A research stand for measuring friction parameters in a belt transmission

• Autorzy: Kubas K.

Identyfikatory

DOI

10.14669/AM.VOL75. ART4

• Języki publikacji: EN

Abstrakty

EN

In this paper it has been presented a research stand that allows to measure static and dynamic friction parameters between the belt and the pulley in a belt transmission. The stand can be rebuilt to three configurations to measure: static friction, the so-called kinetic and dynamic friction characteristics as well as complete belt transmission. It can measure friction parameters of any belts transmissions occurring in cars: flat belts, V-belts or poly-V belts, except toothed belts. In the stand there are build-in torque and force sensors – to measure engine torque and tension of the belt, and rotation and displacement sensors measuring angular velocities of the pulleys and displacement of the slack part of the belt. Finally, some sample results of poly-V belt 5pk, achieved from the research stand are presented.

Słowa kluczowe

EN

friction; research stand; belt transmission

PL

tarcie; stanowisko badawcze; pas transmisyjny

• Wydawca: Wydawnictwo Naukowe Sieci Badawczej Łukasiewicz - Przemysłowego Instytutu Motoryzacji
• Czasopismo: Archiwum Motoryzacji
• Rocznik: 2017
• Tom: Vol. 75, nr 1
• Strony: 69--83
• Opis fizyczny: Bibliogr. 18 poz., rys., tab.

Twórcy

autor

Kubas K.

• University of Bielsko-Biała, Faculty of Mechanical Engineering and Computer Science, Department of Mechanics, ul. Willowa 2, 43-309 Bielsko-Biała, Poland

Bibliografia

• [1] Balta B, Sonmez F O, Cengiz A. Speed losses in V-ribbed belt drives. Mechanism and Machine Theory. 2015; 86: 1-14.
• [2] Chen G (S), Lee J H, Narravula V, Kitchin T. Friction and noise of rubber belt in low temperature condition. The influence of interfacial ice film. Cold Regions Science and Technology. 2012; 71: 95-101.
• [3] Cruz Gomez M A, Gallardo-Hernandez E A, Vite Torres M, Peña Bantista A. Rubber steel friction in contaminated contacts. Wear. 2013; 302: 1421-1425.
• [4] Čepon G, Manin L, Boltežar M. Experimental identification of the contact parameters between a V-ribbed belt and a pulley. Mechanism and Machine Theory. 2010; 45: 1424-1433
• [5] Čepon G, Manin L, Boltežar M. Introduction of damping into the flexible multibody belt-drive model: A numerical and experimental investigation. Journal of Sound and Vibration. 2009; 324: 283-296.
• [6] Čepon G, Boltežar M. Dynamics of a belt-drive system using a linear complementarity problem for the beltpulley contact description. Journal of Sound and Vibration. 2009; 319: 1019-1035.
• [7] Euler M L. Remarques sur l’effect du frottement dans l’equilibre. Mém. Acad. Sci., Berlin. 1762: 265-278.
• [8] Fawcett J N. Chain and belt drives – a review. Shock Vibrations Digest. 1981; 13(5): 5-12.
• [9] Julio G, Plante J-S. An experimentally-validated model of rubber-belt CVT mechanics. Mechanism and Machine Theory. 2011; 46: 1037-1053.
• [10] Kim D, Leamy M J, Ferri A A. Dynamic Modeling and Stability Analysis of Flat Belt Drives Using an Elastic/Perfectly Plastic Friction Law. ASME Journal of Dynamic Systems. Measurement and Control. 2011; 133: 1-10.
• [11] Kubas K. A two-dimensional discrete model for dynamic analysis of belt transmission with dry friction. The Archive of Mechanical Engineering. 2014; 61(4): 571–593.
• [12] Leamy M J, Wasfy T M. Analysis of belt-drive mechanics using a creep-rate-dependent friction law. Journal of Applied Mechanics. Trans. of ASME. 2002; 69: 763-771.
• [13] Leamy M J, Wasfy T M. Transient and Steady-State Dynamic Finite Element Modeling of Belt-Drives. ASME Journal of Dynamic Systems, Measurement and Control. 2002; 124: 575-581.
• [14] Mofidi M, Kassfeldt E, Prakash B. Tribological behaviour of an elastomer aged in different oils, Tribology International. 2008; 41: 860-866.
• [15] Sheng G, Miller L D, Brown L, Otremba J. Wet belt friction-induced dynamic instability and noise in automotive accessory belt drive systems. International Journal of Vehicle Noise and Vibration 2–3. 2006; 249.
• [16] Szlachetko T, Paulsson R. Poprawa sprawności i niezawodności pracy napędów/przekładni pasowych. Diagnostyka. 2004; 2(30): 121-124.
• [17] Ulatowski K. Przyczyny awarii pasów klinowych i zębatych. Magazyn Przemysłowy. 2013; 129(7-8).
• [18] Research stand documentation.