Water-based coatings powered by NANO-VpCI

• Autorzy: Miksic B. , Kharshan M. , Camp R.
• Języki publikacji: EN

Abstrakty

EN

Today’s water-borne coatings are steadily approaching to fulfill several requirements that are usually met by solvent-borne systems (good adhesion, corrosion resistance, and improved weathering). Aqueous technologies are generally preferred over their solvent-based counterparts due to ease of application, lower VOC’s, and cost. However, waterborne coatings still struggle to provide long term protection for metals in extremely corrosive environments. Through research it has been found that combining Vapor Phase Corrosion Inhibitors (NANO-VpCI) with a Non-zinc environmentally friendly metal complex inhibitor will significantly improve the long-term corrosion protection of acrylic paints on steel substrates; the combination of these inhibitors provides a synergetic multi-layer defense of corrosion resistance thru passivation and film formation. This paper investigates the use of Vapor Phase Corrosion Inhibitor (NANO-VpCI) technology with a Non-zinc environmentally friendly metal complex inhibitor to greatly improve the long-term corrosion protection of an acrylic coating applied direct-to-metal (DTM).

Słowa kluczowe

EN

coating; water-based coating; vapor phase corrosion inhibitors; NANO-VpCI

PL

powłoka; lakier wodny; NANO-VpCI

• Wydawca: Sieć Badawcza Łukasiewicz – Instytut Inżynierii Materiałów Polimerowych i Barwników
• Czasopismo: Farby i Lakiery
• Rocznik: 2015
• Tom: nr 4
• Strony: 7--11
• Opis fizyczny: Bibliogr. 8 poz., rys.

Twórcy

autor

Miksic B.

• Cortec Corporation 4119 White Bear Parkway, St. Paul, MN 55110 U.S.A.

autor

Kharshan M.

• Cortec Corporation 4119 White Bear Parkway, St. Paul, MN 55110 U.S.A.

autor

Camp R.

• Cortec Corporation 4119 White Bear Parkway, St. Paul, MN 55110 U.S.A.

Bibliografia

• 1. Wrangl'n, G., (185), An Introduction to Corrosion and Protection of Metals, Champman ,& Hall, N.Y, pp. 165-173
• 2. Dean (Jr), S.W., (1981), Inhibitor Type, Materiał Performance, 20 (11), 47-51
• 3. Lenard, D.R. and Moors, J.G., (1993), the Effects of Vapor Phase Corrosion Inhibitors on the Galvanic Corrosion of Aluminium, Corrosion Science, 34 (5), 871-880
• 4. Trabanelli, G. and Carassiti, V, (1970), Advances in Corrosion Science and Technology, Eds. M.G. Fontana and R.W. Stachle, Vol. I, Plenum, N.Y., 186-188
• 5. Miksie, B.A., (1983), Use of Vapor Phase Inhibitors for Corrosion Protection of Metal Products, Corrosion, 83, Paper No. 308, NACE, Houston
• 6. Nate Kofira, Technical Development Manager; Halox Company, Hammond, Indiana
• 7. Miksie, B.A, Tarvin, M., and Sparrow, G.R. (1989), Surface analytical Techniques in Evaluation of the Effects of Vapor Phase Organie Corrosion Inhibitors on Surface Chemistry of Metals, Corrosion, 89, Paper No. 607, NACE, Houston
• 8. Metal Handbook, (1987), ASM International, Vol. 13, Corrosion, pp. 524-25