Thermal, mechanical and moisture properties of polimer plaster modified with lightweight fillers

• Autorzy: Marchewka Izabela , Downar-Zapolska Ewa , Pichór Waldemar
• Języki publikacji: EN

Abstrakty

EN

Thermally insulating lightweight plasters are urgently needed for the development of sustainable energy-saving buildings. The creation of such a material is possible because of the use of lightweight fillers, which are of interest to many researchers. As a result of their porous structure, it is possible to lower the density and thermal conductivity of various materials. The aim of this work is to analyze the influence of hollow glass microspheres in two granulations and expanded glass on the parameters of polymer plaster. Composites containing various amounts of lightweight fillers were prepared. Then, their parameters were compared in terms of the mechanical properties, thermal conductivity, vapor permeability, and water absorption. All three lightweight fillers successfully reduced the density of the polymer mass and improved plaster insulation. The best effect was achieved with both types of hollow glass microspheres. The weight of the polymer binder was reduced by up to 80%. In the case of expanded glass, the density was only reduced by 38%. At the same time, the composites were studied in terms of their mechanical and moisture properties. The specimens with the highest amount of lightweight filler showed significant deterioration in elasticity due to disturbance of the pigment:binder ratio. They cracked at lower deflection angles. By not exceeding 20% of the filler, no effect on flexibility was observed in any of the three investigated fillers. Interpretation of the research results indicates that the studied lightweight fillers allow a plaster mass to be obtained with an extremely low thermal conductivity coefficient, less than 0.086 W/mK. However, while ensuring the optimal proportion between fillers and polymer binder, it is possible to reduce the coefficient to 0.261 W/mK without noticeable deterioration of the mechanical properties.

Słowa kluczowe

EN

lightweight fillers; polymer plaster; thermal insulating; hollow glass microspheres; expanded glass

PL

lekki wypełniacz; tynk polimerowy; izolacyjność termiczna; mikrosfery szklane; szkło ekspandowane

• Wydawca: Polskie Towarzystwo Materiałów Kompozytowych
• Czasopismo: Composites Theory and Practice
• Rocznik: 2022
• Tom: R. 22, nr 3
• Strony: 160--165
• Opis fizyczny: Bibliogr. 24 poz., rys., tab.

Twórcy

autor

Marchewka Izabela

• Lakma SAT, Cieszyn, Poland

autor

Downar-Zapolska Ewa

• Lakma SAT, Cieszyn, Poland

autor

Pichór Waldemar

• AGH University of Science and Technology, Faculty of Materials Science and Ceramics, al. A. Mickiewicza 30, 30-059 Krakow, Poland

