Comprehensive analysis of tribological factor influence on stress-strain and thermal state of workpiece during titanium alloys machining

• Autorzy: Stupnytskyy Vadym , She Xianning

Identyfikatory

DOI

10.24425/ame.2021.137049

• Języki publikacji: EN

Abstrakty

EN

The article describes how different friction coefficients under certain cutting conditions and parameters affect the formation of the stress-strain and thermal states of the product when titanium alloy machining. A new research methodology is used for the study. Firstly, in the initial data for simulation, each time a different declared coefficient of friction is proposed, and every such task of the cutting process modelling is solved for various cutting parameters. The second stage analyzes how these coefficients influence the stress-strain and thermodynamic state of the workpiece and tool during cutting, as well as the tool wear dynamics. In the third stage of the study, ways for ensuring these analytically-grounded tribological cutting conditions are proposed. The analysis of different wear criteria in the simulation models of titanium alloys cutting is carried out. Experimental studies confirm simulation results.

Słowa kluczowe

EN

titanium alloy; cutting; coefficient of friction; stress-strain state; thermal state; simulation of cutting; tool wear

PL

stop tytanu; obróbka; współczynnik tarcia; stan naprężeń i odkształceń; stan termiczny; symulacja obróbki; zużycie narzędzi

• Wydawca: Komitet Budowy Maszyn PAN
• Czasopismo: Archive of Mechanical Engineering
• Rocznik: 2021
• Tom: LXVIII, nr 2
• Strony: 227--248
• Opis fizyczny: Bibliogr. 40 poz., rys., wykr.

