Archives of Civil and Mechanical Engineering - Tom Vol. 21, no. 3 (2021) - BazTech - Yadda

Tom - szczegóły

Tytuł artykułu

Vol. 21, no. 3

Czasopismo

Archives of Civil and Mechanical Engineering

Wydawca

Springer
Wrocław University of Science and Technology

Rocznik

2021

Identyfikatory

Zawartość wolumenu

Vol. 21, no. 3
- artykuł: Silicon carbide nanocomposites reinforced with disordered graphitic carbon formed in situ through oxidation of Ti3C2 MXene during sintering (Petrus M., Woźniak J., Cygan T., Lachowski A., Rozmysłowska-Wojciechowska A., Wojciechowski T., Ziemkowska W., Chlubny L., Jastrzębska A., Adamczyk-Cieślak B., Olszyna A.), s. 1--12
- artykuł: Experimental and numerical investigation on plasticity and fracture behaviors of aluminum alloy 6061-T6 extrusions (Zhu Peihua, Zhang Qilin, Xu Hongjun, Ouyang Yuanwen), s. 13--30
- artykuł: Solid-state welding of ultrafine grained copper rods (Morawiński Łukasz, Jasiński Cezary, Ciemiorek Marta, Chmielewski Tomasz, Olejnik Lech, Lewandowska Małgorzata), s. 31--43
- artykuł: Real-time hybrid test of a LNG storage tank with a variable curvature friction pendulum system (Lin Shu-chao, Wang Jingxuan, Gao Shan, Zhao Hong-tie), s. 44--62
- artykuł: Three-dimensional exact elastic analysis of nanoplates (Wang Guoping, Zhang Yu, Arefi Mohammed), s. 63--76
- artykuł: Effects of equal channel angular pressing and heat treatments on the microstructures and mechanical properties of selective laser melted and cast AlSi10Mg alloys (Snopiński Przemysław, Król Mariusz, Pagáč Marek, Petrů Jana, Hajnyš Jiří, Mikuszewski Tomasz, Tański Tomasz), s. 77--94
- artykuł: Dynamic non-linear Mohr-Coulomb strength criterion for hybrid basalt-polypropylene fibre-reinforced concrete under impact loading (Fu Qiang, Xu Wenrui, Huang Daguan, He Jiaqi, Zhang Lu, Kou Hailei, Niu Ditao), s. 95--113
- artykuł: Detailed micro-modeling of partially grouted reinforced masonry shear walls: extended validation and parametric study (Calderón Sebastián, Sandoval Cristián, Milani Gabriele, Arnau Oriol), s. 114--137
- artykuł: Fracture limit analysis of DP590 steel using single point incremental forming: experimental approach, theoretical modeling and microstructural evolution (Pandre Sandeep, Morchhale Ayush, Mahalle Gauri, Kotkunde Nitin, Suresh Kurra, Singh Swadesh Kumar), s. 138--157
- artykuł: Dynamic damage analysis of a ten-layer circular composite plate subjected to low-velocity impact (Raissi Hamed), s. 158--199
- artykuł: Structural performance of reinforced concrete interior beam-column joints with high-strength bars (Kim Sang-Woo, Chang Hyo-Jun), s. 200--213
- artykuł: Isogeometric nonlinear bending analysis of porous FG composite microplates with a central cutout modeled by the couple stress continuum quasi-3D plate theory (Rao Rui, Sahmani Saeid, Safaei Babak), s. 214--230
- artykuł: Dynamic crushing behavior of closed-cell aluminum foams based on different space-filling unit cells (Talebi S., Hedayati R., Sadighi M.), s. 231--245
- artykuł: Effects of manufacturing methods and production routes on residual stresses of rectangular and square hollow steel sections: a review (Abathun Mehari Zelalem, Han Jingtao, Yu Wang), s. 246--264
- artykuł: The effect of freeze-thaw cycles on flexural behaviour of FRP-reinforced ECC beams (Wang Yi, Wang Guan, Guan Zhongwei, Ashour Ashraf, Ge Wenjie, Zhang Pu, Lu Weigang, Cao Dafu), s. 265--288
- artykuł: Effect of multi-walled carbon nanotubes on the damping property of cement mortar and mechanism analysis (Li Yue, Li Hongwen, Jin Caiyun), s. 289--302
