Comparative study in the passive force and cutting torque in the milling process of polymer matrix composites and aluminum alloys

• Autorzy: Ciecieląg K , Zaleski K.
• Języki publikacji: EN

Abstrakty

EN

This paper presents the results of a study undertaken to investigate the passive force and cutting torque during the milling of carbon fiber reinforced plastics saturated with epoxy resin and two aluminum alloys: AlSi21CuNi (AK 20) and 7075 (PA 9). The milling process was conducted using end mills with diamond inserts. The machining parameters were changed equally for each material as a result of which the passive force and cutting torque during the milling of these materials could be compared.

Słowa kluczowe

EN

polymer composites; silumin; duralumin; passive force; cutting torque

• Wydawca: Lublin University of Technology ; Polish Society of Ecological Engineering (PTIE), Branch of PTIE in Lublin
• Czasopismo: Advances in Science and Technology. Research Journal
• Rocznik: 2013
• Tom: Vol. 7, nr 18
• Strony: 6--12
• Opis fizyczny: ibliogr. 7 poz., fig., tab.

Twórcy

autor

Ciecieląg K

• Department of Mechanical Engineering, Lublin University of Technology, ul. Nadbystrzycka 36, 20-618 Lublin, Poland

autor

Zaleski K.

• Department of Mechanical Engineering, Lublin University of Technology, ul. Nadbystrzycka 36, 20-618 Lublin, Poland

Bibliografia

• 1. Kalla D., Sheikh-Ahmad J., Twomey J.: Prediction of cutting forces in helical end milling fiber reinforced polymers. Int. J. Mach. Tools and Mfg., 50, 2010, 882–891.
• 2. Sahraie Jahromi A., Bahr B.: An analytical method for predicting cutting forces in orthogonal machining of unidirectional composites. Composite Science and Technology, 70, 2010, 2290–2297.
• 3. Karpata Y., Bahtiyarb O., Değerb B.: Mechanistic force modeling for milling of unidirectional carbon fiber reinforced polymer laminates, International Journal of Machine Tools and Manufacture, 56, 2012, 79–93.
• 4. Teti R.: Machning of Composite Materials. Annales of the CIRP, 51(2), 2002, 611-634.
• 5. Caprino G., De lorio I., Nele L., Santo L.: Effect of tool wear on cutting forces in the orthogonal cutting forces in the orthogonal cutting of unidirectional glass fibre-reinforces plastics. Composites, Part A, 27A, 1996, 409-415.
• 6. Boczkowska A., Kapuściński K., Lindemann Z., Witemberg-Perzyk D., Wojciechowski S.: Kompozyty, Oficyna Wydawnicza Politechniki Warszawskiej, Warszawa 2003.
• 7. Ochelski S.: Metody doświadczalne mechaniki kompozytów polimerowych, WNT, Warszawa 2004.