Design of a calculation fem model of the test static set-up of pipe conveyor for analysis of contact forces

• Autorzy: Fedorko G. , Molnár V.

Identyfikatory

DOI

10.12913/22998624/71268

• Języki publikacji: EN

Abstrakty

EN

Experimental research in the field of pipe conveyors is a difficult matter and yet necessary in order to answer the questions regarding the motion resistances and contact resistances of pipe conveyors, loading of the conveyor belts etc. These research activities can be performed not only during the actual operation of pipe conveyors, but also by means of the special laboratory test set-ups combined with the application of the computational simulation models. The main task of this paper is to assess the creation of a suitable simulation model of the test set-up for a specified pipe conveyor developed with regard to realisation of the FEM analyses, using the software product Abaqus, as well as presentation of its application possibilities.

Słowa kluczowe

EN

pipe conveyor; simulation; analysis; contact forces

• Wydawca: Lublin University of Technology ; Polish Society of Ecological Engineering (PTIE), Branch of PTIE in Lublin
• Czasopismo: Advances in Science and Technology. Research Journal
• Rocznik: 2017
• Tom: Vol. 11, no 2
• Strony: 220--225
• Opis fizyczny: Bibliogr. 16 poz., fig.

Twórcy

autor

Fedorko G.

• Technical University of Kosice, Letna 9, 042 00 Kosice, Slovak Republic

autor

Molnár V.

• Technical University of Kosice, Letna 9, 042 00 Kosice, Slovak Republic

Bibliografia

• 1. ABAQUS/Explicit,Version 6.9-1. Simulia documentation for the Abaqus Unified FEA product suite. T. , Providence, 2009.
• 2. Imai A. Pipe Conveyor Development, Benchmark and Future Trend. Bulk Solids Handling, 20(2), 2015.
• 3. Rozbroj J., Zegzulka J., Nečas J. Use of DEM in the Determination of Friction Parameters on a Physical Comparative Model of a Vertical Screw Conveyor. Chem. Biochem. Eng. Q., 29, 2015, 25–34.
• 4. Honus, S., Bocko, P., Bouda, T., Ristović, I., Vulić, M.: The effect of the number of conveyor belt carrying idlers on the failure of an impact place: A failure analysis. Eng. Fail. Anal., 77, 2017, 93–101.
• 5. Barburski M. Analysis of the mechanical properties of conveyor belts on the three main stages of production. Journal of Industrial Textiles, 45(6), 2014, 1–13.
• 6. Will F., Staribacher J. Pipe conveyors transport bulk material efficiently over long distances. Rohrgurtförderer Transp. Schüttgut effizient über lange Strecken, 63, 2011, 146–155.
• 7. Gajdos I., Slota J., Spisak E., Jachowicz T., Tor- Swiatek A. Structure and tensile properties evaluation of samples produced by Fused Deposition Modeling. Open Eng., 6, 2016, 86–89.
• 8. Michalik P., Zajac J. Using of computer integrated system for static tests of pipe conveyer belts. In: 13th Int. Carpathian Control Conf. (ICCC). High Tatras. pp. 480–485, 2012.
• 9. Zamiralova M.E., Lodewijks G. Measurement of a pipe belt conveyor contact forces and cross section deformation by means of the six-point pipe belt stiffness testing device. Measurement, 70, 2015, 232–246.
• 10. Mazurkiewicz D. Problems of identification of strength properties of rubber materials for purposes of numerical analysis : a review. Arch. Civ. Mech. Eng., 10(1), 2010, 69–84.
• 11. Egorov A.P. Definition of longitudinal critical speed size at vertical fluctuations of a tubular conveyor´s belt. Mining Informational Anal. Bull., 2009, 138–143.
• 12. Husáková N., Honus S. Reverse Material Flow of Worn-Out Conveyor Belts. Appl. Mech. Mater., 683, 2014, 183–188.
• 13. Madáč K., Durkáč V., Kráľ J. Design of applications for CAD system Creo Parametric 1.0. Int. Sci. Her., 4, 2012, 278–284.
• 14. Strohmandl J. Use of simulation to reduction of faulty products. UPB Sci. Bull. Ser. D Mech. Eng., 76, 2014, 223–230.
• 15. Mantič M., Kuľka J., Krajňák J., Kopas M., Schneider M. Influence of selected digitization methods on final accuracy of 3D model. In: Majerník, M., Daneshjo, N., and Bosák, M. (eds.) Production Management and Engineering Sciences. pp. 475–480. CRC Press Taylor and Francis Group A Balkema Book, 2016.
• 16. Debski H., Koszalka G., Ferdynus M. Application of FEM in the analysis of the structure of a trailer supporting frame with variable operation parameters. Eksploatacja i Niezawodnosc – Maintenance and Reliability, 14, 2012, 107–113.

Uwagi

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę (zadania 2017)