Influence of Corrosion on Thermo-Mechanical Contact Fatigue in Rolling Conditions with Low Amplitude Sliding

• Autorzy: Mistreanu Sebastian , Tudose-Sandu-Ville Florin , Munteanu Corneliu , Cimpoesu Ramona , Lutcanu Marian , Știrbu Ioan , Manole Vasile , Stamate Ciprian , Rusu Oana , Cimpoeșu Nicanor

Identyfikatory

DOI

10.24425/amm.2024.149792

• Języki publikacji: EN

Abstrakty

EN

The paper presents some aspects concerning mechanical contact fatigue and corrosion wear and the links of these two kinds of wear in the common deterioration of the contact layer. The surface state, for both presented areas, is analyzed using scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS) in order to confirm the double action of corrosion and wear during the experimental test. 2 and 3D insights were taken from the worn area, corrosion compounds were identified and analyzed. Linear and cyclic potentiometry were performed on the base materials after the OCP was established in salt solution. When the level of the thermal and the mechanical stress are located at the same depth under the contact surface the resulting stress is greater and has the opportunity to develop the first crack to the surface. The metallic material surface presents a double type of corrosion: one based on oxidation and the other one based on oxidation plus wear (tribo-corrosion), the difference is being given by the material quantity and type involved.

Słowa kluczowe

EN

thermo-mechanical contact fatigue; corrosion wear; Jacq thermal anomaly

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2024
• Tom: Vol. 69, iss. 2
• Strony: 631--638
• Opis fizyczny: Bibliogr. 24 poz., fot, rys., tab.

Twórcy

autor

Mistreanu Sebastian

• Gheorghe Asachi University of Iasi, Faculty of Materials Science and Engineering, 43 Dimitrie Mangeron str., 700050, Iasi

• https://orcid.org/0000-0002-5080-8265

autor

Tudose-Sandu-Ville Florin

• Gheorghe Asachi University of Iasi, Faculty of Mechanics, Mechanical Engineering , Mechatronics and Robotics, 43 Dimitrie Mangeron str., 700050, Iasi

• https://orcid.org/0000-0002-6825-5478

autor

Munteanu Corneliu

• Gheorghe Asachi University of Iasi, Faculty of Mechanics, Mechanical Engineering , Mechatronics and Robotics, 43 Dimitrie Mangeron str., 700050, Iasi

• https://orcid.org/0000-0002-3878-9129

autor

Cimpoesu Ramona

• Gheorghe Asachi University of Iasi, Faculty of Materials Science and Engineering, 43 Dimitrie Mangeron str., 700050, Iasi

• https://orcid.org/0000-0002-5128-4491

autor

Lutcanu Marian

• Gheorghe Asachi University of Iasi, Faculty of Materials Science and Engineering, 43 Dimitrie Mangeron str., 700050, Iasi
• Gheorghe Asachi University of Iasi, Department of Physics, 67 Dimitrie Mangeron str., 700050, Iasi

• https://orcid.org/0000-0002-4177-3881

autor

Știrbu Ioan

• Gheorghe Asachi University of Iasi, Faculty of Materials Science and Engineering, 43 Dimitrie Mangeron str., 700050, Iasi

• https://orcid.org/0000-0002-2715-0557

autor

Manole Vasile

• Gheorghe Asachi University of Iasi, Faculty of Materials Science and Engineering, 43 Dimitrie Mangeron str., 700050, Iasi

• https://orcid.org/0000-0003-2221-300X

autor

Stamate Ciprian

• Gheorghe Asachi University of Iasi, Faculty of Materials Science and Engineering, 43 Dimitrie Mangeron str., 700050, Iasi

• https://orcid.org/0000-0002-1734-9060

autor

Rusu Oana

• Gheorghe Asachi University of Iasi, Faculty of Materials Science and Engineering, 43 Dimitrie Mangeron str., 700050, Iasi

• https://orcid.org/0000-0002-1113-3859

autor

Cimpoeșu Nicanor

• Gheorghe Asachi University of Iasi, Faculty of Materials Science and Engineering, 43 Dimitrie Mangeron str., 700050, Iasi

