Strength calculations of an element compensating circumferential backlash in the external gear pump

• Autorzy: Osiński P. , Chruścielski G.

Identyfikatory

DOI

10.15632/jtam-pl.54.1.251

• Języki publikacji: EN

Abstrakty

EN

The aim of the article is to discuss the issue of strength of the circumferential backlash compensating beam in a high-efficiency gear pump. Three geometric versions of the compensating beam structure differing in the wrapping angle are analyzed. The mechanical model is solved assuming the curved beam model supported at the contact points between the beam and the gear teeth. The assumed mechanical structure is statically indeterminate. In order to determine the reactions in the supports and in the beam fixing, the Menabrei and Castigliano theorems are used. Based on analytical calculation results, the cause of compensation structure damage during experimental tests of prototype units is identified and the most favorable variant of beam structure, from the mechanical strength point of view, is determined.

Słowa kluczowe

EN

external gear pump; strength calculation; circumferential backlash compensation

• Wydawca: Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
• Czasopismo: Journal of Theoretical and Applied Mechanics
• Rocznik: 2016
• Tom: Vol. 54 nr 1
• Strony: 251--262
• Opis fizyczny: Bibliogr. 20 poz., rys., tab.

Twórcy

autor

Osiński P.

• Wroclaw University of Technology, Faculty of Mechanical Engineering, Wrocław, Poland

autor

Chruścielski G.

• Wroclaw University of Technology, Faculty of Mechanical Engineering, Wrocław, Poland

Bibliografia

• 1. Chrobot M., Łabik M., Siudy B., Wieczorek K., 1997, Hydraulic optimization of axial backlash compensation (in Polish), Report Series Report, No. S-019/97
• 2. Dyląg Z., Jakubowicz A., Orłoś Z., 1999, Strength of Materials (in Polish), Vol. I/II, WNT, Warsaw
• 3. Judin E.M., 1958, Gear Pumps (in Polish), PWT, Warsaw
• 4. Kollek W., 2004, Fundamental of the Design of Hydraulic Drives and Controls (in Polish), Wrocław University of Technology Publishing House, Wrocław
• 5. Kollek W., 1996, Gear Pumps – Design and Operation (in Polish), Ossolineum, Wrocław
• 6. Kollek W., Radziwanowska U., 2015, Energetic efficiency of gear micropumps, Archives of Civil and Mechanical Engineering, 15, 1, 109-115
• 7. Niezgodziński M. E., Niezgodziński T., 1996, Strength of Materials (in Polish), PWN, Warsaw
• 8. Osiński P., 2012a, An external gear pump (in Polish), Patent application No. P398436, Warsaw
• 9. Osiński P., 2012b, An external gear pump (in Polish), Patent application No. P398437, Warsaw
• 10. Osiński P., 2013, High-Pressure and Low-Fluctuation Internal Gear Pumps (in Polish) Wrocław University of Technology Publishing House, Wrocław
• 11. Osiński P., Deptuła A., Partyka M.A., 2013, Discrete optimization of a gear pump after tooth root undercutting by means of multi-valued logic trees, Archives of Civil and Mechanical Engineering, 13, 4, 422-431, http://dx.doi.org/10.1016/j.acme.2013.05.001
• 12. Osiński P., Kania A., Kollek W., Wiczkowski E., 2012, An external gear pump (in Polish), Patent application No. P397539, Warsaw
• 13. Osiński P., Kollek W., 2007, Modelling and Design of Gear Pumps, Wrocław University of Technology Publishing House, Wrocław
• 14. Ragunathan C., Manoharan C., 2012, Dynamic analysis of hydrodynamic gear pump performance using design of experiment stand operational parameters, IOSR Journal of Mechanical and Civil Engineering, 1, 6, 17–23
• 15. Singal R.K., Singal M., Singal R., 2009, Hydraulic Machines. Fluid Machinery, I.K. International Publishing House, New Delhi
• 16. Stryczek S., 1995, Hydrostatic Drives (in Polish), Vol. I, II. WNT, Warsaw
• 17. Vacca A., Guidetti M., 2011, Modelling and experimental validation of external spur gear machines for fluid power applications, Simulation Modelling Practice and Theory, 19, 2007-2031
• 18. Wang S., Sakurai H., Kasarekar A., 2011, The optimal design in external gear pumps and motors, ASME Transactions on Mechatronics, 16, 5.
• 19. Wiczkowski E., 2012, An external gear pump (in Polish), Patent application No. P397540, Warsaw
• 20. Zakrzewski M., Zawadzki J., 1983, Strength of Materials (in Polish), PWN, Warsaw

Uwagi

PL

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniajacą naukę.