Influence of design factors on weldability of the AZ91E alloy

• Autorzy: Adamiec J.
• Języki publikacji: EN

Abstrakty

EN

Basic design factors which influence weldability include casting shape, its stiffness and type of welded joint. The influence of casting stiffness on weldability, understood as susceptibility to hot cracking, in conditions of constant joint stiffness has been determined on the basis of the Fisco test results, and in conditions of varying stiffness on the basis of the Houldcroft test.

Słowa kluczowe

EN

casting defect; magnesium alloy; hot cracking; AZ91 alloy; Fisco test; Houldcroft test

PL

wada odlewu; stop magnezu; pękanie na gorąco; stop AZ91; próba Houldcrofta

• Wydawca: Komisja Odlewnictwa Polskiej Akademii Nauk Oddział w Katowicach
• Czasopismo: Archives of Foundry Engineering
• Rocznik: 2010
• Tom: Vol. 10, iss. 1 spec.
• Strony: 339--344
• Opis fizyczny: Bibliogr. 15 poz., rys., tab., wykr.

Twórcy

autor

Adamiec J.

• Department of Materials Science, Silesian University of Technology University, ul. Krasińskiego 8, 40-019 Katowice, Poland

Bibliografia

• [1] Avedesian M., Baker H., Magnesium and Magnesium Alloys. ASM Speciality Handbook, 1999.
• [2] Dahle A.K., and others: Development of the as-cast microstructure in magnesium-aluminum alloys, Journal of Light Metals 1 (2001) p. 61.
• [3] Roskosz S., Adamiec J. Quantitative description of Mg-Al alloy structure, Acta Metallurgica Slovacia 1/2007.
• [4] Kiełbus A. Adamiec J. Hetmańczyk M.: Microstructure of die casting alloy of magnesium GA8, Archiwum Odlewnictwa nr 18, rok 2006, p 203-208, (in polish).
• [5] Friedrich H.E., Mordike B.L. (Eds), Magnesium Technology. Metallurgy, Design Data, Applications, Springer-Verlag Berlin Heidelberg, 2006.
• [6] Adamiec J. , Chabko T.: Problems by welding and overlay welding casting of magnesium alloy AZ91D, Spajanie 2/4/2009, 2009, p. 20-23, (in polish).
• [7] Roskosz S. Adamiec J., Błonicki M.: Influence of delivery state quality on microstructure and mechanical properties of as cast AZ91 Mg alloy, Archives of foundry Engineering, Vol. 7, 1/2007, 2007 p 143-146.
• [8] Magnesium alloys and processing technologies for lightweight transport applications – a mission to Europe, Global Watch Mission Report, MAG TECH 1,2004.
• [9] Friedrich H.E., Mordike B.L. (Eds), Magnesium Technology. Metallurgy, Design Data, Applications, Springer-Verlag Berlin Heidelberg, 2006.
• [10] Mordike B.L. Wiesner P.: Fugen von Magnesium Werkstoffen, DVS Verlag 2005.
• [11] Kiełbus. A, Kuc D., Rzychoń T.: Magnesium alloys – microstructure,properties and applications in Szkliniarz W: Modern metalllic materials, Wyd. Politechnika Śląska 2009, p.61-102, (in polish).
• [12] Adamiec J., Roskosz S., Jarosz R. : Repair of Magnesium Alloy Castings By Means of Welding and Pad Welding, Journal of Achievements in Materials and Manufacturing Engineering, vol. 22, issue 1, 2007, p: 21-24.
• [13] Pilarczyk J.: Handbook of Welding, Vol 1, WNT, Warszawa 2003.
• [14] Bollinghaus T., Herold H., Cross C., Lippold J.: Hot cracking phenomena in welds II, rozdz. Katgerman L., Eskin D.G.: In search of the prediction of hot cracking in aluminum alloys, Springer 2008.
• [15] Herold H. Pchennikov A., Steitenberger: Influence of deformation rate of different test on hot cracking formation, Bollinghaus T., Herold H. Hot cracking phenomena in welds, Springer 2005, p. 328-346.