- artykuł: Crashworthiness-based multi-objective integrated optimization of electric vehicle chassis frame (Wang Shuang, Wang Dengfeng), s. 303--320
- artykuł: Numerical and experimental study on the inner diameter uniformity of hollow shafts in cross-wedge rolling with mandrel (Zhou Jing, Shen Jinxia, Wang Baoyu, Huang Xu, Guo Wei), s. 321--336
- artykuł: Experimental study of nanocomposite hybrid adhesive-rivet joints (Nabibi Nabard, Ramezani Shadi), s. 337--365
- artykuł: A physically based constitutive model of Ti-6Al-4 V and application in the SPF/DB process for a pyramid lattice sandwich panel (Wu Yong, Wu Dipeng, Ma Jia, Xiao Wenchao, Zheng Kailun, Chen Minghe), s. 366--382
- artykuł: Effect of rubber particles on impact resistance of concrete at a temperature of - 20 ℃ (Yu Yong, Jin Zuquan, Zhu Han, Song Huamiao), s. 383--396
- artykuł: Prediction of forming limits and microstructural evolution during warm stretch forming of DP590 steel (Pandre Sandeep, Morchhale Ayush, Kotkunde Nitin, Singh Swadesh Kumar, Ravindran Sujith), s. 397--419
- artykuł: Tunnel deformation and stress response under the bilateral foundation pit construction: a case study (Fan Shengyuan, Song Zhanping, Xu Tian, Wang Kaimeng, Zhang Yuwei), s. 420--438
- artykuł: Performance study of precast reinforced concrete shear walls with steel columns containing friction-bearing devices (Fang Qiang, Qiu Hongxing, Sun Jian, Dal Lago Bruno, Jiang Hongbo), s. 439--457
- artykuł: Analysis of thickness variation and stress state in hydroforming of complex T-shaped tubular part of nickel-based superalloy (Cui Xiao-Lei, Yuan Shijian), s. 458--471
- artykuł: Analysis of vane loads and motion in a hydraulic double vane pump with integrated electrical drive (Fiebig Wiesław, Cependa Piotr, Kuczwara Hubert, Wang Feng), s. 472--486
- artykuł: Microstructural and mechanical properties of CFC composite/Ti6Al4V joints brazed with Ag–Cu–Ti and refractory metal foils (Kang Yuhang, Feng Kaimin, Zhang Weitang, Mao Yangwu), s. 487--496
- artykuł: Isogeometric couple stress continuum-based linear and nonlinear flexural responses of functionally graded composite microplates with variable thickness (Yang Zhicheng, Lu Hanwen, Sahmani Saeid, Safaei Babak), s. 497--515
- artykuł: Investigation of modified friction stir clinching-brazing process of AA2024 Al/AZ31 Mg: metallurgical and mechanical properties (Paidar Moslem, Kazemi Amirreza, Mehrez Sadok, Ojo Olatunji Oladimeji, Nasution Mahyuddin Khairuddin Matyuso, Mironov Sergei Nikolaevich), s. 516--532
- artykuł: Numerical simulation for train-track-bridge dynamic interaction considering damage constitutive relation of concrete tracks (Xu Lei, Yu Zhiwu, Shan Zhi), s. 533--555
- artykuł: Statistical damage constitutive model based on the Hoek-Brown criterion (Chen Yifan, Lin Hang, Wang Yixian, Xie Shijie, Zhao Yanlin, Yong Weixun), s. 556--564
- artykuł: Providing a new perspective for obtaining high-quality metal coatings: fabrication and properties studies of TA2 foil on Q235 steel by explosive welding (Xu Junfeng, Yang Ming, Chen Daiguo, Ma Honghao, Shen Zhaowu, Zhang Bingyuan, Tian Jie), s. 565--575
- artykuł: Quantitative Rietveld analysis of the decomposition of hardened rapid sulphoaluminate cement after exposure to elevated temperatures (Tchekwagep Jean Jacques Kouadjo, Chen Dangui, Mukhopadhyay Anol K., Wang Shoude, Huang Shifeng, Cheng Xin), s. 576--594
- artykuł: Processing of commercially pure copper tubes by hydrostatic tube cyclic extrusion–compression (HTCEC) as a new SPD method (Eftekhari M., Faraji G., Bahrami M.), s. 595--606
