A comparative analysis of temperature control algorithms for spray booths

• Autorzy: Jaszczak S. , Nikończuk P.
• Języki publikacji: EN

Abstrakty

EN

Authors present a development of the temperature control system in the spray booth equipped with the two - state burner. The paper presents results of temperature control for different conditions of the external air temperature. A typical two-state algorithm isn’t enough effective to minimise temperature fluctuation amplitudes inside a spray booth. Minimisation of the number of burner ignitions with acceptable fluctuation amplitudes of the temperature is possible by means of : modification of the measurement loop, modifications of the two-state algorithm. Minimisation of number of burner ignitions will increase durability of the burner and decrease consumption fuel used to start the burner. In the final part of the article selected results of real time experiments were presented and shortly analysed.

Słowa kluczowe

EN

spray booth; supervisory control system; safety

• Wydawca: Wydawnictwo PAK
• Czasopismo: Measurement Automation Monitoring
• Rocznik: 2018
• Tom: Vol. 64, No. 3
• Strony: 63--66
• Opis fizyczny: Bibliogr. 10 poz., rys., tab., wykr., wzory

Twórcy

autor

Jaszczak S.

• West Pomeranian University of Technology in Szczecin, Department of Computer Science, Pl-71210 Szczecin, 49 Żołnierska St., Poland

autor

Nikończuk P.

• West Pomeranian University of Technology in Szczecin, Department of Maritime Technology and Transport, Pl-71065 Szczecin, 41 Piastów Ave., Poland

Bibliografia

• [1] Meaers Feng L.: Analysis of hvac energy in automotive paint shop, asme 2015 international manufacturing science and engineering conference. In Volume 2: Materials; Biomanufacturing; Properties, Applications and Systems; Sustainable Manufacturing, Charlotte, North Carolina, USA, June 2015.
• [2] Filev F.: Conference: Fuzzy systems fuzz-ieee’02. In Applied intelligent control - control of automotive paint process. IEEE, 2002.
• [3] Nikończuk P., Jaszczak S.: A model of the refinishing spray booth as a plant of automatic control. Measurement Automation Monitoring, 61(7):361–363, 2015.
• [4] Nikończuk P.: Evolutionary algorithms application for optimal controller. Polish Journal of Enviromental Studies, 17(4C):88–90, 2008.
• [5] Nikończuk P.: Preliminary analysis of heat recovery efficiency decrease in paint spray booths. Transactions of the Institute of Metal Finishing, 92(-):235–237, 2014.
• [6] Nikończuk P.: Study of heat recovery in spray booths. Metal Finishing, 111:37–39.
• [7] Piegat A., Pluciński M.: Fast-learning neuro-fuzzy pid-controller with minimal number of fuzzy regions. International Journal of Applied Mathematics and Computer Science., 7:171–184, 1997.
• [8] Pivonka P.: Comparative analysis of fuzzy pi/pd/pid controller based on classical pid controller approach. Fuzzy Systems, 1:541–546, 2002.
• [9] Löfberg J., Ottosson M., Rohdin P., Johansson M.: Energy efficient process ventilation in paint shops in the car industry - experiences and an evaluation of a fullscale implementation at saab automobile in sweden. Ventilation, 2012.
• [10] Ogonowski Z.: Drying control system for spray booth with optimization of fuel consumption. Applied Energy, 88(5):1586–1595, 2011.

Uwagi

PL

Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2019).