Bibliografia

• [1] Ong H.C., Mahlia T.M.I., Masjuki H.H., T.M.I., A review on energy scenario and sustainable energy in Malaysia, Renewable and Sustainable Energy Reviews 2011, January, 15, 1, 639-647, DOI: 10.1016/j.rser.2010.09.043.
• [2] Ozel M., Thermal performance and optimum insulation thnickness of building walls with different structure materials, Applied Thermal Engineering 2011, December, 31, 17, 3854-3863, DOI: 10.1016/j.applthermaleng.2011.07.033.
• [3] Aditya L., Mahlia T.M.I., Rismanchi B., Ng H.M., Hasan M.H., Metselaar H.S.C., Muraza O., Aditiya H.B., A review on insulation materials for energy conservation in buildings, Renewable and Sustainable Energy Reviews 2017, June, 73, 1352-1365, DOI: 10.1016/j.rser.2017.02.034.
• [4] AI-Homoud D.M.S., Performance characteristics and practical applications of common building thermal insulation materials, Building and Environment 2005, March, 40, 3, 353-366, DOI: 10.1016/j.buildenv.2004.05.013.
• [5] Hanif A., Lu Z., Cheng Y., Diao S., Effects of different lightweight functional fillers for use in cementitious composites, International Journal of Concrete Structures and Materials 2017, March, 11, 1, 99-113, DOI: 10.1007/s40069-016-0184-1.
• [6] Bumanis G., Bajare D., Korjakins A., Mechanical and thermal properties of lightweight concrete made from expanded glass, Journal of Sustainable Architecture and Civil Engineering 2013, June, 2, 3, 26-32, DOI: 10.5755/j01.sace.2.3.2790.
• [7] Chung S.Y., Han T.S., Kim S.Y., Kim J.H.J., Youm K.S., Lim J.H., Evaluation of effect of glass beads on thermal conductivity of insulating concrete using micro CT images and probability functions, Cement and Concrete Composites 2016, January, 65, 150-162, DOI: 10.1016/j.cemconcomp.2015.10.011.
• [8] Kramar D., Bindiganavile V., Mechanical properties and size effects in lightweight mortars containing expanded perlite aggregate, Materials and Structures 2010, September, 44, 4, 735-748, DOI: 10.1617/s11527-010-9662-0.
• [9] Sengul O., Azizi S., Karaosmanoglu F., Tasdemir M.A., Effect of expanded perlite on the mechanical properties and thermal conductivity of lightweight concrete, Energy and Buildings 2011, February-March, 43, 2-3, 671-676, DOI: 10.1016/j. enbuild.2010.11.008.
• [10] Sayadi A.A., Tapia J.V., Neitzert T.R., Clifton G.C., Effects of expanded polystyrene (EPS) particles on fire resistance, thermal conductivity and compressive strength of foamed concrete, Construction and Building Materials 2016, June, 112, 716-724, DOI: 10.1016/j.conbuildmat.2016.02.218.
• [11] Deveciog ̆lu A.G., Biçer Y., The effects of tragacanth addition on the thermal and mechanical properties of light-weight concretes mixed with expanded clay, Periodica Polytechnica Civil Engineering 2015, January, 60, 1, 45-50, DOI: 10.3311/ PPci.7984.
• [12] Gao T., Jelle B.P., Gustavsen A., Jacobsen S., Aerogel incorporated concrete: An experimental study, Construction and Building Materials 2014, February, 52, 130-136, DOI: 10.1016/j.conbuildmat.2013.10.100.
• [13] Hanif A., Diao S., Lu Z., Fan T., Li Z., Green lightweight cementitious composite incorporating aerogels and fly ash cenospheres – Mechanical and thermal insulating properties, Construction and Building Materials 2016, July, 116, 422-430, DOI: 10.1016/j.conbuildmat.2016.04.134.
• [14] Gao T., Jelle B.P., Sandberg L.I.C., Gustavsen A., Monodisperse hollow silica nanospheres for nano insulation materials: synthesis, characterization, and life cycle assessment, ASC Applied Materials & Interfaces 2013, January,5, 3, 761-767, DOI: 10.1021/am302303b.
• [15] Hanif A., Lu Z., Li Z., Utilization of fly ash cenosphere as lightweight filler in cement-based composites – A review, Construction and Building Materials 2017, July, 144, 373-384, DOI: 10.1016/j.conbuildmat.2017.03.188.
• [16] Topçu I.B., Uygunoǧlu T., Properties of autoclaved lightweight aggregate concrete, Building and Environment 2007, December, 42, 12, 4108-4116, DOI: 10.1016/j.buildenv.2006.11.024.
• [17] Yun T.S., Jeong Y.J., Han T.S., Youm K.S., Evaluation of thermal conductivity for thermally insulated concretes, Energy and Buildings 2013, June, 61, 125-32, DOI: 10.1016/j.enbuild.2013.01.043.
• [18] Zhuge Y., Shen C.J., Lu G.X., Hesse G., Chen S., Ruan D., Material properties and impact resistance of a new lightweight engineered cementitious composite, 23rd Australasian Conference on the Mechanics of Structures and Materials, Byron Bay, Australia, December 2014, ACMSM 23, 9-12.
• [19] Aslani F., Wang L., Development of strain‐hardening lightweight engineered cementitious composites using hollow glass microspheres, Structural Concrete 2019, June, 21, 20, 673-688, DOI: 10.1002/suco.201900096.
• [20] Aslani F., Wang L., Fabrication and characterization of an engineered cementitious composite with enhanced fire resistance performance, Journal of Cleaner Production 2019, June, 221, 202-214, DOI: 10.1016/j.jclepro.2019.02.241.
• [21] Kabay N., Kizilkanat A., Aktruk B., Kahraman Y., Light- weight cement-based composites incorporating hollow glass microspheres: Fresh and hardened state properties, Teknik Dergi 2022, January, 33, 1, 1-25, DOI: 10.18400/tekderg.677447.
• [22] https://poraver.com/us/poraver/
• [23] Yu R., Van Onna D.V., Spiesz P., Yu Q.L., Brouwers H.J.H., Development of ultra-lightweight fibre reinforced concrete applying expanded waste glass, Journal of Cleaner Production 2016, January, 112, 690-70, DOI: 10.1016/j.jclepro.2015.07.082.
• [24] Adhikary S.K., Rudzionis Z., Influence of expanded glass aggregate size, aerogel and binding materials volume on the properties of lightweight concrete, Materials Today: Proceedings 2020, April, 32, 4, 712-718, DOI: 10.1016/j.matpr.2020.03.323.

Uwagi

Opracowanie rekordu ze środków MEiN, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2022-2023).