• https://orcid.org/0000-0003-4373-017X

Bibliografia

• [1] F. Tudose-Sandu-Ville, Appl. Mech. Mater. 658, 377-380 (2014).
• [2] F. Tudose-Sandu-Ville, IOP Conference Series Materials Science and Engineering 147 (1), 012007 (2016).
• [3] V. Paleu, C.C. Paleu, B. Istrate, S. Bhaumik, C. Munteanu, IOP Conference Series-Materials Science and Engineering 724, 012064 (2020).
• [4] V.V. Savinkin, Z.Z. Zhumekenova, A.V. Sandu, P. Vizureanu, S.V. Savinkin, S.N. Kolisnichenko, O.V. Ivanova, Coatings 11, (12)1441 (2021).
• [5] G.B. Sinclair, J.E. Helms, A review of simple formulae for elastic hoop stresses in cylindrical and spherical pressure vessels: What can be used when, / International Journal of Pressure Vessels and Piping 128, 1-7 (2015).
• [6] M. Panturu, D.L. Chicet, C. Munteanu, B. Istrate, P. Avram, IOP Conference Series-Materials Science and Engineering 444, 032009 (2018).
• [7] G.L. Pintilei, V.I. Crismaru, M. Abrudeanu, C. Munteanu, D. Luca, B. Istrate, Appl. Surf. Sci. 352, 169-177 (2015).
• [8] P. Avram, M.S. Imbrea, B. Istrate, S.I. Strugaru, M. Benchea, C. Munteanu, Indian J. Eng. Mater. S. 21 (3), 315-321 (2014).
• [9] E. Bettini, C. Leygraf, C. Lin, P. Liu, J. Pan, J. Electrochem. Soc. 159, C422-C427 (2012).
• [10] A.O.F. Hayama, P.N. Andrade, A. Cremasco, R.J. Contieri, C.R.M. Afonso, R. Caram, Mater. Des. 55, 1006-1013 (2014).
• [11] C. Liu, E. Zhang, J. Mater. Sci. Mater. Med. 26, 142 (2015).
• [12] EN 10277-2: 2008
• [13] D. Mareci, N. Cimpoesu, M.I. Popa, Materials and Corrosion, 63-11, 176-180 (2012).
• [14] M. Zaharia, S. Stanciu, R. Cimpoeșu, I. Ioniță, N. Cimpoeșu, Appl. Surf. Sci. 438, 20-32 (2018).
• [15] N. Cimpoeşu, F. Săndulache, B. Istrate, R. Cimpoeşu, G. Zegan, Metals 8 (7), 541 (2018).
• [16] J. Izquierdo, G. Bolat, N. Cimpoesu, L C. Trinca, D. Mareci, R.M. Souto, Appl. Surf. Sci. 385, 368-378 (2016).
• [17] N. Cimpoeșu, L.C. Trincă, G. Dascălu, S. Stanciu, S.O. Gurlui, D. Mareci, Journal of Chemistry. Article ID 9520972 (2016)
• [18] A.V. Sandu, Materials 14 (21), 6606 (2021).
• [19] K. Yamanaka, M. Mori, A. Chiba, Mater. Lett. 116, 82-85 (2014).
• [20] S.L.D. Assis, I. Costa, Mater. Corros. 58, 329-333 (2007).
• [21] F. Rosalbino, G. Scavino, Electrochim. Acta 111, 656-662 (2013).
• [22] A.V. Sandu, A. Ciomaga, G. Nemtoi, C. Bejinariu, I. Sandu, Microsc. Res. Techniq. 75, (12) 1711-1716 (2012).
• [23] P. Zieba, M. Chronowski, J. Opara, O.A. Kogtenkova, B.B. Straumal, Discontinuous Dissolution Reaction in a Fe-13.5 at. % Zn Alloy. Materials 14 (8), 1939(2021).
• [24] R. Cimpoesu, P. Vizureanu, I. Stirbu; A. Sodor, G. Zegan, M. Prelipceanu, N. Cimpoesu, N. Ioanid, Corrosion-Resistance Analysis of HA Layer Deposited through Electrophoresis on Ti4Al4Zr Metallic Substrate. Applied Sciences 1 (9), 4198 (2021).

Uwagi

This research was funded by by Ministry of Research, Innovation and Digitization, project FAIR_09/24.11.2020, the Executive Agency for Higher Education, Research, Development and Innovation, UEFISCDI, ROBIM-project number PN-III-P4-ID-PCE2020-0332.