Creating of transnational cooperation network as a factor of competitiveness

• Autorzy: Kiełbus Anna , Karpisz Dariusz

Identyfikatory

DOI

10.2478/czoto-2020-0035

• Języki publikacji: EN

Abstrakty

EN

The paper presents good practices and selected problems of creating cooperation networks. The basics of creating and disseminating new forms of cooperation between enterprises and universities have been described. Based on the implemented international project "3DCentral - Catalyzing Smart Engineering and Rapid Prototyping", selected conclusions from creating network and management of many project activities including innovative technologies are presented.

Słowa kluczowe

EN

3DCentral; transnational cooperation network; project management; rapid prototyping; smart engineering

PL

3DCentral; ponadnarodowa sieć współpracy; zarządzanie projektami; szybkie prototypowanie; inteligentna inżynieria

• Wydawca: De Gruyter
• Czasopismo: System Safety : Human - Technical Facility - Environment
• Rocznik: 2020
• Tom: Vol. 2, nr 1
• Strony: 285--291
• Opis fizyczny: Bibliogr. 28 poz., rys.

Twórcy

autor

Kiełbus Anna

• Cracow University of Technology, Poland

autor

Karpisz Dariusz

• Cracow University of Technology, Poland

Bibliografia

• [1] Boratyńska-Sala, A., Woźniak, M., 2018. Creative techniques in the field of IT project management-use cases, in: Innovation Capability for Socioeconomic Development, ICTM 6/2018, Wrocław, 296-312.
• [2] Domagala, M., 2013. Simulation of cavitation in jet pumps, Technical Transactions 110 (5), 51-58.
• [3] Domagala, M., Momein, H., Domagala-Fabis, J., Filo, G., Kwiatkowski, D., 2018. Simulation of Cavitation Erosion in a Hydraulic Valve, Mater. Res. Proc., 5, 1-6.
• [4] Domagala, M., Momeni, H., 2017. CFD simulation of cavitation over water turbine hydrofoils, Technical Transactions, 114 (9), 159-164 (2017).
• [5] Domagala, M., Momeni, H., Domagala-Fabis, J., Filo, G., Krawczyk, M., 2018. Simulation of Particle Erosion in a Hydraulic Valve, Mater. Res. Proc., 5, 17-24.
• [6] Drljača, M., 2019. Reversible supply chain in function of competitiveness, Production Engineering Archives, 22, 30-35, DOI: 10.30657/pea.2019.22.06
• [7] E. Skrzypczak-Pietraszek, 2016. High production of flavonoids and phenolic acids for pharmaceutical purposes in Vitex agnus castus L. shoot culture, New Biotechnol. 33, 155-161.
• [8] Fabis-Domagala, Domagala, M., 2017. Matrix FMEA analysis with cause-effect diagram for selected fluid power component, Technical Transactions, 114 (10), 141-146.
• [9] Fabis-Domagala, J., 2013. Application of FMEA matrix for prediction of potential failures in hydraulic cylinder, Technical Transactions, 110 (5), 97-104.
• [10] Filo, G., 2013. Computer monitoring and control system of a local LNG supply station, Technical Transactions, 110 (5), 105-112.
• [11] Filo, G., 2015. Asynchronous buffer read method in development of DAQ application for supporting research of hydraulic systems, Technical Transactions, 112 (7), 77-82.
• [12] Gliń, W. 2018. Problems of polish enterprises in the field of innovation, Production Engineering Archives, 21, 44-47, DOI: 10.30657/pea.2018.21.10
• [13] Karpisz, D., Kiełbus, A., Brunner, J., 2019. Trends in Rapid Prototyping and Smart Engineering for Central Europe based on the 3DCentral project, QPI, 1, 363-370, DOI: 10.2478/cqpi-2019-0049
• [14] Kiełbus, A., Karpisz, D., 2019. Risk management as a process security tool, SYSTEM SAFETY: HUMAN-TECHNICAL FACILITY-ENVIRONMENT, 1, 234-239, DOI: 10.2478/czoto-2019-0030
• [15] Kozien, E., Kozien, M.S., 2016. The estimation of diversification scale of production in machinery industry by application of the entropy notion.
• [16] Kozien, E., Kozien, M.S., 2017. Interval analysis as a method of measurement of uncertainity in the check-list method applied to identification of stage phase of companies, Proc. 26th Int. Sci. Conf. Economic and Social Development - "Building Resilient Society", Zagreb 08.12-09.12.2017, 210-215.
• [17] Osocha, P., 2018. Calculation of residual life for P91 material based on creep rate and time to rupture, Mater. Res. Proc., 5, 177-182.
• [18] Pawlowska, G., Klimecka-Tatar, D., Radomska, K., 2017. The effect of bio-tolerated binder content on the corrosive behavior of RE-M-B in magnetic composites in sulphite solutions, Ochr. Przed Koroz., 60, 372-375.
• [19] Pietras, P., 2015. Zarządzanie ryzykiem w komercjalizacji działalności B+R - analiza złych praktyk, in: Budowa potencjału uczelni wyższej do współpracy z przedsiębiorstwami, Wydawnictwo Uniwersytetu Łódzkiego, Łódź, 157-173.
• [20] Saniuk, S., Saniuk, A. 2018. Challenges of Industry 4.0 for Production Enterprises Functioning Within Cyber Industry Networks, Management Systems in Production Engineering, 26(4), 212–216, DOI: 10.1515/mspe-2018-0034
• [21] Stacho, Z., Stachová, K., Papula, J., Papulová, Z., Kohnová, L., 2019. Effective Communication in Organisations Increases their Competitiveness, Polish Journal of Management Studies, 19 (1), 391-403, DOI: 10.17512/pjms.2019.19.1.30
• [22] Skrzypczak-Pietraszek, E., Kwiecien, I., Goldyn, A., Pietraszek, J., 2017. HPLC-DAD analysis of arbutin produced from hydroquinone in a biotransformation process in Origanum majorana L. shoot culture, Phytochem. Lett., 20, 443-448.
• [23] Skrzypczak-Pietraszek, E., Piska, K., Pietraszek, J., 2018. Enhanced production of the pharmaceutically important polyphenolic compounds in Vitex agnus castus L. shoot cultures by precursor feeding strategy, Eng. Life Sci., 18, 287-297.
• [24] Ulewicz, R., 2016. Quality Management System operation in the woodworking industry. Int. Conf. Path Forward for wood products: a global perspective, Proc. of Sci. Papers, Zagreb, WOODEMA 51-56.
• [25] Ulewicz, R., Selejdak, J., Borkowski, S., Jagusiak-Kocik, M., 2013. Process management in the cast iron foundry, Metal 2013 Proc. 22nd Int. Conf. Metallurgy and Materials, Ostrava, Tanger, 1926-1931.
• [26] Ulewicz, R., Szataniak, P., Novy, F., 2014. Fatigue properties of wear resistant martensitic steel, Metal 2014 Proc. 23rd Int. Conf. Metallurgy and Materials, Ostrava, Tanger, 784-789.
• [27] Wlodarczyk, R., Dudek, A., Nitkiewicz, Z., 2011. Corrosion analysis of sintered material used for low-temperature fuel cell plates, Arch. Metall. Mater., 56, 181-186.
• [28] Woźniak, M., Boratyńska-Sala, A., 2018. The relation of IT project management and creativity, in: Innovation Capability for Socioeconomic Development, ICTM 6/2018, Wrocław, 278-295.

Uwagi

Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2021).