Twórcy

autor

Stupnytskyy Vadym

• Lviv Polytechnic National University, Lviv, Ukraine

• https://orcid.org/0000-0003-0006-9932

autor

She Xianning

• Lviv Polytechnic National University, Lviv, Ukraine

• https://orcid.org/0000-0003-1360-210X

Bibliografia

• [1] M. Motyka, W. Ziaja, and J. Sieniawski. Titanium Alloys – Novel Aspects of Their Manufacturing and Processing. IntechOpen, London, 2019.
• [2] A.Í.S. Antonialli, A.E. Diniz, and R. Pederiva. Vibration analysis of cutting force in titanium alloy milling. International Journal of Machine Tools and Manufacture, 50(1):65–74, 2010. doi: 10.1016/j.ijmachtools.2009.09.006.
• [3] Q. Yang, Z. Liu, Z. Shi, and B. Wang. Analytical modeling of adiabatic shear band spacing for serrated chip in high-speed machining. The International Journal of Advanced Manufacturing Technology, 71:1901–1908, 2014. doi: 10.1007/s00170-014-5633-x.
• [4] V.P. Astakhov. Metal Cutting Mechanics. CRC Press, Boca Raton, 1998.
• [5] V.P. Astakhov and J.C. Outeiro. Metal cutting mechanics, finite element modelling. In J.P. Davim (ed), Machining. Fundamentals and Recent Advances, chapter 1, pages 1–27. Springer-Verlag London, 2008. doi: 10.1007/978-1-84800-213-5_1.
• [6] F. Novikov and E. Benin. Determination of conditions ensuring cost price reduction of machinery. Economics of Development, 3(63):69–74, 2012.
• [7] J.P. Davim (ed.). Machining of Titanium Alloys. Springer-Verlag Berlin, Heidelberg, 2014.
• [8] F. Klocke, W. König, and K. Gerschwiler. Advanced machining of titanium- and nickel-based alloys. In: E. Kuljanic (ed.) Advanced Manufacturing Systems and Technology. CISM Courses and Lectures, vol. 372, chapter 1, pages 7–42. Springer, Vienna, 1996. doi: 10.1007/978-3-7091-2678-3_2.
• [9] V.P. Astakhov. Tribology of Metal Cutting. Elsevier, London, 2006.
• [10] J.P. Davim (ed.). Tribology in Manufacturing Technology. Springer, Berlin, Heidelberg, 2013. doi: 10.1007/978-3-642-31683-8.
• [11] S.G. Larsson. The cutting process – A tribological nightmare. Technical Report, Seco Corp., Bern, Switzerland, December 2014. http://cbnexpert.blogspot.com/2014).
• [12] P.L.B. Oxley. Mechanics of Machining: An Analytical Approach to Assessing Machinability, John Wiley & Sons, New York, 1989.
• [13] A. Moufki, D. Dudzinski, and G. Le Coz. Prediction of cutting forces from an analytical model of oblique cutting, application to peripheral milling of Ti-6Al-4V alloy. The International Journal of Advanced Manufacturing Technology, 81:615–626, 2015. doi: 10.1007/s00170-015-7018-1.
• [14] M.J. Bermingham, S. Palanisamy, and M.S. Dargusch. Understanding the tool wear mechanism during thermally assisted machining Ti-6Al-4V. International Journal of Machine Tools and Manufacture, 62:76–87, 2012, doi: 10.1016/j.ijmachtools.2012.07.001.
• [15] O.C. Zienkiewicz, R.L. Taylor, and D.D. Fox. The Finite Element Method for Solid and Structural Mechanics. 7th edition. Butterworth-Heinemann, Oxford, 2014.
• [16] F. Klocke. Manufacturing Processes 1. Cutting. Springer-Verlag, Berlin Heidelberg, 2011. doi: 10.1007/978-3-642-11979-8.
• [17] D.A. Stephenson and J.S. Agapiou. Metal Cutting Theory and Practice. 3rd edition. CRC Press, Boca Raton, 2016.
• [18] H. Shi. Metal Cutting Theory. New Perspectives and New Approaches. Springer, 2018.
• [19] V. Stupnytskyy and I. Hrytsay. Simulation study of cutting-induced residual stress. In: Advances in Design, Simulation and Manufacturing II. DSMIE 2019. Lecture Notes in Mechanical Engineering: 341-350, 2020. doi: 10.1007/978-3-030-22365-6_34.
• [20] N.G. Burago and V.N. Kukudzhanov. About damage and localization of strains. Problems of Strength and Plasticity, 63:40–48, 2001. doi: 10.13140/RG.2.1.4749.9923.
• [21] P.Ståhle, A. Spagnoli, and M. Terzano. On the fracture processes of cutting. Procedia Structural Integrity, 3:468–476, 2017. doi: 10.1016/j.prostr.2017.04.063.
• [22] E. Gdoutos. Fracture Mechanics Criteria and Applications. Springer Netherlands, 1990.
• [23] S.L.M.R. Filho, R.B.D. Pereira, C.H. Lauro, and L.C. Brandao. Investigation and modelling of the cutting forces in turning process of the Ti-6Al-4V and Ti-6Al-7Nb titanium alloys. The International Journal of Advanced Manufacturing Technology, 101:2191–2203, 2019. doi: 10.1007/s00170-018-3110-7.
• [24] A. Pramanik and G. Littlefair. Wire EDM mechanism of MMCs with the variation of reinforced particle size. Materials and Manufacturing Processes, 31(13):1700–1708, 2016. doi: 10.1080/10426914.2015.1117621.
• [25] V. Stupnytskyy and I. Hrytsay. Comprehensive analysis of the product’s operational properties formation considering machining technology. Archive of Mechanical Engineering, 67(2):149–167, 2020. doi: 10.24425/ame.2020.131688.
• [26] T. Obikawa and E. Usui. Computational Mmachining of titanium alloy—finite element modeling and a few results. Journal of Manufacturing Science and Engineering, 118(2):208–215, 1996. doi: 10.1115/1.2831013.
• [27} M. Rahman, Z.-G. Wang, and Y.-S. Wong. A review on high-speed machining of titanium alloys. JSME International Journal Series C Mechanical Systems, Machine Elements and Manufacturing, 49(1):11-20, 2006. doi: 10.1299/jsmec.49.11.
• [28] G. Chen, C. Ren, X. Yang, X. Jin, and T. Guo. Finite element simulation of high-speed machining of titanium alloy (Ti–6Al–4V) based on ductile failure model. The International Journal of Advanced Manufacturing Technology, 56:1027–1038, 2011. doi: 10.1007/s00170-011-3233-6.
• [29] T. Tamizharasan and N. Senthilkumar. Optimization of cutting insert geometry using DEFORM-3D: numerical simulation and experimental validation. International Journal of Simulation Modelling, 11(2):65–76, 2012. doi: 10.2507/IJSIMM11(2)1.200.
• [30] E. Usui, T. Shirakashi, and T.Kitagawa. Analytical prediction of cutting tool wear. Wear, 100 (1-3):129–151, 1984. doi: 10.1016/0043-1648(84)90010-3.
• [31] J.F. Archard. Contact and rubbing of flat surfaces. Journal of Applied Physics, 24:981–988, 1953. doi: 10.1063/1.1721448.
• [32] A.G. Suslov. To the problem of friction and wear of machinery. Journal of Friction and Wear, 5:801-807, 1990.
• [33] P.J. Blau. Amontons’ laws of friction. In: Q.J. Wang, Y.W. Chung. (eds) Encyclopedia of Tribology. Springer, Boston, 2013. doi: 10.1007/978-0-387-92897-5_166.
• [34] P.D. Hartung, B.M. Kramer, and B.F. von Turkovich. Tool wear in titanium machining. CIRP Annals, 31(1):75–80, 1982. doi: 10.1016/S0007-8506(07)63272-7.
• [35] A.G. Kisel’, D.S. Makashin, K.V. Averkov, and A.A. Razhkovskii. Effectiveness and physical characteristics of machining fluid. Russian Engineering Research, 38:508–512, 2018. doi: 10.3103/S1068798X18070092.
• [36] D.V. Evdokimov and M.A. Oleynik. Research of the friction coefficient of titanium and instrumental alloys. Dry and boundary friction. News of Samara Scientific Center of the Russian Academy of Sciences, 22(1):43-46, 2020. doi: 10.37313/1990-5378-2020-22-1-43-46 (in Russian).
• [37] Y. Su, L. Li, G. Wang, and X. Zhong. Cutting mechanism and performance of high-speed machining of a titanium alloy using a super-hard textured tool. Journal of Manufacturing Processes, 34(A):706-712, 2018. 10.1016/j.jmapro.2018.07.004.
• [38] R.B. Da Silva, J.M. Vieira, R.N. Cardoso, H.C. Carvalho, E.S. Costa, A.R. Machado and R.F. De Ávila. Tool wear analysis in milling of medium carbon steel with coated cemented carbide inserts using different machining lubrication/cooling systems. Wear, 271(9-10):2459–2465, 2011. 10.1016/j.wear.2010.12.046.
• [39] S.Y. Hong, I. Markus, and W.-C. Jeong. New cooling approach and tool life improvement in cryogenic machining of titanium alloy Ti-6Al-4V. International Journal of Machine Tools and Manufacture, 41(15):2245–2260, 2001. doi: 10.1016/S0890-6955(01)00041-4.
• [40] V. Stupnytskyy and I. Hrytsay. Computer-aided conception for planning and researching of the functional-oriented manufacturing process. In: Tonkonogyi V. et al. (eds): Advanced Manufacturing Processes. InterPartner 2019. Lecture Notes in Mechanical Engineering, pages 309–320. Springer, Cham, 2020. doi: 10.1007/978-3-030-40724-7_32.

Uwagi

Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2021).