PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Influence of the type of membrane-forming polymer on the membrane fouling

Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
The effect of the membrane-forming polymer (PES, PAN and PVDF) on the fouling phenomenon has been investigated occurring on the surface of the ultrafiltration membranes used for the polishing of industrial wastewater pre-treated by biological methods. The activated sludge method in SBR reactor was used to treat dairy wastewater mixed with 10 vol. % of landfill leachate. The susceptibility assessment of polymeric membranes to the fouling phenomenon was carried out using the plate-and-frame membrane module SEPA CF-NP produced by GE Osmonics. The following properties of the mem-brane were determined: the dependence of the volumetric flux of the permeate on the process duration, the transport properties of deionized water, the relative permeability of the membrane for the flux of deionized water and for the wastewater flux, as well as the contact angle of the membranes. It can be concluded that the kind of membrane-forming polymer had an influence on the fouling phenomenon occurring on the ultrafiltration membranes used for the polishing of industrial wastewater treated in a SBR reactor.
Rocznik
Strony
197--210
Opis fizyczny
Bibliogr. 20 poz., tab., rys.
Twórcy
  • Silesian University of Technology, Institute of Water and Wastewater Treatment, Division of Sanitary Chemistry and Membrane Processes, ul. Konarskiego 18, 44-100 Gliwice Poland
  • Silesian University of Technology, Institute of Water and Wastewater Treatment, Division of Sanitary Chemistry and Membrane Processes, ul. Konarskiego 18, 44-100 Gliwice Poland
autor
  • Silesian University of Technology, Institute of Water and Wastewater Treatment, Division of Sanitary Chemistry and Membrane Processes, ul. Konarskiego 18, 44-100 Gliwice Poland
  • Warsaw University of Technology, Faculty of Chemistry, ul. Noakowskiego 3, 00-664 Warsaw, Poland.
Bibliografia
  • [1] GUOA W., NGOA H., LI J., A mini-review on membrane fouling, Biores. Technol., 2012, 122, 27.
  • [2] AMY G., Fundamental understanding of organic matter fouling of membranes, Desalination, 2008, 231, 44.
  • [3] BODZEK M., PŁATKOWSKA A., Fouling of semi-permeable membranes during the purification of water by ultrafiltration and microfiltration. A review, Inż. Ochr. Środ., 2009, 12 (1), 1 (in Polish).
  • [4] DREWS A., Membrane fouling in membrane bioreactors. Characterization, contradictions, cause and cures, J. Membrane Sci., 2010, 363, 1.
  • [5] DUAN L., JIANG W., SONG Y., XIA S., HERMANOWICZ S., The characteristics of extracellular polymeric substances and soluble microbial products in moving bed biofilm reactor-membrane bioreactor, Bio-resource Technol., 2013, 148, 436.
  • [6] KATSOUFIDOU K., YIANTSIOS S.G., KARABELAS A.J., A study of ultrafiltration membrane fouling by humic acid and flux recovery by backwasching. Experiments and modeling, J. Membrane Sci., 2005, 266, 40.
  • [7] WANG P., WANG Z., WU Z., MAI S., Fouling behaviours of two membranes in a submerged membrane bioreactor for municipal wastewater treatment, J. Membrane Sci., 2011, 382, 60.
  • [8] ZHANG J., ZHOU J., LIU Y., FANE A., A comparison of membrane fouling under constant and variable organic loadings in submerge membrane bioreactors, Water Res., 2010, 44, 5407.
  • [9] CHOI J.H., NG H.Y., Effect of membrane type and material on performance of a submerged membrane bioreactor, Chemosphere, 2008, 71, 853.
  • [10] ZHANG G.J., JIA S.L., GAO X., LIU Z.Z., Adsorptive fouling of extracellular polymeric substances with polymeric ultrafiltration membranes, J. Membrane Sci., 2008, 309, 28.
  • [11] Specification of flat membranes BN i MQ Synder Filtration, www.synderfiltration.com
  • [12] Technical Bulletin GE Power and Water, http://www.gewater.com/
  • [13] LAWRENCE N., PERERA J., IYER M., HICKEY M., STEVENS G., The use of streaming potential measurements to study the fouling and cleaning of ultrafiltration membranes, Sep. Purif. Technol., 2006, 48, 106.
  • [14] SALGIN S., SALGIN U., SOYER N., Streaming potential measurements of polyethersulfone ultrafiltration membranes to determine salt effects on membrane zeta potential, Inter. J. Electrochem. Sc., 2013, 8, 7073.
  • [15] NYSTROM M., LINDSTROM M., MATTHIASSON E., Streaming potential as a tool in the characterization of ultrafiltration membranes, Colloids Surf. 1989, 36, 297.
  • [16] WANG D., LI K., TEO W.K., Preparation and characterization of polyvinylidene fluoride (PVDF) hollow fiber membranes, J. Membrane Sci., 1999, 163, 211.
  • [17] XU A., YANG A., YOUNG S., DEMONTIGNY D., TONTIWACHWUTHIKUL P., Effect of internal coagulant on effectiveness of polyvinylidene fluoride membrane for carbon dioxide separation and absorption, J. Membrane Sci., 2008, 311, 153.
  • [18] YEOW M.L., LIU Y., LI K., Preparation of porous PVDF hollow fibre membrane via a phase inversion method using lithium perchlorate (LiClO4) as an additive, J. Membrane Sci., 2005, 258, 16.
  • [19] ZHANG M., ZHANG A.Q., ZHU B.K., DU C.H., XU Y.Y., Polymorphism in porous (polywvinylidene fluoride) membranes formed via immersion precipitation process, J. Membrane Sci., 2008, 319, 169.
  • [20] ŚWIERCZYŃSKA A., BOHDZIEWICZ J., The effect of the type of membrane-forming polymer on the occurrence of the fouling phenomenon. Membranes and Membrane Processes in Environmental Protection, Monographs of the Environmental Engineering Committee Polish Academy of Sciences, 2014, 119, 209.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-1cf59cbe-b905-4980-a708-4dc30aa47f3f
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.