- artykuł: Influence of curing conditions on the mechanical performance of ultra-high-performance strain-hardening cementitious composites (Kim Min-Jae, Oh Taekgeun, Yoo Doo-Yeol), s. 607--617
- artykuł: Surface properties enhancement of Inconel 718 alloy by ultrasonic roller burnishing coupled with heat treatment (Shen Xuehui, Gong Xianhong, Wang Baolin, He Jianqun, Xu Chonghai, Su Guosheng), s. 618--634
- artykuł: Structural assessment of bridges through ambient noise deconvolution interferometry: application to the lateral dynamic behaviour of a RC multi-span viaduct (García-Macías Enrique, Ubertini Filippo), s. 635--654
- artykuł: Generalized thermoelasticity model of nonlocal strain gradient Timoshenko nanobeams (Yue Xuejie, Yue Xuezheng, Borjalilou Vahid), s. 655--674
- artykuł: Seismic behavior and damage assessment of mid-rise cold-formed steel-framed buildings with normal and reinforced beam-column joints (Jiang Liqiang, Zhang Xingshuo, Ye Jihong, Jiang Lizhong, Zhou Lingyu), s. 675--690
- artykuł: Synergistic effects of alloying, homogenization, and hot extrusion on the mechanical properties of as-cast Mg–Al–Ca magnesium alloys (Nasiri Zahra, Mirzadeh Hamed, Khorrami Mahmoud Sarkari, Emamy Massoud), s. 691--698
- artykuł: Deformation and failure mechanism of deep cement mixing walls: experimental study using physical model tests (Waichita Siriwan, Jongpradist Pornkasem, Patawanit Pongpeera, Jamsawang Pitthaya, Arangelovski Goran, Likitlersuang Suched), s. 699--715
- artykuł: Assessment of modal characteristics of cross-laminated timber beams subject to successive damages (Genç Ali Fuat, Kahya Volkan, Altunışık Ahmet Can, Günaydın Murat, Demirkır Cenk), s. 716--736
- artykuł: Microstructure and mechanical properties of TC4 titanium alloy hollow shaft formed by cross wedge rolling (Feng Pengni, Yang Cuiping, Wang Baoyu, Li Junling, Liu Ronge), s. 737--751
- artykuł: Rehabilitation of RC flexural members in shear with externally bonded fiber-reinforced polymer composites: present status and future need (Kar Swapnasarit, Biswal K. C.), s. 752--775
- artykuł: A multiscale experimental analysis of mechanical properties and deformation behavior of sintered copper-silicon carbide composites enhanced by high-pressure torsion (Nosewicz Szymon, Bazarnik Piotr, Clozel Melanie, Kurpaska Łukasz, Jenczyk Piotr, Jarząbek Dariusz, Chmielewski Marcin, Romelczyk-Baishya Barbara, Lewandowska Malgorzata, Pakieła Zbigniew, Huang Yi, Langdon Terence G.), s. 776--794
- artykuł: Multi-objective optimization of process parameters in cold forging minimizing risk of crack and forging energy (Kitayama Satoshi, Kadoya Shimon, Takano Masahiro, Kobayashi Akio), s. 795--806
- artykuł: Mechanical and thermal stability of retained austenite in plastically deformed bainite-based TRIP-aided medium-Mn steels (Kozłowska Aleksandra, Grajcar Adam, Janik Aleksandra, Radwański Krzysztof, Krupp Ulrich, Matus Krzysztof, Morawiec Mateusz), s. 807--820
- artykuł: Fracture behavior of 7075-T6 aluminum alloy under electromagnetic forming and traditional stamping (Yan Ziqin, Xiao Ang, Cui Xiaohui, Lin Yuhong, Yu Hailiang, Chen Baoguo), s. 821--835
- artykuł: Seismic performance of circular reinforced concrete columns subjected to compression, bending and torsion with low and moderate shear span ratio (Jiao Chiyu, Liu Yang, Wei Biao, Li Jianzhon, Hu Zhangliang, Zhu Gexi), s. 836--851
- artykuł: The decisive impact of microstructure on the machinability of pure copper (Sun Xiaoxiang, Ebrahimi Mahmoud, Attarilar Shokouh), s. 852--860

rozwiń roczniki

JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.