Preparation of construction production of metal sheet for means of transport

• Autorzy: Penkała P. , Płowaś B
• Języki publikacji: EN

Abstrakty

EN

The design of sheet metal parts, pressed, used in the automotive industry is very complicated. Many factors influence the final shape of the part. Contemporary designer does not need to have the knowledge needed to understand the essence of its all requirements that are placed on parts of the body. It is only important that they are aware of their existence and know who in the company can help them in their fulfilment of the construction. Nowadays, only the constructor creates a CAD model geometry, which is assumed to provide the functionality. The rest of the aspects such as the provision of adequate stiffness, manufacturability, assembly features, vibration analysis, etc., are the arena of other specialists. This is the essence of constructing simultaneous, where many cell companies often work on the same element, giving it a set of features impossible to obtain by one expert on everything. Therefore, the role of the designer is often limited to being only a CAD system operator.

Słowa kluczowe

EN

simultaneous construction; pressed parts; CAD; curvilinear surfaces

• Wydawca: Lublin University of Technology ; Polish Society of Ecological Engineering (PTIE), Branch of PTIE in Lublin
• Czasopismo: Advances in Science and Technology. Research Journal
• Rocznik: 2013
• Tom: Vol. 7, nr 17
• Strony: 77--82
• Opis fizyczny: Bibliogr. 7 poz., fig.

Twórcy

autor

Penkała P.

• nstitute of Technological Systems of Information, Faculty of Mechanical Engineering, Nadbystrzycka 36, 20-781 Lublin, Poland

autor

Płowaś B

• Institute of Technical Sciences and Aviation, The State School of Higher Education in Chełm, Pocztowa 54, 22-100 Chełm, Poland

Bibliografia

• 1. Anselm D.: Die PKW-Karosserie. Vogel Business Media; Auflage: 2, Aufl., 2001.
• 2. Rusiński E.: Zasady projektowania konstrukcji nośnych pojazdów samochodowych. Oficyna wydawnicza Politechniki Wrocławskiej, Wrocław 2002.
• 3. Braess H.-H., Seiffert U.: Vieweg Handbuch Kraftfahrzeugtechnik. GWV Fachverlage, 2003.
• 4. http://www-home.htwg-konstanz.de, styczeń 2011.
• 5. http://www.rucker.pl/index.php?id=4&id2=4_1, styczeń 2011.
• 6. Pippert H.: Karosserietechnik. Vogel Verlag Und Druck, 1998.
• 7. Zieliński A.: Konstrukcja nadwozi samochodów osobowych i pochodnych. WKiŁ, Warszawa 2004.