Influence of Titanium on Crystallization and Wear Resistance of High Chromium Cast Iron

• Autorzy: Studnicki A. , Dojka R. , Gromczyk M. , Kondracki M.

Identyfikatory

DOI

10.1515/afe-2016-0014

• Języki publikacji: EN

Abstrakty

EN

Paper presents the results of studies on primary crystallization and wear resistance of high chromium cast iron inoculated with ferrotitanium intended for work in abrasive conditions. Primary crystallization was examined with use of TDA method, wear tests of the samples were conducted using the modified pin-on-disk method.

Słowa kluczowe

EN

chromium cast iron; primary crystallization; inoculation; titanium; wear

PL

żeliwo chromowe; krystalizacja; wszczepienia; tytan; zużycie

• Wydawca: Komisja Odlewnictwa Polskiej Akademii Nauk Oddział w Katowicach
• Czasopismo: Archives of Foundry Engineering
• Rocznik: 2016
• Tom: Vol. 16, iss. 1
• Strony: 117--123
• Opis fizyczny: Bibliogr. 10 poz., rys., tab., wykr.

Twórcy

autor

Studnicki A.

• Department of Foundry Engineering, Silesian University of Technology, Towarowa 7, 44-100 Gliwice, Poland

autor

Dojka R.

• Department of Foundry Engineering, Silesian University of Technology, Towarowa 7, 44-100 Gliwice, Poland

autor

Gromczyk M.

• Department of Foundry Engineering, Silesian University of Technology, Towarowa 7, 44-100 Gliwice, Poland

autor

Kondracki M.

• Department of Foundry Engineering, Silesian University of Technology, Towarowa 7, 44-100 Gliwice, Poland

Bibliografia

• [1] Sakwa, W., Jura, S., Sakwa, J. (1980). Wear resistance iron alloys. Part II Cast steel. Kraków: ZG STOP. (in Polish).
• [2] Fraś, E. (2003). Crystallization of metals. Warszawa: WNT. (in Polish).
• [3] Gromczyk, M., Kondracki, M., Studnicki, A. & Szajnar, J. (2015). Stereological Analysis of Carbides in Hypoeutectic Chromium Cast Iron. Archives of Foundry Engineering, Vol. 15, Issue 2. 17-22. Katowice-Gliwice: PAN.
• [4] Stawarz, M., Gromczyk, M., Kondracki, M. & Szajnar, J. (2014). Analysis of the Effect of Heat Removal from the Mould on the Crystallization of Cast Iron with High Si Content. Archives of Foundry Engineering, Vol. 14, Special Issue 4. 119 – 122 (in Polish).
• [5] Ma, Y., Li, X., Liu, Y., Zhou, S. & Dang, X. (2012). Effect of Ti-V-Nb-Mo addition on microstructure of high chromium cast iron. China Foundry, Vol.9, No 2.
• [6] Studnicki, A. (2013). Role of selected inoculants in crystallization of wear resistant high chromium cast iron. Monography. Katowice-Gliwice: Archives of Foundry Engineering. (in Polish).
• [7] Studnicki, A. & Jura, S. (1999). Identification of characteristic temperatures of solidification of high chromium cast iron. Solidification of metals and alloys, Vol. 1, No 40, 189-195. Katowice, Opole PAN.
• [8] Kopyciński, D., Guzik, E., Siekaniec, D. & Szczęsny, A. (2015). The effect of addition of titanium on the structure and properties of high chromium cast iron. Archives of Foundry Engineering, Vol. 16, issue 3. 43-46.
• [9] Kopyciński, D. & Piasny, S. (2012). Influence of tungsten and titanium on the structure of chromium cast iron. Archives of Foundry Engineering, Vol. 12, issue 1. 57–60.
• [10] Kopyciński, D. (2015). Development of structure and mechanical properties in cast iron for operation under harsh conditions. Archives of Foundry Engineering. Monograph. 1-182 (in Polish).

Uwagi

PL

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę.