Y., Li, H., Jia, Z. J., Du, C. W., Li, X. G., Failure analysis of P110 steel tubing in low-temperature annular environment of CO2 flooding wells, Engineering Failure Analysis, Vol. 60, pp. 296-306, www.propublica.org/article/anatomy-of-a-gas-well-426, access, 03.2016.
• [4] Massalski, J., Massalska, M., Fizyka dla inżynierów, cz. I, WNT, Warszawa 2013.
• [5] Szczeniowski, S., Fizyka doświadczalna, cz. I, PWN, Warszawa 1953.
• [6] Pipe Body Performance Properties Catalogue, Tenaris, 2011.

Uwagi

PL

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę.