PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Discussion over correctness of methods used for test of resistance fuels to ageing processes

Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
Research of usefulness of fuels for long-term storage is an important research of products of special use (meant for stock keeping as national or military reserves). Important fact is that fuels after storage should be used according to their initial use so their phisico-chemical and exploratory properties should remain the same during the whole storage cycle. Basic condition, enabling to foreseen that fuel will keep its quality at sufficient level in certain timeframe should be positive results of ageing tests. Below the doubts are presented whether methodology of evaluation is correct because of important differences in mechanisms of accelerated laboratory tests as well as real storage in typical conditions of storage tanks with large capacity. Differences in courses of chemical reactions and conditions of their initiation and course were pointed out. Scheme of equipment for marking content of existing gums, scheme of equipment for testing induction period, scheme of filtering and oxidizing equipment to test resistance of fuel to oxidation, effectiveness of collisions of molecules of reactants, scheme of chemical ageing process of fuels storaged in different temperature, function for different conditions ageing process of FAME, influence of value of potential molecules energy on initializing of chemical reactions are presented in the paper.
Słowa kluczowe
EN
Twórcy
  • Air Force Institute of Technology Ksiecia Boleslawa Street 6, 01-494 Warszawa, Poland tel./fax: +48 22 6851055
autor
  • Air Force Institute of Technology Ksiecia Boleslawa Street 6, 01-494 Warszawa, Poland tel./fax: +48 22 6851055
Bibliografia
  • [1] Jankowski, A., Modelling of Combustion Processes of Liquid Fuels, Journal of KONES Powertrain and Transport, Vol. 19, No. 4, pp. 239-244, 2012.
  • [2] Jankowski, A., Chosen Problems of Combustion Processes of Advanced Combustion Engine, Journal of KONES Powertrain and Transport, Vol. 20, No. 3, pp. 203-208, 2013.
  • [3] ASTM D381 – Standard Test Method for Gum Content in Fuels by Jet Evaporation.
  • [4] ASTM D525 – Standard Test Method for Oxidation Stability of Gasoline (Induction Period Method).
  • [5] ASTM D2274 – Standard Test Method for Oxidation Stability of Distillate Fuel Oil (Accelerated Method).
  • [6] Kajdas, Cz., Kulczycki, A., Kurzydłowski, K., Molina, G. J., Activation energy of tribochemical and heterogeneous catalytic relations, Materials Science, Vol. 29, Poland 2010.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-1b3cc036-031f-427c-a45c-bc2c6583c34a
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.