CPC power theory for analysis of arc furnaces

• Autorzy: Martell F. , Izaguirre A. , Macias M.

Identyfikatory

DOI

10.15199/48.2016.06.28

Warianty tytułu

PL

Wykorzystanie teorii CPC do analizy pieców łukowych

• Języki publikacji: EN

Abstrakty

EN

Electric Arc Furnaces (EAFs) are facilities with an intensive use of energy where small improvements in their control imply significant electrical energy savings. The electric arcs are highly nonlinear and chaotic; a power theory for non-sinusoidal voltages and currents is needed for the analysis of the EAFs. The Current´s Physicals Components (CPC) power theory allows an advanced engineering analysis of the energy transfer at arc furnaces since each one of the current components can be used as performance indicators to improve EAFs power control.

PL

Piece łukowe są bardzo nieliniowe i chaotyczne dlatego są bardzo trudne do analizy. Wykorzystanie teorii CPC (Current Physical Components) umożliwia bardziej dokładną analizę przenoszenia energii i poprawę sterowania mocą.

Słowa kluczowe

EN

electric arc furnace; power control; CPC power theory

PL

piec łukowy; teoria CPC; sterowanie mocą

• Wydawca: Wydawnictwo SIGMA-NOT
• Czasopismo: Przegląd Elektrotechniczny
• Rocznik: 2016
• Tom: R. 92, nr 6
• Strony: 138--142
• Opis fizyczny: Bibliogr. 12 poz., rys., wykr.

Twórcy

autor

Martell F.

• Tecnologico de Monterrey, Campus Aguascalientes

autor

Izaguirre A.

• Tecnologico de Monterrey, Campus Aguascalientes

autor

Macias M.

• Tecnologico de Monterrey, Campus Aguascalientes

Bibliografia

• [1] Muhlbauer A., Von Starck A. and Kramer C., Handbook of Thermoprocessing Technologies: Fundamentals - Processes - Components - Safety, Vulkan-Verlag GmbH, 2005
• [2] Toulouevski Y. and Ziburov I., “Innovation in Electric Arc Furnaces”, Springer-Verlag Berlín, 2009.
• [3] Bowman B. and Krüger K., “Arc Furnace Physics”, Verlag Stahleisen, Düsseldorf, 2009.
• [4] Dittmer B. and Krüger K., “Theoretical approach to modeling thermal radiation in electric arc furnaces”, Electro-Heat International, Vol. 4, (2009), pp. 195.
• [5] Beites, L. F., Mayordomo, J. G., Hernandes, A. and Asensi, R. (2001). Harmonics, Interharmonic, unbalances of arc furnaces:a new frequency domain approach, IEEE Transactions on Power Delivery, 16(4), 2001, 661-66
• [6] Miller T.E., “Reactive Power Control in Electric Systems”, Wiley, Hoboken, NJ, 1982.
• [7] Martell F., Deschamps A., Mendoza R., Meléndez M., Llamas A. and Micheloud O., “Virtual Neutral to Ground Voltage as Stability Index for Electric Arc Furnaces”, ISIJ International, Vol. 51, No. 11, (2011), pp. 1846.
• [8] Czarnecki L., Currents’ Physical Components (CPC) in Circuits with Nonsinusoidal Voltages and Currents – Part 1: Single Phase Linear Circuits, Electric Power Quality and Utilization Journal, Vol. XI, No.2
• [9] Czarnecki L., Currents’ Physical Components (CPC) in Circuits with Nonsinusoidal Voltages and Currents – Part 2: Three- Phase Three Wire Linear Circuits, Electrical Power Quality and Utilization Journal Vol. XII, No.1, pp. 3-13
• [10] Czarnecki L.,, Currents’ Physical Components (CPC) concept: a fundamental of Power Theory, Przegląd Elektrotechniczny, R84, No. 6/2008, pp. 28-37.
• [11] Czarnecki L.S., Working, reflected and detrimental active powers, IET on Generation, Transmission and Distribution,(2012) Vol. 6, No. 3, pp. 233-239
• [12] Czarnecki L., Circuits with Semi-Periodic Currents: Main Features and Power Properties, ETEP Vol. 12, January/February

Uwagi

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę.