Low alloy steel shaft surface regenerative welding with micro-jet cooling

• Autorzy: Szczucka-Lasota B. , Węgrzyn T. , Lukaszkowicz K.

Identyfikatory

DOI

10.20858/sjsutst.2019.102.17

• Języki publikacji: EN

Abstrakty

EN

In this paper, the effect of surface preparation after innovating welding technology with micro-jet cooling was reported. Substantial information about parameters of steel machine elements surfacing with the micro-jet cooling process was given. Recorded evidence concerning the influence of various micro-jet parameters on the metallographic structure of the machine shaft after surface welding was taken. There were tested metallographic and tribology properties of welds. The tribology interactions of a solid shaft surfaces were examined after surface welding.

Słowa kluczowe

EN

welding; micro-jet cooling; metallographic structure; wearing

PL

spawanie; chłodzenie mikrostrumieniowe; struktura metalograficzna; zużycie

• Wydawca: Wydawnictwo Politechniki Śląskiej
• Czasopismo: Zeszyty Naukowe. Transport / Politechnika Śląska
• Rocznik: 2019
• Tom: z. 102
• Strony: 205--215
• Opis fizyczny: Bibliogr. 11 poz.

Twórcy

autor

Szczucka-Lasota B.

• Faculty of Transport, The Silesian University of Technology, Krasińskiego 8 Street, 40-019 Katowice, Poland.

autor

Węgrzyn T.

• Faculty of Transport, The Silesian University of Technology, Krasińskiego 8 Street, 40-019 Katowice, Poland.

autor

Lukaszkowicz K.

• Faculty of Mechanical Engineering, The Silesian University of Technology, Konarskiego 18a Street, 44-100 Gliwice, Poland

Bibliografia

• 1. Evans G.M. 1994. ”Microstructure and properties of ferritic steel welds containing Al and Ti”. Oerlikon-Schweissmitt 130: 21-39.
• 2. Krayushkina K., O. Prentkovskis, A. Bieliatynskyi, R. Junevičius. 2012. “Use of steel slags in automobile road construction”. Transport 27(2): 129-137.
• 3. Burdzik R., Ł. Konieczny, Z. Stanik, P. et al. 2014. “Analysis of impact of chosen parameters on the wear of camshaft”. Archives of Metallurgy and Materials 59(3): 957-963. DOI: 10.2478/amm-2014-0161.
• 4. Fornalczyk A., J. Willner, J. Cebulski et al. “Structure and surface state of different catalytic conveters applied in cars”. The 5th international Lower Silesia-Saxony conference “Advanced Metal Forming processes in automotive industry (AutoMetForm 2016)”. Wroclaw, Poland, 28-29 June 2016. P. 327-333.
• 5. Aleksić V., M. Dojčinović, L. Milović, I. Samardžić. 2016. „Cavitation damages morphology of high-strength low-alloy steel”. Metalurgija 55(3): 423-425.
• 6. Kasuya T., Y. Hashiba, S. Ohkita, M. Fuji. 2001. “Hydrogen distribution in multipass submerged arc weld metals”. Science and Technology of Welding and Joining 6(4): 261-266. DOI: 10.1179/136217101101538767.
• 7. Hadryś D. 2015. “Impact load of welds after micro-jet cooling”. Archives of Metallurgy and Materials 60(4): 2525-2528.
• 8. Bąkowski H. 2018. “Wear Mechanism of spheroidal cast iron piston ring-aluminum matrix composite cylinder liner contact”. Archives of Metallurgy and Materials 63 (1): 481-490. DOI: 10.24425/118965.
• 9. Sozańska M., A. Maciejny, C. Dagbert et al. 1999. “Use of quantitive metallography in the evaluation of hydrogen action during martensitic transformations”. Materials Science and Engineering 273-275: 485-490. DOI: 10.1016/S0921-5093(99)00333-0.
• 10. Grazeviciute J., I. Skiedraite, V. Jurenas, A. Bubulis, V. Ostaševičius. 2008. “Applications of high frequency vibrations for surface milling”. Mechanika (1): 46-49.
• 11. Hadryś D. 2016. “Mechanical properties of plug welds after micro-jet cooling”. Archives of Metallurgy and Materials 61: 1771-1775.

Uwagi

PL

Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2020).