Dynamics of large diameter hydraulic legs under applied test methods

• Autorzy: Stoiński Kazimierz , Płonka Marek , Świątek Janina

Identyfikatory

DOI

10.24425/ams.2022.141457

• Języki publikacji: EN

Abstrakty

EN

The dynamic characteristics of the hydraulic leg are essential for determining the safe working range of roof supports operating in seams threatened by rock mass tremors. The systematic increase in the support of the hydraulic legs due to deteriorating geological-mining conditions has increased their diameters, which currently exceed 0.32 m for the 1st hydraulic stage. Evaluation of the dynamic properties of the roof support and the hydraulic legs are carried out by the Central Mining Institute through calculation methods as an implementation of the Regulation of the Minister of Energy on occupational safety and health. However, the issue of validating the calculations concerning natural scale studies still needs to be addressed. There are significant limitations in this area due to the technical and metrological capabilities of the testing stations. This paper presents an attempt to evaluate bench testing of a hydraulic leg with 0.32 m of the 1st hydraulic stage diameter for the validation of computational and test methods. Results of previous studies affecting the evaluation of the research methods used are also cited. According to the authors, the optimal and economically justifiable direction is to undertake model tests using numerical analyses and to validate these results, based on the study of models of hydraulic legs that are in use at a reduced scale. The construction of testing stations to ensure adequate dynamic loading for the support of the largest diameter hydraulic legs is currently not economically viable. The problem presented, however, is important given the constantly deteriorating geological-mining conditions and the associated threat of rock mass tremors.

Słowa kluczowe

EN

hydraulic leg; dynamic characteristics; roof support; large diameter

PL

podpora hydrauliczna; wstrząs górotworu; prace geologiczno-górnicze

• Wydawca: Instytut Mechaniki Górotworu PAN
• Czasopismo: Archives of Mining Sciences
• Rocznik: 2022
• Tom: Vol. 67, no. 2
• Strony: 259--273
• Opis fizyczny: Bibliogr. 22 poz., fot., rys., tab., wykr.

Twórcy

autor

Stoiński Kazimierz

• Central Mining Institute (GIG), 1 Gwarków Sq., 40-166 Katowice, Poland

• https://orcid.org/0000-0003-2751-9817

autor

Płonka Marek

• Central Mining Institute (GIG), 1 Gwarków Sq., 40-166 Katowice, Poland

• https://orcid.org/0000-0003-2953-1692

autor

Świątek Janina

• Central Mining Institute (GIG), 1 Gwarków Sq., 40-166 Katowice, Poland

• https://orcid.org/0000-0003-2829-9545

Bibliografia

• [1] A. Biliński Method of selection of longwall face and roadway supports for the panelling conditions (in Polish). Prace naukowe – Monografie CMG KOMAG. Gliwice (2005).
• [2] A. Biliński, T. Kostyk, S. Prusek, Rules for the selection of powered support for longwall workings (in Polish). Bezpieczeństwo Pracy i Ochrona Środowiska w Górnictwie 3, 14-17 (1997).
• [3] Gwiazda J.B., Mining hydraulic support resistant to rock bursts (in Polish). Katowice, Wydawnictwo Śląsk (1997).
• [4] T. Janoszek, The assessment of longwall working stability based on the Mohr-Coulomb stress criterion – numerical analysis. Archives of Mining Sciences 65, 3, 493-509 (2020).
• [5] V.I. Klishin T.M. Tarasik, Stand tests of hydraulic props in dynamic loads. Journal of Mining Science 37, 1, 77-84 (2001).
• [6] L.C. Liang, J.J. Tian, H. Zheng, S.J. Jiao, A study on force transmission in a hydraulic support under impact loading on its canopy beam. Journal of the China Coal Society 40, 11, 2522-2527 (2015).
• [7] X.K. Liu, Z.H. Zhao, R. Zhao, Study on dynamic features of leg applied to hydraulic powered support under bumping load. Coal Science and Technology 40, 12, 66-70 (2012).
• [8] W. Masny, Powered support in dynamic load conditions – numerical analysis. Archives of Mining Sciences 65, 3, 453-468 (2020).
• [9] S. Prusek, S. Rajwa, A. Wrana, A. Krzemień, Assessment of roof fall risk in longwall coal mines. International Journal of Mining, Reclamation, and Environment 1-17 (2016).
• [10] S. Prusek, S. Rajwa, A. Walentek, W. Masny, Powered support selection for longwall workings in dynamic load conditions, “3rd International Symposium on Mine Safety Science and Engineering, Montreal” 13-19, (2016).
• [11] S. Prusek, M. Płonka, A. Walentek, Applying the ground reaction curve concept to the assessment of shield support performance in longwall faces. Arab. J. Geosci. 9, 3, 1-15 (2016).
• [12] S. Prusek, S. Rajwa, K. Stoiński, Kriterien zur Abschatzung des Risikos von Strebschaden, Glückauf-Forschungshefte 11, 92-95 (2005).
• [13] S. Rajwa, S. Prusek, K. Stoiński, Description of the method of yelding a shield support (in Polish). Bezpieczeństwo Pracy i Ochrona Środowiska w Górnictwie 12, 3-8 (2016).
• [14] Regulation of the Minister of Energy of November 23, 2016, Journal Of Laws No. 2017, item 1118 § 523 sec. 1, point 1 (in Polish).
• [15] S. Rajwa, W. Masny, A. Wrana, A comprehensive method for the selection of powered roof support in conditions of the rockburst hazard. Wiadomości Górnicze 1, 2-7 (2017).
• [16] G. Shein, Dynamic loads of a powered longwall suport (in Polish). Maszyny Górnicze 92, 5-10 (2002).
• [17] K. Stoiński, Selection of hydraulic prop of longwall support for work in conditions of rock mass tremors hazard. Archives of Mining Sciences 43, 3, 471-486 (1998).
• [18] K. Stoiński, Mining supports in conditions of rock mass tremors hazard (in Polish). Wyd. GIG, Katowice 2000.
• [19] K. Stoiński at al., Mechanized longwall supports for rock tremors hazard conditions (in Polish). Wyd. GIG, Katowice, 2018.
• [20] S. Szweda, Identification of parameters characterizing the load of the powered support section due to the dynamic influence of the rock mass (in Polish). Zeszyty Naukowe Politechniki Śląskiej, Seria Górnictwo 259 (2004).
• [21] J. Świątek, The method to improve the operation of the hydraulic leg of a powered roof support (in Polish). PhD thesis, GIG Katowice (unpublished) (2020).
• [22] Annual report on the state of basic natural and technical hazards in hard coal mining 2019 (in Polish). Praca pod kierunkiem J. Kabiesz. Wyd. GIG, 2019.

Uwagi

PL

Opracowanie rekordu ze środków MEiN, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2022-2023)