TiO2/PANI nanocomposite loaded in PVA for anticorrosive applications

Arora, R.; Srivastav, A.; Mandal, U. K.; Sharma, P.

doi:10.1515/msp-2016-0096

Artykuł - szczegóły

Tytuł artykułu

TiO2/PANI nanocomposite loaded in PVA for anticorrosive applications

Autorzy

Arora R. , Srivastav A. , Mandal U. K. , Sharma P.

Wybrane pełne teksty z tego czasopisma

Identyfikatory

DOI

10.1515/msp-2016-0096

Warianty tytułu

Języki publikacji

Abstrakty

We report the morphological and electrical study of a composite of polyvinyl alcohol (PVA) and nanotitanium dioxide (TiO₂-50 nm) in conducting polymer polyaniline (PANI). The composite was synthesized using in-situ polymerization technique. The composite was characterized in terms of morphology and electrical properties using scanning electron microscopy and DC electrical conductivity (σ_dc). We observed that the DC electrical conductivity of the composite film increased with increasing the loading of nanocomposite material from 20 % to 40 % into PVA stabilizer. The DC conductivity results showed that the molecular chain contribution of the nanocomposite material (nano-TiO₂-+ PANI) was the prominent carrier in the composite film made of the nanocomposite and PVA stabilizer.

Słowa kluczowe

DC conductivity nanocomposite in situ polymerization corrosion PVA

Wydawca

De Gruyter

Czasopismo

Materials Science Poland

Rocznik

2016

Tom

Vol. 34, No. 4

Strony

721--725

Opis fizyczny

Bibliogr. 37 poz., rys., tab.

Twórcy

autor

Arora R.

rarajeevmanik@gmail.com

Department of Mechanical Engineering, Invertis University, Bareilly, India

autor

Srivastav A.

Middle East College, Knowledge Oasis Muscat, Muscat, Oman

autor

Mandal U. K.

School of Chemical Technology, G.G.S. Indraprastha University, New Delhi, India

autor

Sharma P.

Department of Physics and Materials Science, Jaypee University of Information Technology, Waknaghat, Solan, H.P. (173234), India

Bibliografia

[1] NASIRIAN S., MOGHADDAM H.M., Polymer, 55 (2014), 1866.
[2] SRIVASTAVA S., KUMAR S., SINGH V.N., SINGH M., VIJAY Y.K., Int. J. Hydrogen Energ., 36 (2011), 6343.
[3] PATIL D.S., SHAIKH J.S., DALAVI D.S., KALAGI S.S., PATIL P.S., Mater. Chem. Phys., 128 (2011), 449.
[4] XIAO Y., LIN J.YU., WANG W.Y., TAI S.Y., YUE G., WU J., Electrochim. Acta, 90 (2013), 468.
[5] MOSTAFAEI A., NASIRPOURI F., Prog. Org. Coat., 77 (2014), 146.
[6] RAMAMURTHY P.C., MALSHE A.M., HARRELL W.R., GREGORY R.V., MCGUIRE K., RAO A.M., Solid State Electron., 48 (2004), 2019.
[7] MOSTAFAEI A., ZOLRIASATEIN A., Prog. Nat. SciMater., 22 (2012), 273.
[8] SUDHA J.D., SIVAKALA S., PATEL K., RADHAKRISHNAN N.P., Compos. Part A- Appl. S., 41 (2010), 1647.
[9] XIAOXUAN LI, Electrochim. Acta, 545 (2009), 634.
[10] WANG J., ZHANG K., ZHAO L., Chem. Eng. J., 239 (2014), 123.
[11] LONG Y., CHEN Z., WANG N., ZHANG Z., WAN M., Physica B, 325 (2003), 208.
[12] YANG D., L.W., GOERING R., MATTES B.R., Synthetic Met., 159 (2009), 666.
[13] JAYMAND M., Prog. Polym. Sci., 38 (2013), 287.
[14] BHADRA S., KHASTGIR D., SINGHA N.K., LEE J.H., Prog. Polym. Sci., 34 (2009), 783.
[15] ARENAS M.C., SANCHEZ G.O., MARTINEZ-A., CASTANO V.M., Compos. Part B- Eng., 56 (2014), 857.
[16] LI Y., YING B., HONG L., YANG M., Synthetic Met., 160 (2010), 455.
[17] MIRMOHSENI A, WALLACE G.G., Polymer, 44 (2003), 3523.
[18] GANGOPADHYAY R., DE A., GHOSH G., Synthetic Met., 123 (2001), 21.
[19] DUTTA P., BISWAS S., GHOSH M., DE S.K., CHATTERJEE S., Synthetic Met., 122 (2001), 455.
[20] ZHANG Z., WAN M., Synthetic Met., 128 (2002), 83.
[21] IRIMIA-VLADU M., FERGUS J.W., Synthetic Met., 156 (2006), 1401.
[22] PATIL D.S., SHAIKH J.S., DALAVI D.S., KALAGI S.S., PATIL P.S., Mater. Chem. Phys., 128 (2011), 449.
[23] JEEVANANDA T., SIDDARAMAIAH, Eur. Polym. J., 39 (2003), 569.
[24] DEVENDRAPPA H., SUBBA RAO U.V., AMBIKA PRASAD M.V.N., J. Power Sources, 155 (2006), 368.
[25] KIM B.-S., LEE K.-T., HUH P.-H., LEE D.-H., JO N.-J., LEE J.-O., Synthetic Met., 159 (2009), 1369.
[26] LI X., WANG D., LUO Q., AN J., YANHONG W., CHENG G., J. Chem. Technol. Biot., 83 (2008), 158.
[27] GANGOPADHYAY R., DE A., Synthetic Met., 132 (2002), 21.
[28] SOMANI P.R., MARIMUTHU R., MULIK U.P., SAINKAR S.R., AMALNERKAR PRAK D.P., Synthetic Met., 106 (1999), 45.
[29] KYMAKIS E., ALEXANDOU I., AMARATUNGA G.A.J., Synthetic Met., 127 (2002), 59.
[30] MAMINYA Y.P., DAVYDENKO V.V., PISSIS P., LEBEDEV E.V., Eur. Polym. J., 381(2002), 887.
[31] HUNG J.C., Adv. Polym. Tech., 21 (4) (2002), 299.
[32] KHUSPE G.D., NAVALE S.T., CHOUGULE M.A., SEN SHASHWATI, AGAWANE G.L., KIM J.H., PATIL V.B., Synthetic Met., 178 (2013), 1.
[33] DUTTA P., BISWAS S., GHOSH M., DE S.K., CHATTERJEE S., Synthetic Met., 122 (2001), 455.
[34] LI X.-W., WANG G.-C., LI X.-X., LU D.-M., Appl. Surf. Sci., 229 (2004), 395.
[35] SENARATHNA C.K.G., MANTILAKA M.M.M.G.P.G., NIRMALPEIRIS T.A., PITAWALA H.M.T.G.A., KARUNARATNE D.G.G.P., RAJAPAKSE R.M.G., Electrochim. Acta, 117 (2014), 460.
[36] LI X., WANG G., LI X.-X., LU D., Appl. Surf. Sci., 229 (2004), 395.
[37] SRIVASTAVA S., KUMAR S., SINGH V.N., SINGH M., VIJAY Y.K., Int. J. Hydrogen. Energ., 366 (2011), 343.

Uwagi

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę (zadania 2017).

Typ dokumentu

Bibliografia

Identyfikator YADDA

bwmeta1.element.baztech-1c2c72d4-2558-4b54-ace1-c332d452de3f